[PATCH v2] rockchip: bring-up to Radxa Rock 3C board

Jonas Karlman jonas at kwiboo.se
Sun Jul 21 21:38:31 CEST 2024


Hi Maxim,

On 2024-07-21 16:53, Maxim Moskalets wrote:
> Just copy of rock-3a-rk3568_defconfig with dts for rock-3c-rk3566.
> Separated from the original due to the use of different DTS, than
> fixed primarily network support.

What does this reference to? There has never been support for ROCK 3C in
U-Boot, so nothing can have been fixed?

Please change the patch subject to something like:

  board: rockchip: Add Radxa ROCK 3C

and add some details about what board revision you have tested on.

Also this is missing an entry in rockchip.rst:

     - Radxa ROCK 3C (rock-3c-rk3566)

and an entry in a MAINTAINERS-file.

Feel free to add me as maintainer/reviewer of this board and fix/add
below config values to match what I have carried in my tree for a few
months now :-)

Add a file arch/arm/dts/rk3566-rock-3c-u-boot.dtsi with:

---
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

#include "rk356x-u-boot.dtsi"

&sfc {
	flash at 0 {
		bootph-pre-ram;
		bootph-some-ram;
	};
};
---

to enable support for booting from SPI flash.

> 
> Signed-off-by: Maxim Moskalets <maximmosk4 at gmail.com>
> ---
>  configs/rock-3c-rk3566_defconfig | 93 ++++++++++++++++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 configs/rock-3c-rk3566_defconfig
> 
> diff --git a/configs/rock-3c-rk3566_defconfig b/configs/rock-3c-rk3566_defconfig
> new file mode 100644
> index 00000000000..53a98029783
> --- /dev/null
> +++ b/configs/rock-3c-rk3566_defconfig
> @@ -0,0 +1,93 @@
> +CONFIG_ARM=y
> +CONFIG_SKIP_LOWLEVEL_INIT=y
> +CONFIG_COUNTER_FREQUENCY=24000000
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SF_DEFAULT_SPEED=24000000
> +CONFIG_SF_DEFAULT_MODE=0x2000
> +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-rock-3c"
> +CONFIG_ROCKCHIP_RK3568=y
> +CONFIG_ROCKCHIP_SPI_IMAGE=y
> +CONFIG_SPL_SERIAL=y
> +CONFIG_DEBUG_UART_BASE=0xFE660000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
> +CONFIG_SPL_SPI=y
> +CONFIG_SYS_LOAD_ADDR=0xc00800
> +CONFIG_PCI=y
> +CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_FIT_SIGNATURE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_LEGACY_IMAGE_FORMAT=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-rock-3a.dtb"

This should be:

CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-rock-3c.dtb"

> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_MAX_SIZE=0x40000
> +CONFIG_SPL_PAD_TO=0x7f8000
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_SPI_LOAD=y
> +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
> +CONFIG_SPL_ATF=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_POWEROFF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_PMIC=y
> +CONFIG_CMD_REGULATOR=y
> +# CONFIG_SPL_DOS_PARTITION is not set
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_LIVE=y
> +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"

Please add:

CONFIG_SYS_RELOC_GD_ENV_ADDR=y

> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
> +CONFIG_SPL_CLK=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y

Please add:

CONFIG_LED=y
CONFIG_LED_GPIO=y

to support the gpio-leds node.

> +CONFIG_MISC=y
> +CONFIG_SUPPORT_EMMC_RPMB=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_SDMA=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_SF_DEFAULT_BUS=4
> +CONFIG_SPI_FLASH_SFDP_SUPPORT=y

Please add:

CONFIG_SPI_FLASH_GIGADEVICE=y

> +CONFIG_SPI_FLASH_MACRONIX=y

and please add:

CONFIG_SPI_FLASH_WINBOND=y

to maximize support for custom SPI flash modules.

> +CONFIG_SPI_FLASH_XTX=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DWC_ETH_QOS=y
> +CONFIG_DWC_ETH_QOS_ROCKCHIP=y
> +CONFIG_NVME_PCI=y
> +CONFIG_PCIE_DW_ROCKCHIP=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y

Please drop, there is no pwm node enabled in the device tree.

Regards,
Jonas

> +CONFIG_SPL_RAM=y
> +CONFIG_SCSI=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYS_NS16550_MEM32=y
> +CONFIG_ROCKCHIP_SFC=y
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_ERRNO_STR=y



More information about the U-Boot mailing list