[PATCH] configs: phycore-imx8mp_defconfig: Initialize caam
Leonard Anderweit
l.anderweit at phytec.de
Fri Jul 5 14:11:21 CEST 2024
Initialize the Cryptographic Accelerator and Assurance Module.
Signed-off-by: Leonard Anderweit <l.anderweit at phytec.de>
---
configs/phycore-imx8mp_defconfig | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index e84d761aeb8c..74d381058190 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -33,6 +33,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="oftree"
CONFIG_SYS_CBSIZE=2048
CONFIG_SYS_PBSIZE=2074
+CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_BOARD_INIT=y
@@ -45,6 +46,7 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+# CONFIG_SPL_CRYPTO is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
@@ -87,6 +89,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_CLK_IMX8MP=y
+CONFIG_FSL_CAAM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x42800000
CONFIG_FASTBOOT_BUF_SIZE=0x13000000
@@ -102,7 +105,6 @@ CONFIG_MXC_GPIO=y
CONFIG_DM_I2C=y
# CONFIG_SPL_DM_I2C is not set
CONFIG_SPL_SYS_I2C_LEGACY=y
-CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x51
CONFIG_SUPPORT_EMMC_BOOT=y
@@ -152,3 +154,4 @@ CONFIG_USB_GADGET_MANUFACTURER="PHYTEC"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_IMX_WATCHDOG=y
+# CONFIG_SPL_SHA_HW_ACCEL is not set
--
2.25.1
More information about the U-Boot
mailing list