[PATCH 1/4] configs: phycore_am62x_a53: Add more commands

[Wadim Egorov]

Am 01.07.24 um 08:20 schrieb Daniel Schultz:
> Add i2c and rtc commands with all dependencies which are
> required for testing.
> 
> Additionally, add smc and cache commands to boot Zephyr on the A53.
> 
> Signed-off-by: Daniel Schultz <d.schultz at phytec.de>

For this series,

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>

> ---
>   configs/phycore_am62x_a53_defconfig | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/configs/phycore_am62x_a53_defconfig b/configs/phycore_am62x_a53_defconfig
> index 56302383c0f..06b8834e074 100644
> --- a/configs/phycore_am62x_a53_defconfig
> +++ b/configs/phycore_am62x_a53_defconfig
> @@ -1,4 +1,5 @@
>   CONFIG_ARM=y
> +CONFIG_ARM_SMCCC=y
>   CONFIG_ARCH_K3=y
>   CONFIG_SYS_MALLOC_LEN=0x2000000
>   CONFIG_SYS_MALLOC_F_LEN=0x8000
> @@ -63,9 +64,13 @@ CONFIG_SPL_SPI_LOAD=y
>   CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
>   CONFIG_SPL_YMODEM_SUPPORT=y
>   CONFIG_CMD_DFU=y
> +CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_MTD=y
>   CONFIG_CMD_USB=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_RTC=y
> +CONFIG_CMD_SMC=y
>   CONFIG_OF_CONTROL=y
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_MULTI_DTB_FIT=y
> @@ -123,6 +128,8 @@ CONFIG_TI_SCI_POWER_DOMAIN=y
>   CONFIG_K3_SYSTEM_CONTROLLER=y
>   CONFIG_REMOTEPROC_TI_K3_ARM64=y
>   CONFIG_RESET_TI_SCI=y
> +CONFIG_DM_RTC=y
> +CONFIG_RTC_RV3028=y
>   CONFIG_DM_SERIAL=y
>   CONFIG_SOC_DEVICE=y
>   CONFIG_SOC_DEVICE_TI_K3=y