[PATCH V6 6/6] doc: beagle: am62x_beagleplay: Document the use of TIFS Stub
Dhruva Gole
d-gole at ti.com
Fri Jul 19 09:03:13 CEST 2024
* Include the actual common documentation about the TIFS Stub and role
it plays to enable Low Power Modes in the platform.
* Add the AM62x boot flow to show at which point the TIFS Stub actually
gets loaded.
* Mention the TIFS Stub in the TISPL image format.
Signed-off-by: Dhruva Gole <d-gole at ti.com>
---
doc/board/beagle/am62x_beagleplay.rst | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/doc/board/beagle/am62x_beagleplay.rst b/doc/board/beagle/am62x_beagleplay.rst
index 01f04beb55aa..8bd9e4001007 100644
--- a/doc/board/beagle/am62x_beagleplay.rst
+++ b/doc/board/beagle/am62x_beagleplay.rst
@@ -23,7 +23,7 @@ Boot Flow:
----------
Below is the pictorial representation of boot flow:
-.. image:: ../ti/img/boot_diagram_k3_current.svg
+.. image:: ../ti/img/boot_diagram_am62.svg
:alt: Boot flow diagram
- On this platform, 'TI Foundational Security' (TIFS) functions as the
@@ -38,6 +38,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_lpm_firmware
+
Build procedure:
----------------
0. Setup the environment variables:
@@ -86,7 +90,7 @@ Image formats
- tispl.bin
-.. image:: ../ti/img/dm_tispl.bin.svg
+.. image:: ../ti/img/tifsstub_dm_tispl.bin.svg
:alt: tispl.bin image format
Additional hardware for U-Boot development
--
2.34.1
More information about the U-Boot
mailing list