[PATCH v2 21/21] upl: Add an end-to-end test

Simon Glass sjg at chromium.org
Sat Jul 13 09:00:55 CEST 2024


Now that sandbox_vpl supports UPL, add a test that checks that the
payload can be loaded by SPL and the handoff information passed through
to U-Boot proper.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v2:
- Support CI testing
- Rework to use alist instead of fixed-length arrays

 MAINTAINERS               |  1 +
 test/boot/upl.c           | 28 ++++++++++++++++++++++++++++
 test/py/tests/test_upl.py | 17 +++++++++++++++--
 3 files changed, 44 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 96faa9e1acc..e89d166709d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1705,6 +1705,7 @@ F:	doc/usage/upl.rst
 F:	doc/usage/cmd/upl.rst
 F:	include/upl.h
 F:	test/boot/upl.c
+F:	test/py/tests/test_upl.py
 
 USB
 M:	Marek Vasut <marex at denx.de>
diff --git a/test/boot/upl.c b/test/boot/upl.c
index c55f1d297d1..9ec2540f455 100644
--- a/test/boot/upl.c
+++ b/test/boot/upl.c
@@ -398,6 +398,34 @@ static int upl_test_read_write(struct unit_test_state *uts)
 }
 UPL_TEST(upl_test_read_write, UT_TESTF_CONSOLE_REC);
 
+/* Test UPL passthrough */
+static int upl_test_info_norun(struct unit_test_state *uts)
+{
+	const struct upl_image *img;
+	struct upl *upl = gd_upl();
+	const void *fit;
+
+	ut_assertok(run_command("upl info -v", 0));
+	ut_assert_nextline("UPL state: active");
+	ut_assert_nextline("fit %lx", upl->fit);
+	ut_assert_nextline("conf_offset %x", upl->conf_offset);
+	ut_assert_nextlinen("image 0");
+	ut_assert_console_end();
+
+	/* check the offsets */
+	fit = map_sysmem(upl->fit, 0);
+	ut_asserteq_str("conf-1", fdt_get_name(fit, upl->conf_offset, NULL));
+
+	ut_asserteq(1, upl->image.count);
+
+	img = alist_get(&upl->image, 0, struct upl_image);
+	ut_asserteq_str("firmware-1", fdt_get_name(fit, img->offset, NULL));
+	ut_asserteq(CONFIG_TEXT_BASE, img->load);
+
+	return 0;
+}
+UPL_TEST(upl_test_info_norun, UT_TESTF_CONSOLE_REC | UT_TESTF_MANUAL);
+
 int do_ut_upl(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
 	struct unit_test *tests = UNIT_TEST_SUITE_START(upl_test);
diff --git a/test/py/tests/test_upl.py b/test/py/tests/test_upl.py
index 171079f8dba..3164bda6b71 100644
--- a/test/py/tests/test_upl.py
+++ b/test/py/tests/test_upl.py
@@ -10,6 +10,15 @@ import u_boot_utils
 
 @pytest.mark.boardspec('sandbox_vpl')
 def test_upl_handoff(u_boot_console):
+    """Test of UPL handoff
+
+    This works by starting up U-Boot VPL, which gets to SPL and then sets up a
+    UPL handoff using the FIT containing U-Boot proper. It then jumps to U-Boot
+    proper and runs a test to check that the parameters are correct.
+
+    The entire FIT is loaded into memory in SPL (in upl_load_from_image()) so
+    that it can be inpected in upl_test_info_norun
+    """
     cons = u_boot_console
     ram = os.path.join(cons.config.build_dir, 'ram.bin')
     fdt = os.path.join(cons.config.build_dir, 'u-boot.dtb')
@@ -17,9 +26,13 @@ def test_upl_handoff(u_boot_console):
     # Remove any existing RAM file, so we don't have old data present
     if os.path.exists(ram):
         os.remove(ram)
-    flags = ['-m', ram, '-d', fdt]
+    flags = ['-m', ram, '-d', fdt, '--upl']
     cons.restart_uboot_with_flags(flags, use_dtb=False)
 
     # Make sure that Universal Payload is detected in U-Boot proper
     output = cons.run_command('upl info')
-    assert output == 'UPL state: active'
+    assert 'UPL state: active' == output
+
+    # Check the FIT offsets look correct
+    output = cons.run_command('ut upl -f upl_test_info_norun')
+    assert 'Failures: 0' in output
-- 
2.34.1



More information about the U-Boot mailing list