[PATCH v3] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model

[Fabio Estevam]

On Tue, Jun 25, 2024 at 5:26 AM Marek Vasut <marex at denx.de> wrote:
>
> The older i.MX8M Mini Verdin SoMs may came with 20 MHz SPI CAN controller
> oscillator, the newer SoMs always use 40 MHz oscillator. Handle both by
> overriding the oscillator frequency just before booting the kernel.
>
> These are the known variants with 20 MHz oscillator:
> - 0055, V1.1A, V1.1B, V1.1C and V1.1D, use a 20MHz oscillator
> - 0059, V1.1A and V1.1B, use a 20MHz oscillator
>
> Signed-off-by: Marek Vasut <marex at denx.de>

Applied, thanks.