slimbootloader and u-boot payload mmc communication issue

[Sébastien Basset]

Hello,

I try with slimbootloader and u-boot payload to read on mmc, i have this issue:

=> mmc info
sdhci_set_clock: Timeout to wait cmd & data inhibit
sdhci_set_clock: Timeout to wait cmd & data inhibit
sdhci_set_clock: Timeout to wait cmd & data inhibit
CMD_SEND:0
                ARG                      0x00000000
sdhci_send_command: MMC: 0 busy timeout.
                RET                      -70

My setup is CRB cherryboard with alderlake N with slimbootloader and u-boot. With config slimbootloader_defconfig:

CONFIG_X86=y
CONFIG_ENV_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="slimbootloader"
CONFIG_VENDOR_INTEL=y
CONFIG_TARGET_SLIMBOOTLOADER=y
# CONFIG_USE_CAR is not set
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_STOP_STR="s"
CONFIG_AUTOBOOT_KEYED_CTRLC=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="usb start ; if usb storage ; then if fatload usb 0:1 $loadaddr boot.scr; then source $loadaddr ; fi ; else if  mmc list; then if fatload mmc 0:1 $loadaddr boot.scr ; then source $loadaddr ; fi ; fi ; fi"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=532
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_LSBLK=y
CONFIG_CMD_MMC=y
CONFIG_CMD_BKOPS_ENABLE=y
CONFIG_CMD_MMC_SWRITE=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_PXE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_ZFS=y
CONFIG_EFI_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="bzImage"
CONFIG_TFTP_TSIZE=y
CONFIG_BOOTP_SERVERIP=y
CONFIG_USE_ROOTPATH=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
# CONFIG_ACPIGEN is not set
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_MMC_TRACE=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI_ADMA=y
# CONFIG_PCI_PNP is not set
CONFIG_SYS_NS16550_PORT_MAPPED=y
CONFIG_CONSOLE_SCROLL_LINES=5
# CONFIG_GZIP is not set

Have you an good idea?

Best regards,

Sébastien
Sébastien Basset
Senior Embedded Systems Developer

 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Haivision_Logo__200.png
Type: image/png
Size: 1217 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20240710/8d2432a5/attachment.png>