[PATCH v2 6/9] include: env: phytec: Add common mmc boot for K3 SoMs

[Daniel Schultz]

This environment include can be used to boot from a
MMC device for PHYTEC's K3-based SoMs.

Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
Reviewed-by: Wadim Egorov <w.egorov at phytec.de>
---
 include/env/phytec/k3_mmc.env | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 include/env/phytec/k3_mmc.env

diff --git a/include/env/phytec/k3_mmc.env b/include/env/phytec/k3_mmc.env
new file mode 100644
index 00000000000..e1208a6eea1
--- /dev/null
+++ b/include/env/phytec/k3_mmc.env
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Daniel Schultz <d.schultz at phytec.de>
+ */
+
+/* Logic for TI K3 based SoCs to boot from a MMC device. */
+
+mmcargs=setenv bootargs console=${console} earlycon=${earlycon}
+	root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw
+loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} Image
+loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
+mmcboot=run mmcargs;
+	mmc dev ${mmcdev};
+	mmc rescan;
+	run loadimage;
+	run loadfdt;
+	booti ${loadaddr} - ${fdt_addr_r}
-- 
2.25.1