[PATCH V7 7/7] arm: dts: phycore-am62x: Package TIFS Stub

Wadim Egorov w.egorov at phytec.de
Thu Jul 25 11:55:18 CEST 2024


Am 25.07.24 um 11:35 schrieb Dhruva Gole:
> Add support for packaging the TIFS Stub as it's required for basic Low
> Power Modes like Deep Sleep.
> The reason it is packaged using binman and not inherently as part of the
> DM firmware is because for HS devices, customer owns the customer key
> and only customer has access to it.
> DM is release by TI, Since TI doesn't have access to the customer key it
> cannot have a component that is signed by customer key.
> Hence, it's left as part of binman to be signed and packaged.
> 
> While at it, also make sure it's documented in phycore-am62x
> 
> Signed-off-by: Dhruva Gole <d-gole at ti.com>

Thank you,

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>

> ---
>   arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 101 +++++++++++++++++-
>   doc/board/phytec/phycore-am62x.rst            |   2 +-
>   2 files changed, 100 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
> index dbee4aa8d8a5..0961ca66f280 100644
> --- a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
> +++ b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
> @@ -150,12 +150,107 @@
>   			filename = "ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f";
>   		};
>   	};
> +
> +	tifsstub-hs {
> +		filename = "tifsstub.bin_hs";
> +		ti-secure-rom {
> +			content = <&tifsstub_hs_cert>;
> +			core = "secure";
> +			load = <0x40000>;
> +			sw-rev = <CONFIG_K3_X509_SWRV>;
> +			keyfile = "custMpk.pem";
> +			countersign;
> +			tifsstub;
> +		};
> +		tifsstub_hs_cert: tifsstub-hs-cert.bin {
> +			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-cert.bin";
> +			type = "blob-ext";
> +			optional;
> +		};
> +		tifsstub_hs_enc: tifsstub-hs-enc.bin {
> +			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-enc.bin";
> +			type = "blob-ext";
> +			optional;
> +		};
> +	};
> +
> +	tifsstub-fs {
> +		filename = "tifsstub.bin_fs";
> +		tifsstub_fs_cert: tifsstub-fs-cert.bin {
> +			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-cert.bin";
> +			type = "blob-ext";
> +			optional;
> +		};
> +		tifsstub_fs_enc: tifsstub-fs-enc.bin {
> +			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-enc.bin";
> +			type = "blob-ext";
> +			optional;
> +		};
> +
> +	};
> +
> +	tifsstub-gp {
> +		filename = "tifsstub.bin_gp";
> +		ti-secure-rom {
> +			content = <&tifsstub_gp>;
> +			core = "secure";
> +			load = <0x60000>;
> +			sw-rev = <CONFIG_K3_X509_SWRV>;
> +			keyfile = "ti-degenerate-key.pem";
> +			tifsstub;
> +		};
> +		tifsstub_gp: tifsstub-gp.bin {
> +			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-gp.bin";
> +			type = "blob-ext";
> +			optional;
> +		};
> +	};
> +
> +
>   	ti-spl {
>   		insert-template = <&ti_spl_template>;
>   
>   		fit {
>   
>   			images {
> +				tifsstub-hs {
> +					description = "TIFSSTUB";
> +					type = "firmware";
> +					arch = "arm32";
> +					compression = "none";
> +					os = "tifsstub-hs";
> +					load = <0x9dc00000>;
> +					entry = <0x9dc00000>;
> +					blob-ext {
> +						filename = "tifsstub.bin_hs";
> +					};
> +				};
> +
> +				tifsstub-fs {
> +					description = "TIFSSTUB";
> +					type = "firmware";
> +					arch = "arm32";
> +					compression = "none";
> +					os = "tifsstub-fs";
> +					load = <0x9dc00000>;
> +					entry = <0x9dc00000>;
> +					blob-ext {
> +						filename = "tifsstub.bin_fs";
> +					};
> +				};
> +
> +				tifsstub-gp {
> +					description = "TIFSSTUB";
> +					type = "firmware";
> +					arch = "arm32";
> +					compression = "none";
> +					os = "tifsstub-gp";
> +					load = <0x9dc00000>;
> +					entry = <0x9dc00000>;
> +					blob-ext {
> +						filename = "tifsstub.bin_gp";
> +					};
> +				};
>   				dm {
>   					ti-secure {
>   						content = <&dm>;
> @@ -187,7 +282,8 @@
>   				conf-0 {
>   					description = "k3-am625-phyboard-lyra-rdk";
>   					firmware = "atf";
> -					loadables = "tee", "dm", "spl";
> +					loadables = "tee", "tifsstub-hs", "tifsstub-fs",
> +						    "tifsstub-gp", "dm", "spl";
>   					fdt = "fdt-0";
>   				};
>   			};
> @@ -266,7 +362,8 @@
>   				conf-0 {
>   					description = "k3-am625-phyboard-lyra-rdk";
>   					firmware = "atf";
> -					loadables = "tee", "dm", "spl";
> +					loadables = "tee", "tifsstub-hs", "tifsstub-fs",
> +						    "tifsstub-gp", "dm", "spl";
>   					fdt = "fdt-0";
>   				};
>   			};
> diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst
> index af24acf9aac4..56c1fd8354b4 100644
> --- a/doc/board/phytec/phycore-am62x.rst
> +++ b/doc/board/phytec/phycore-am62x.rst
> @@ -32,7 +32,7 @@ Sources
>   
>   .. include::  ../ti/k3.rst
>       :start-after: .. k3_rst_include_start_boot_firmwares
> -    :end-before: .. k3_rst_include_end_boot_firmwares
> +    :end-before: .. k3_rst_include_end_tifsstub
>   
>   Build procedure
>   ---------------


More information about the U-Boot mailing list