[PATCH v2 1/9] include: env: phytec: Create env file for loading and applying overlays
Daniel Schultz
d.schultz at phytec.de
Wed Jul 17 07:11:26 CEST 2024
From: Benjamin Hahn <B.Hahn at phytec.de>
The env scripts for loading and applying overlays are identical for many
PHYTEC Boards. Create a common env that can be included.
The env variables bootenv_addr and fdto_addr are board specific and need
to be set in the board specific file. The env variable get_cmd also
needs to be set in board specific files and can be set to tftp or dhcp.
Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
Reviewed-by: Teresa Remmet <t.remmet at phytec.de>
Reviewed-by: Wadim Egorov <w.egorov at phytec.de>
---
include/env/phytec/overlays.env | 37 +++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 include/env/phytec/overlays.env
diff --git a/include/env/phytec/overlays.env b/include/env/phytec/overlays.env
new file mode 100644
index 00000000000..febb991f4f5
--- /dev/null
+++ b/include/env/phytec/overlays.env
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Benjamin Hahn <b.hahn at phytec.de>
+ */
+
+/* Logic to load and apply overlays. Load overlays from bootenv.txt into
+ * environment and apply those overlays.
+ * The variables bootenv_addr and fdto_addr are board specific. */
+
+bootenv=bootenv.txt
+mmc_load_bootenv=load mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
+mmc_load_overlay=load mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
+mmc_apply_overlays=
+ fdt address ${fdt_addr};
+ if test ${no_overlays} = 0; then
+ for overlay in ${overlays};
+ do;
+ if run mmc_load_overlay; then
+ fdt resize ${filesize};
+ fdt apply ${fdto_addr};
+ fi;
+ done;
+ fi;
+net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
+net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
+net_apply_overlays=
+ fdt address ${fdt_addr};
+ if test ${no_overlays} = 0; then
+ for overlay in ${overlays};
+ do;
+ if run net_load_overlay; then
+ fdt resize ${filesize};
+ fdt apply ${fdto_addr};
+ fi;
+ done;
+ fi;
--
2.25.1
More information about the U-Boot
mailing list