M68K Vectors
Peter LaDow
pladow at gmail.com
Mon Jul 29 16:58:49 CEST 2024
I tried both the gcc-12.2 and the gcc-14.1, and both exhibit the same
problem I am seeing. And I tried it with the M5373EVB which is
included w/ u-boot.
>From the arch/m68k/cpu/mcf530x/start.S:
_vectors:
.long 0x00000000
#if defined(CONFIG_M5307) && \
(CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE)
.long _start - CONFIG_TEXT_BASE
#else
.long _START
#endif
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
$ m68k-linux-objdump -s u-boot
u-boot: file format elf32-m68k
Contents of section .text:
00000 00000000 00000000 0000050c 0000050c ................
00010 0000050c 0000050c 0000050c 0000050c ................
Note the reset vector at offset 0x4 is 0x00000000, when it should be
0x00000400. This is true in both cases. But _start (and _START which
is #defined to _start above)
$ m68k-linux-nm -n u-boot
00000000 A __fixup_entries
00000000 A __got2_entries
00000000 t INITSP
00000000 t _vectors
00000004 t INITPC
00000008 t vector02_0F
00000040 t vector10_17
00000060 t vector18_1F
00000080 t vector20_2F
000000c0 t vector30_3F
00000100 t vector64_127
00000200 t vector128_191
00000300 t vector192_255
00000400 T _start
So even here we see the _start relocation not set correctly.
However, I do notice something very different in how board_init.c is
compiled. The M5373EVB compiles with what appear to be some sort of
trampolines.
>From the 5373 (compiled with -mcpu=5329):
000114fe <board_init_f_init_reserve>:
114fe: 2f0d movel %a5,%sp at -
11500: 206d 00a0 moveal %a5@(160),%a0
11504: 2f02 movel %d2,%sp at -
11506: 242f 000c movel %sp@(12),%d2
1150a: 4878 00c0 pea c0 <vector30_3F>
1150e: 42a7 clrl %sp at -
11510: 2f02 movel %d2,%sp at -
11512: 4e90 jsr %a0@
Notice at 0x11500 it loads %a0 with an offset from %a5. And in
_start, it loads %a5 with __got_start. So some sort of global
relocation table is used to call memset.
But for my board, compiled with the exact same options except -mcpu=548x, I get:
0000f5da <board_init_f_init_reserve>:
f5da: 2f02 movel %d2,%sp at -
f5dc: 242f 0008 movel %sp@(8),%d2
f5e0: 4878 00c0 pea c0 <_vectors+0xc0>
f5e4: 42a7 clrl %sp at -
f5e6: 2f02 movel %d2,%sp at -
f5e8: 61ff 0001 4622 bsrl 23c0c <_etext+0x138>
Which is a relative branch (bsrl).
The compilation command line is identical except for -mcpu. Even the
linker command line is identical except for paths to the object files.
On Sun, Jul 28, 2024 at 2:04 PM Angelo Dureghello
<angelo at kernel-space.org> wrote:
>
> Hi Peter,
>
> glad to hear you solved.
>
> As a toolchain i use those provided by kernel.org:
>
> /opt/toolchains/m68k/gcc-12.2.0-nolibc/m68k-linux/bin/m68k-linux-
>
> https://cdn.kernel.org/pub/tools/crosstool/
>
> Just out of curiosity, what's the cpu model you used ?
>
>
> Regards,
> Angelo Dureghello
>
>
> On 26/07/24 10:22 PM, Peter LaDow wrote:
> > Scratch that. I forgot I hard coded the vector table with 0x400 to
> > test things. Restoring _start still results in 0x00000000 for the
> > reset vector.
> >
> > On Fri, Jul 26, 2024 at 1:16 PM Peter LaDow <pladow at gmail.com> wrote:
> >> I should mention I was using the gcc-m68k-linux-gnu package on Ubuntu
> >> 22.04.4, which pulled in gcc-11-m68k-linux-gnu.
> >>
> >> I just downloaded the bootlin m68k-coldfire--uclibc--stable-2024.02-1,
> >> and tried that. It generates the proper value in the vector table
> >> (0x400 for _start). But the call to memset is still bad:
> >>
> >> 0000f5da <board_init_f_init_reserve>:
> >> f5da: 2f02 movel %d2,%sp at -
> >> f5dc: 242f 0008 movel %sp@(8),%d2
> >> f5e0: 4878 00c0 pea c0 <_vectors+0xc0>
> >> f5e4: 42a7 clrl %sp at -
> >> f5e6: 2f02 movel %d2,%sp at -
> >> f5e8: 61ff 0001 4622 bsrl 23c0c <_etext+0x138>
> >> f5ee: 2f02 movel %d2,%sp at -
> >> f5f0: 61ff ffff ffd2 bsrl f5c4 <arch_setup_gd>
> >> f5f6: 0682 0000 00c0 addil #192,%d2
> >> f5fc: 4fef 0010 lea %sp@(16),%sp
> >> f600: 2047 moveal %d7,%a0
> >> f602: 2142 00a0 movel %d2,%a0@(160)
> >> f606: 241f movel %sp at +,%d2
> >> f608: 4e75 rts
> >>
> >> Note "bsrl 23c0c" which points beyond _etext.
> >>
> >> On Fri, Jul 26, 2024 at 12:59 PM Fabio Estevam <festevam at gmail.com> wrote:
> >>> Adding the Coldfire maintainers on Cc.
> >>>
> >>> On Fri, Jul 26, 2024 at 4:46 PM Peter LaDow <pladow at gmail.com> wrote:
> >>>> After some digging it appears that this is a toolchain issue. It seems the
> >>>> linker fixups are sometimes not computed correctly. For example, in
> >>>> board_init_f_init_reserve, the object file disassembled has:
> >>>>
> >>>> 00000000 <board_init_f_init_reserve>:
> >>>> 0: 2f02 movel %d2,%sp at -
> >>>> 2: 242f 0008 movel %sp@(8),%d2
> >>>> 6: 4878 00c0 pea c0 <board_init_f_init_reserve+0xc0>
> >>>> a: 42a7 clrl %sp at -
> >>>> c: 2f02 movel %d2,%sp at -
> >>>> e: 61ff 0000 0000 bsrl 10 <board_init_f_init_reserve+0x10>
> >>>> 14: 2f02 movel %d2,%sp at -
> >>>> 16: 61ff 0000 0000 bsrl 18 <board_init_f_init_reserve+0x18>
> >>>> 1c: 0682 0000 00c0 addil #192,%d2
> >>>> 22: 4fef 0010 lea %sp@(16),%sp
> >>>> 26: 2047 moveal %d7,%a0
> >>>> 28: 2142 00a0 movel %d2,%a0@(160)
> >>>> 2c: 241f movel %sp at +,%d2
> >>>> 2e: 4e75 rts
> >>>>
> >>>> But when I disassemble the final linked u-boot output:
> >>>>
> >>>> 0000f646 <board_init_f_init_reserve>:
> >>>> f646: 2f02 movel %d2,%sp at -
> >>>> f648: 242f 0008 movel %sp@(8),%d2
> >>>> f64c: 4878 00c0 pea c0 <_vectors+0xc0>
> >>>> f650: 42a7 clrl %sp at -
> >>>> f652: 2f02 movel %d2,%sp at -
> >>>> f654: 61ff 0001 44da bsrl 23b30 <_etext+0x138>
> >>>> f65a: 2f02 movel %d2,%sp at -
> >>>> f65c: 61ff ffff ffd2 bsrl f630 <arch_setup_gd>
> >>>> f662: 0682 0000 00c0 addil #192,%d2
> >>>> f668: 4fef 0010 lea %sp@(16),%sp
> >>>> f66c: 2047 moveal %d7,%a0
> >>>> f66e: 2142 00a0 movel %d2,%a0@(160)
> >>>> f672: 241f movel %sp at +,%d2
> >>>> f674: 4e75 rts
> >>>>
> >>>> Note the pea c0 instruction. The object file has
> >>>> board_init_f_init_reserve+0xc0 as the argument, but the final linker has
> >>>> 0xc0, meaning board_init_f_init_reserve is being set to 0 after linking.
> >>>>
> >>>> Also, note the first bsrl instruction, which is not setup correctly
> >>>> either. This is a call to memset. This points to _etext+0x138, which is
> >>>> not a code region Note that 0x239f8 + 0x138 = 0x23b30. But in the final
> >>>> uboot, memset is at 0x1f030.
> >>>>
> >>>> In the call to memset(), objdump shows the relocation:
> >>>>
> >>>> RELOCATION RECORDS FOR [.text.board_init_f_init_reserve]:
> >>>> OFFSET TYPE VALUE
> >>>> 00000010 R_68K_PLT32 memset
> >>>> 00000018 R_68K_PLT32 arch_setup_gd
> >>>>
> >>>> So it seems only when linking outside the same compilation unit that the
> >>>> relocations aren't set correctly.
> >>>>
> >>>> I'm not sure where to look for a solution. Or how to search for an
> >>>> answer. I've done some digging on Google, but nothing points to a clear
> >>>> answer. Anyone seen something similar?
> >>>>
> >>>> To love for the sake of being loved is human, but to love for the sake of
> >>>> loving is angelic. -- Alphonse de Lamartine.
> >>>>
> >>>>
> >>>> On Thu, Jul 25, 2024 at 14:35 Peter LaDow <pladow at gmail.com> wrote:
> >>>>> I'm trying to add support for a custom Colfire based board. I have
> >>>>> things building, but the final linked vectors in start.S do not point
> >>>>> to _start. In start.S I have:
> >>>>>
> >>>>> _vectors:
> >>>>> .long 0x00000000 /* Flash offset is 0 until we setup CS0 */
> >>>>> .long _START
> >>>>>
> >>>>> .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
> >>>>> .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
> >>>>> .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
> >>>>>
> >>>>> Dumping the symbols in the final u-boot yields:
> >>>>>
> >>>>> $ m68k-linux-gnu-nm -n u-boot
> >>>>> 00000000 A __fixup_entries
> >>>>> 00000000 A __got2_entries
> >>>>> 00000000 t _vectors
> >>>>> 00000400 T _start
> >>>>> 0000047e T relocate_code
> >>>>> 000004ae t fixloop
> >>>>>
> >>>>> But then dumping the raw binary:
> >>>>>
> >>>>> u-boot: file format elf32-m68k
> >>>>>
> >>>>> Contents of section .text:
> >>>>> 00000 00000000 00000000 00000516 00000516 ................
> >>>>> 00010 00000516 00000516 00000516 00000516 ................
> >>>>> 00020 00000516 00000516 00000516 00000516 ................
> >>>>> 00030 00000516 00000516 00000516 00000516 ................
> >>>>>
> >>>>> Note at offset 4 it is 0x00000000, not 0x00000400 as I'd expect.
> >>>>>
> >>>>> The final linker script has:
> >>>>>
> >>>>> OUTPUT_ARCH(m68k)
> >>>>> ENTRY(_start)
> >>>>> SECTIONS
> >>>>> {
> >>>>> .text :
> >>>>> {
> >>>>> arch/m68k/cpu/mcf548x/start.o (.text*)
> >>>>> . = DEFINED(env_offset) ? env_offset : .; env/embedded.o(.text*);
> >>>>> *(.text*)
> >>>>> }
> >>>>>
> >>>>>
> >>>>> It is difficult to search the archives, and so far I haven't found
> >>>>> anything. Any help would be appreciated.
> >>>>>
> >>>>> --
> >>>>> To love for the sake of being loved is human, but to love for the sake
> >>>>> of loving is angelic. -- Alphonse de Lamartine.
> >>
> >>
> >> --
> >> To love for the sake of being loved is human, but to love for the sake
> >> of loving is angelic. -- Alphonse de Lamartine.
> >
> >
--
To love for the sake of being loved is human, but to love for the sake
of loving is angelic. -- Alphonse de Lamartine.
More information about the U-Boot
mailing list