[PATCH] eth: asix88179: reset during probe
Mattijs Korpershoek
mkorpershoek at baylibre.com
Tue Jul 9 10:39:54 CEST 2024
Hi Caleb,
Thank you for the patch.
On mar., juin 18, 2024 at 16:57, Caleb Connolly <caleb.connolly at linaro.org> wrote:
> In some cases (consistently in my case with an embedded board) the
> ethernet controller will time out on the first init but always succeed
> after reset.
>
> Let's reset the controller during probe so we always start with it in a
> known state, and don't have wait for the first asix_wait_link() to
> time out.
>
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> ---
> I see this behaviour consistently across three Qualcomm platforms that use this
> controller.
> ---
> drivers/usb/eth/asix88179.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/usb/eth/asix88179.c b/drivers/usb/eth/asix88179.c
> index 7bfd285b3aa4..a0aa5c25e428 100644
> --- a/drivers/usb/eth/asix88179.c
> +++ b/drivers/usb/eth/asix88179.c
> @@ -628,8 +628,14 @@ static int ax88179_eth_probe(struct udevice *dev)
>
> usb_dev = priv->ueth.pusb_dev;
> priv->maxpacketsize = usb_dev->epmaxpacketout[AX_ENDPOINT_OUT];
>
> + ret = asix_basic_reset(&priv->ueth, priv);
> + if (ret) {
> + printf("Failed to reset ethernet device\n");
> + return ret;
> + }
> +
> /* Get the MAC address */
> ret = asix_read_mac(&priv->ueth, pdata->enetaddr);
> if (ret)
> return ret;
> --
> 2.45.0
More information about the U-Boot
mailing list