[PATCH v3 3/4] include: env: ti: mmc: Change name_fdt usage to fdtfile

Manorit Chawdhry m-chawdhry at ti.com
Tue Jul 2 07:20:03 CEST 2024


name_fdt is kept for backward compatibility but it depends on EEPROM
detection logic and some of the TI K3 platforms don't have that anymore
which causes boot failure in legacy boot flow using bootcmd_ti_mmc.

K2g platforms which uses the same file have their own override causing
this change to be no-impact for them.

Replacing name_fdt usage to fdtfile as fdtfile is populated based on
CONFIG_DEFAULT_DEVICE_TREE after using ti_set_fdt_env.

Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>
---
 include/env/ti/mmc.env | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/env/ti/mmc.env b/include/env/ti/mmc.env
index 0256a2d2aaca..037a09010ce4 100644
--- a/include/env/ti/mmc.env
+++ b/include/env/ti/mmc.env
@@ -16,7 +16,7 @@ importbootenv=echo Importing environment from mmc${mmcdev} ...;
 loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
 loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
 loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
-get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
+get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
 envboot=if mmc dev ${mmcdev}; then
 	if mmc rescan; then
 		echo SD/MMC found on device ${mmcdev};

-- 
2.45.1



More information about the U-Boot mailing list