[PATCH 2/3] usb: gadget: atmel: Add attach/detach support

Marek Vasut marex at denx.de
Mon Jul 22 13:42:12 CEST 2024


On 7/22/24 10:47 AM, Zixun LI wrote:
> Add controller attach/detach support by using
> usb_gadget_ops.pullup() method.
> 
> Signed-off-by: Zixun LI <zli at ogga.fr>
> ---
>   drivers/usb/gadget/atmel_usba_udc.c | 18 ++++++++++++++++++
>   1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
> index 327e90a786..48d66d9774 100644
> --- a/drivers/usb/gadget/atmel_usba_udc.c
> +++ b/drivers/usb/gadget/atmel_usba_udc.c
> @@ -1176,6 +1176,23 @@ static int usba_disable(struct usba_udc *udc)
>   	return 0;
>   }
>   
> +static int usba_gadget_pullup(struct usb_gadget *g, int is_on)
> +{
> +	struct usba_udc *udc = controller;
> +	u32 ctrl;
> +
> +	ctrl = usba_readl(udc, CTRL);
> +
> +	if (is_on)
> +		ctrl &= ~USBA_DETACH;
> +	else
> +		ctrl |= USBA_DETACH;
> +
> +	usba_writel(udc, CTRL, ctrl);
> +
> +	return 0;
> +}
> +
>   int dm_usb_gadget_handle_interrupts(struct udevice *dev)
>   {
>   	struct usba_udc *udc = controller;
> @@ -1273,6 +1290,7 @@ static const struct usb_gadget_ops usba_udc_ops = {
>   	.get_frame		= usba_udc_get_frame,
>   	.wakeup			= usba_udc_wakeup,
>   	.set_selfpowered	= usba_udc_set_selfpowered,
> +	.pullup			= usba_gadget_pullup,

The function should probably be called usba_udc_pullup() to be 
consistent with the names of the other functions.


More information about the U-Boot mailing list