[PATCH 6/8] arm64: dts: rockchip: Update WIFi/BT related nodes on rk3308-rock-pi-s
Jonas Karlman
jonas at kwiboo.se
Tue Jul 30 16:51:46 CEST 2024
Update WiFi SDIO and BT UART related props to better reflect details
about the optional onboard RTL8723DS WiFi/BT module.
Also correct the compatible used for bluetooth to match the WiFi/BT
module used on the board.
Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals")
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-14-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
[ upstream commit: 12c3ec878cbe3709782e85b88124abecc3bb8617 ]
(cherry picked from commit caba73747c927b4fdccea3aeb16e077b4e6af006)
---
.../src/arm64/rockchip/rk3308-rock-pi-s.dts | 40 +++++++++++++++++--
1 file changed, 36 insertions(+), 4 deletions(-)
diff --git a/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts b/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
index 5c702f00b27f..62d18ca769a1 100644
--- a/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
@@ -17,6 +17,7 @@
ethernet0 = &gmac;
mmc0 = &emmc;
mmc1 = &sdmmc;
+ mmc2 = &sdio;
};
chosen {
@@ -245,6 +246,20 @@
pinctrl-names = "default";
pinctrl-0 = <&rtc_32k>;
+ bluetooth {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
gmac {
mac_rst: mac-rst {
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -294,11 +309,24 @@
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
- max-frequency = <1000000>;
+ max-frequency = <100000000>;
mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
non-removable;
- sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_1v8>;
status = "okay";
+
+ rtl8723ds: wifi at 1 {
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake>;
+ };
};
&sdmmc {
@@ -330,12 +358,16 @@
};
&uart4 {
+ uart-has-rtscts;
status = "okay";
bluetooth {
- compatible = "realtek,rtl8723bs-bt";
- device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ compatible = "realtek,rtl8723ds-bt";
+ device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
};
};
--
2.45.2
More information about the U-Boot
mailing list