[PATCH 1/9] include: env: phytec: Create env file for loading and applying overlays

Daniel Schultz d.schultz at phytec.de
Wed Jul 3 07:41:54 CEST 2024


From: Benjamin Hahn <B.Hahn at phytec.de>

The env scripts for loading and applying overlays are identical for many
PHYTEC Boards. Create a common env that can be included.

The env variables bootenv_addr and fdto_addr are board specific and need
to be set in the board specific file. The env variable get_cmd also
needs to be set in board specific files and can be set to tftp or dhcp.

Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
---
 include/env/phytec/overlays.env | 37 +++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 include/env/phytec/overlays.env

diff --git a/include/env/phytec/overlays.env b/include/env/phytec/overlays.env
new file mode 100644
index 00000000000..febb991f4f5
--- /dev/null
+++ b/include/env/phytec/overlays.env
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later  */
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Benjamin Hahn <b.hahn at phytec.de>
+ */
+
+/* Logic to load and apply overlays. Load overlays from bootenv.txt into
+ * environment and apply those overlays.
+ * The variables bootenv_addr and fdto_addr are board specific. */
+
+bootenv=bootenv.txt
+mmc_load_bootenv=load mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
+mmc_load_overlay=load mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
+mmc_apply_overlays=
+	fdt address ${fdt_addr};
+	if test ${no_overlays} = 0; then
+		for overlay in ${overlays};
+		do;
+			if run mmc_load_overlay; then
+				fdt resize ${filesize};
+				fdt apply ${fdto_addr};
+			fi;
+		done;
+	fi;
+net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
+net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
+net_apply_overlays=
+	fdt address ${fdt_addr};
+	if test ${no_overlays} = 0; then
+		for overlay in ${overlays};
+		do;
+			if run net_load_overlay; then
+				fdt resize ${filesize};
+				fdt apply ${fdto_addr};
+			fi;
+		done;
+	fi;
-- 
2.25.1



More information about the U-Boot mailing list