[PATCH v5 18/20] net-lwip: add TFTP_BLOCKSIZE

Ilias Apalodimas ilias.apalodimas at linaro.org
Tue Jul 30 11:57:08 CEST 2024


On Mon, 29 Jul 2024 at 18:18, Jerome Forissier
<jerome.forissier at linaro.org> wrote:
>
> Hi Ilias,
>
> On 7/29/24 14:29, Ilias Apalodimas wrote:
> > Hi Jerome,
> >
> > On Thu, 25 Jul 2024 at 15:59, Jerome Forissier
> > <jerome.forissier at linaro.org> wrote:
> >>
> >> Add support for setting the TFTP block size. The default value (1468)
> >> is fine for Ethernet and allows a better throughput than the TFTP
> >> default (512), if the server supports the blksize option of course.
> >>
> >> I tested this change with qemu_arm64_lwip_defconfig. The throughput is
> >> now 875 KiB/s vs. 313 KiB/s before. That is still a low number, but I
> >> think we can't expect more without implementing the windowsize option.
> >>
> >> Signed-off-by: Jerome Forissier <jerome.forissier at linaro.org>
> >> ---
> >>  net/Kconfig     | 20 ++++++++++----------
> >>  net/lwip/tftp.c |  2 ++
> >>  2 files changed, 12 insertions(+), 10 deletions(-)
> >>
> >> diff --git a/net/Kconfig b/net/Kconfig
> >> index 952690d677d..7e5406bb923 100644
> >> --- a/net/Kconfig
> >> +++ b/net/Kconfig
> >> @@ -69,16 +69,6 @@ config SYS_FAULT_ECHO_LINK_DOWN
> >>           this option is active, then CONFIG_SYS_FAULT_MII_ADDR also needs to
> >>           be configured.
> >>
> >> -config TFTP_BLOCKSIZE
> >> -       int "TFTP block size"
> >> -       default 1468
> >> -       help
> >> -         Default TFTP block size.
> >> -         The MTU is typically 1500 for ethernet, so a TFTP block of
> >> -         1468 (MTU minus eth.hdrs) provides a good throughput with
> >> -         almost-MTU block sizes.
> >> -         You can also activate CONFIG_IP_DEFRAG to set a larger block.
> >> -
> >
> > Why do you have to move the config option?
>
> It is moved from the 'if NET' block to the 'if NET || NET_LWIP' block since
> it now applies to both.
>
> Thanks,
> --
> Jerome
>
> >
> > Cheers
> > /Ilias
> >>  config TFTP_PORT
> >>         bool "Set TFTP UDP source/destination ports via the environment"
> >>         help
> >> @@ -263,4 +253,14 @@ config SYS_RX_ETH_BUFFER
> >>           since all buffers can be full shortly after enabling the interface on
> >>           high Ethernet traffic.
> >>
> >> +config TFTP_BLOCKSIZE
> >> +       int "TFTP block size"
> >> +       default 1468
> >> +       help
> >> +         Default TFTP block size.
> >> +         The MTU is typically 1500 for ethernet, so a TFTP block of
> >> +         1468 (MTU minus eth.hdrs) provides a good throughput with
> >> +         almost-MTU block sizes.
> >> +         You can also activate CONFIG_IP_DEFRAG to set a larger block.
> >> +
> >>  endif   # if NET || NET_LWIP
> >> diff --git a/net/lwip/tftp.c b/net/lwip/tftp.c
> >> index 78de0bd0dba..1fe948c84ec 100644
> >> --- a/net/lwip/tftp.c
> >> +++ b/net/lwip/tftp.c
> >> @@ -136,6 +136,8 @@ static int tftp_loop(struct udevice *udev, ulong addr, char *fname,
> >>         if (!(err == ERR_OK || err == ERR_USE))
> >>                 log_err("tftp_init_client err: %d\n", err);
> >>
> >> +       tftp_client_set_blksize(CONFIG_TFTP_BLOCKSIZE);
> >> +
> >>         ctx.start_time = get_timer(0);
> >>         err = tftp_get(&ctx, &srvip, srvport, fname, TFTP_MODE_OCTET);
> >>         /* might return different errors, like routing problems */
> >> --
> >> 2.40.1
> >>

Reviewed-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>


More information about the U-Boot mailing list