[PATCH v1 1/2] dm: exynos: Correct CONFIG_SYS_BOARD setting for Odroid XU3 boards

[Minkyu Kang]

Hi,


2024년 7월 13일 (토) 16:51, Anand Moon <linux.amoon at gmail.com>님이 작성:

> Hi All,
>
> On Wed, 26 Jun 2024 at 21:07, Sam Protsenko <semen.protsenko at linaro.org>
> wrote:
> >
> > On Wed, Jun 26, 2024 at 10:15 AM Anand Moon <linux.amoon at gmail.com>
> wrote:
> > >
> > > Fix the issue where CONFIG_SYS_BOARD was incorrectly set on
> > > Odroid XU3 boards, causing boot failure. This was resolved by
> > > correcting the SYS_BOARD entry in Kconfig to load the correct
> > > device tree source (dts) for the Odroid Exynos5422 Platforms.
> > >
> > > Fixes: f76750d11133 ("Convert CONFIG_CONS_INDEX et al to Kconfig")
> > > Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> > > ---
> > > U-Boot 2024.07-rc5-00042-g80a111f426 (Jun 26 2024 - 15:03:09 +0530)
> for ODROID-XU3/XU4/HC1/HC2
> > >
> > > CPU:   Exynos5422 @ 800 MHz
> > > DRAM:  2 GiB
> > > Core:  74 devices, 12 uclasses, devicetree: separate
> > > MMC:   mmc at 12200000: 0, mmc at 12220000: 2
> > > Loading Environment from MMC... Reading from MMC(2)... *** Warning -
> bad CRC, using default environment
> > >
> > > In:    serial
> > > Out:   serial
> > > Err:   serial
> > > Model: Odroid XU3/XU4/HC1/HC2 based on Exynos5422
> > > Type:  xu4
> > > Boot device: MMC(2)
> > > Net:   No ethernet found.
> > > Hit any key to stop autoboot:  0
> > > switch to partitions #0, OK
> > > mmc2 is current device
> > > Scanning mmc 2:1...
> > > Found U-Boot script /boot/boot.scr
> > > 2046 bytes read in 22 ms (90.8 KiB/s)
> > > 8104280 bytes read in 519 ms (14.9 MiB/s)
> > > Failed to load '/boot/dtbs/exynos5422-smdk5420xu4.dtb'
> > > SCRIPT FAILED: continuing...
> > > No EFI system partition
> > > No EFI system partition
> > > Failed to persist EFI variables
> > > No EFI system partition
> > > Failed to persist EFI variables
> > > No EFI system partition
> > > Failed to persist EFI variables
> > > Loading Boot0000 'mmc 2' failed
> > > EFI boot manager: Cannot load any image
> > > MMC Device 1 not found
> > > no mmc device at slot 1
> > > ---
> >
> > Reviewed-by: Sam Protsenko <semen.protsenko at linaro.org>
> >
> Thanks
>
> Gentle ping?
>
> Thanks
> -Anand


applied to u-boot-samsung.

Thanks.
Minkyu Kang.