[PATCH v2 3/9] phycore_imx93: include common overlays.env

[Daniel Schultz]

From: Benjamin Hahn <B.Hahn at phytec.de>

Include the common overlays env file for phycore_imx93.
The common overlays env file supports disabling loading overlays by
setting the no_overlays variable.

Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
Reviewed-by: Wadim Egorov <w.egorov at phytec.de>
---
 board/phytec/phycore_imx93/phycore_imx93.env | 25 ++------------------
 1 file changed, 2 insertions(+), 23 deletions(-)

diff --git a/board/phytec/phycore_imx93/phycore_imx93.env b/board/phytec/phycore_imx93/phycore_imx93.env
index 27bfadfa140..09542f5aa7d 100644
--- a/board/phytec/phycore_imx93/phycore_imx93.env
+++ b/board/phytec/phycore_imx93/phycore_imx93.env
@@ -1,5 +1,7 @@
 /* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
 
+#include <env/phytec/overlays.env>
+
 image=Image
 console=ttyLP0
 fdt_addr=0x83000000
@@ -7,8 +9,6 @@ fdto_addr=0x830c0000
 bootenv_addr=0x83500000
 fdt_file=CONFIG_DEFAULT_FDT_FILE
 ip_dyn=yes
-bootenv=bootenv.txt
-mmc_load_bootenv=fatload mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
 mmcdev=CONFIG_SYS_MMC_ENV_DEV
 mmcpart=1
 mmcroot=2
@@ -17,16 +17,6 @@ mmcargs=setenv bootargs console=${console},${baudrate} earlycon
 	root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
 loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
 loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
-mmc_load_overlay=fatload mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
-mmc_apply_overlays=
-	fdt address ${fdt_addr};
-	for overlay in ${overlays};
-	do;
-		if run mmc_load_overlay; then
-			fdt resize ${filesize};
-			fdt apply ${fdto_addr};
-		fi;
-	done;
 mmcboot=
 	echo Booting from mmc ...;
 	if run mmc_load_bootenv; then
@@ -42,17 +32,6 @@ mmcboot=
 nfsroot=/nfs
 netargs=setenv bootargs console=${console},${baudrate} earlycon
 	root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
-net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
-net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
-net_apply_overlays=
-	fdt address ${fdt_addr};
-	for overlay in ${overlays};
-	do;
-		if run net_load_overlay; then
-			fdt resize ${filesize};
-			fdt apply ${fdto_addr};
-		fi;
-	done;
 netboot=
 	echo Booting from net ...;
 	run netargs;
-- 
2.25.1