[PATCH v3 5/5] bootstd: Add test for bootmeth_android
Mattijs Korpershoek
mkorpershoek at baylibre.com
Wed Jul 10 10:40:06 CEST 2024
Add a unit test for testing the Android bootmethod.
This requires another mmc image (mmc7) to contain the following partitions:
- misc: contains the Bootloader Control Block (BCB)
- boot_a: contains a fake generic kernel image
- vendor_boot_a: contains a fake vendor_boot image
Also add BOOTMETH_ANDROID as a dependency on sandbox so that we can test
this with:
$ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc7.img
$ ./test/py/test.py --bd sandbox --build -k bootflow_android
Signed-off-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
---
arch/sandbox/dts/test.dts | 8 +++++
configs/sandbox_defconfig | 2 +-
test/boot/bootflow.c | 68 ++++++++++++++++++++++++++++++++++++++--
test/py/tests/test_ut.py | 79 +++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 153 insertions(+), 4 deletions(-)
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index a012f5c4c9ba..5fb5eac862ec 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -43,6 +43,7 @@
mmc4 = "/mmc4";
mmc5 = "/mmc5";
mmc6 = "/mmc6";
+ mmc7 = "/mmc7";
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
@@ -1129,6 +1130,13 @@
filename = "mmc6.img";
};
+ /* This is used for Android tests */
+ mmc7 {
+ status = "disabled";
+ compatible = "sandbox,mmc";
+ filename = "mmc7.img";
+ };
+
pch {
compatible = "sandbox,pch";
};
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index da8c1976d7bd..36e43e0e21ab 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -15,6 +15,7 @@ CONFIG_FIT=y
CONFIG_FIT_RSASSA_PSS=y
CONFIG_FIT_CIPHER=y
CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTMETH_ANDROID=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_MEASURED_BOOT=y
CONFIG_BOOTSTAGE=y
@@ -40,7 +41,6 @@ CONFIG_LOG_MAX_LEVEL=9
CONFIG_LOG_DEFAULT_LEVEL=6
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_STACKPROTECTOR=y
-CONFIG_ANDROID_AB=y
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
CONFIG_CMD_SMBIOS=y
diff --git a/test/boot/bootflow.c b/test/boot/bootflow.c
index 4511cfa7f9bf..8b46256fa48d 100644
--- a/test/boot/bootflow.c
+++ b/test/boot/bootflow.c
@@ -27,6 +27,7 @@
DECLARE_GLOBAL_DATA_PTR;
+extern U_BOOT_DRIVER(bootmeth_android);
extern U_BOOT_DRIVER(bootmeth_cros);
extern U_BOOT_DRIVER(bootmeth_2script);
@@ -518,12 +519,12 @@ BOOTSTD_TEST(bootflow_cmd_boot, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
* @uts: Unit test state
* @mmc_dev: MMC device to use, e.g. "mmc4". Note that this must remain valid
* in the caller until
- * @bind_cros: true to bind the ChromiumOS bootmeth
+ * @bind_cros: true to bind the ChromiumOS and Android bootmeths
* @old_orderp: Returns the original bootdev order, which must be restored
* Returns 0 on success, -ve on failure
*/
static int prep_mmc_bootdev(struct unit_test_state *uts, const char *mmc_dev,
- bool bind_cros, const char ***old_orderp)
+ bool bind_cros_android, const char ***old_orderp)
{
static const char *order[] = {"mmc2", "mmc1", NULL, NULL};
struct udevice *dev, *bootstd;
@@ -545,12 +546,19 @@ static int prep_mmc_bootdev(struct unit_test_state *uts, const char *mmc_dev,
"bootmeth_script", 0, ofnode_null(), &dev));
/* Enable the cros bootmeth if needed */
- if (IS_ENABLED(CONFIG_BOOTMETH_CROS) && bind_cros) {
+ if (IS_ENABLED(CONFIG_BOOTMETH_CROS) && bind_cros_android) {
ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd));
ut_assertok(device_bind(bootstd, DM_DRIVER_REF(bootmeth_cros),
"cros", 0, ofnode_null(), &dev));
}
+ /* Enable the android bootmeths if needed */
+ if (IS_ENABLED(CONFIG_BOOTMETH_ANDROID) && bind_cros_android) {
+ ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd));
+ ut_assertok(device_bind(bootstd, DM_DRIVER_REF(bootmeth_android),
+ "android", 0, ofnode_null(), &dev));
+ }
+
/* Change the order to include the device */
std = dev_get_priv(bootstd);
old_order = std->bootdev_order;
@@ -589,6 +597,37 @@ static int scan_mmc_bootdev(struct unit_test_state *uts, const char *mmc_dev,
return 0;
}
+/**
+ * scan_mmc_android_bootdev() - Set up an mmc bootdev so we can access other
+ * distros. Android bootflow might print "ANDROID:*" while scanning
+ *
+ * @uts: Unit test state
+ * @mmc_dev: MMC device to use, e.g. "mmc4"
+ * Returns 0 on success, -ve on failure
+ */
+static int scan_mmc_android_bootdev(struct unit_test_state *uts, const char *mmc_dev)
+{
+ struct bootstd_priv *std;
+ struct udevice *bootstd;
+ const char **old_order;
+
+ ut_assertok(prep_mmc_bootdev(uts, mmc_dev, true, &old_order));
+
+ console_record_reset_enable();
+ ut_assertok(run_command("bootflow scan", 0));
+ /* Android bootflow might print one or two 'ANDROID:*' logs */
+ ut_check_skipline(uts);
+ ut_check_skipline(uts);
+ ut_assert_console_end();
+
+ /* Restore the order used by the device tree */
+ ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd));
+ std = dev_get_priv(bootstd);
+ std->bootdev_order = old_order;
+
+ return 0;
+}
+
/**
* scan_mmc4_bootdev() - Set up the mmc4 bootdev so we can access a fake Armbian
*
@@ -1160,3 +1199,26 @@ static int bootflow_cros(struct unit_test_state *uts)
return 0;
}
BOOTSTD_TEST(bootflow_cros, 0);
+
+/* Test Android bootmeth */
+static int bootflow_android(struct unit_test_state *uts)
+{
+ if (!IS_ENABLED(CONFIG_BOOTMETH_ANDROID))
+ return -EAGAIN;
+
+ ut_assertok(scan_mmc_android_bootdev(uts, "mmc7"));
+ ut_assertok(run_command("bootflow list", 0));
+
+ ut_assert_nextlinen("Showing all");
+ ut_assert_nextlinen("Seq");
+ ut_assert_nextlinen("---");
+ ut_assert_nextlinen(" 0 extlinux");
+ ut_assert_nextlinen(" 1 android ready mmc 0 mmc7.bootdev.whole ");
+ ut_assert_nextlinen("---");
+ ut_assert_skip_to_line("(2 bootflows, 2 valid)");
+
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_android, 0);
diff --git a/test/py/tests/test_ut.py b/test/py/tests/test_ut.py
index 58205066ec88..05e15830590c 100644
--- a/test/py/tests/test_ut.py
+++ b/test/py/tests/test_ut.py
@@ -11,6 +11,7 @@ import pytest
import u_boot_utils
# pylint: disable=E0611
from tests import fs_helper
+from test_android import test_abootimg
def mkdir_cond(dirname):
"""Create a directory if it doesn't already exist
@@ -423,6 +424,83 @@ def setup_cros_image(cons):
return fname
+def setup_android_image(cons):
+ """Create a 20MB disk image with Android partitions"""
+ Partition = collections.namedtuple('part', 'start,size,name')
+ parts = {}
+ disk_data = None
+
+ def set_part_data(partnum, data):
+ """Set the contents of a disk partition
+
+ This updates disk_data by putting data in the right place
+
+ Args:
+ partnum (int): Partition number to set
+ data (bytes): Data for that partition
+ """
+ nonlocal disk_data
+
+ start = parts[partnum].start * sect_size
+ disk_data = disk_data[:start] + data + disk_data[start + len(data):]
+
+ mmc_dev = 7
+ fname = os.path.join(cons.config.source_dir, f'mmc{mmc_dev}.img')
+ u_boot_utils.run_and_log(cons, 'qemu-img create %s 20M' % fname)
+ u_boot_utils.run_and_log(cons, f'cgpt create {fname}')
+
+ ptr = 40
+
+ # Number of sectors in 1MB
+ sect_size = 512
+ sect_1mb = (1 << 20) // sect_size
+
+ required_parts = [
+ {'num': 1, 'label':'misc', 'size': '1M'},
+ {'num': 2, 'label':'boot_a', 'size': '4M'},
+ {'num': 3, 'label':'boot_b', 'size': '4M'},
+ {'num': 4, 'label':'vendor_boot_a', 'size': '4M'},
+ {'num': 5, 'label':'vendor_boot_b', 'size': '4M'},
+ ]
+
+ for part in required_parts:
+ size_str = part['size']
+ if 'M' in size_str:
+ size = int(size_str[:-1]) * sect_1mb
+ else:
+ size = int(size_str)
+ u_boot_utils.run_and_log(
+ cons,
+ f"cgpt add -i {part['num']} -b {ptr} -s {size} -l {part['label']} -t basicdata {fname}")
+ ptr += size
+
+ u_boot_utils.run_and_log(cons, f'cgpt boot -p {fname}')
+ out = u_boot_utils.run_and_log(cons, f'cgpt show -q {fname}')
+
+ # Create a dict (indexed by partition number) containing the above info
+ for line in out.splitlines():
+ start, size, num, name = line.split(maxsplit=3)
+ parts[int(num)] = Partition(int(start), int(size), name)
+
+ with open(fname, 'rb') as inf:
+ disk_data = inf.read()
+
+ test_abootimg.AbootimgTestDiskImage(cons, 'bootv4.img', test_abootimg.boot_img_hex)
+ boot_img = os.path.join(cons.config.result_dir, 'bootv4.img')
+ with open(boot_img, 'rb') as inf:
+ set_part_data(2, inf.read())
+
+ test_abootimg.AbootimgTestDiskImage(cons, 'vendor_boot.img', test_abootimg.vboot_img_hex)
+ vendor_boot_img = os.path.join(cons.config.result_dir, 'vendor_boot.img')
+ with open(vendor_boot_img, 'rb') as inf:
+ set_part_data(4, inf.read())
+
+ with open(fname, 'wb') as outf:
+ outf.write(disk_data)
+
+ print('wrote to {}'.format(fname))
+
+ return fname
def setup_cedit_file(cons):
infname = os.path.join(cons.config.source_dir,
@@ -478,6 +556,7 @@ def test_ut_dm_init_bootstd(u_boot_console):
setup_bootmenu_image(u_boot_console)
setup_cedit_file(u_boot_console)
setup_cros_image(u_boot_console)
+ setup_android_image(u_boot_console)
# Restart so that the new mmc1.img is picked up
u_boot_console.restart_uboot()
--
2.45.2
More information about the U-Boot
mailing list