[PATCH 03/13] doc: Add a description for bootmeth_extlinux

Mattijs Korpershoek mkorpershoek at baylibre.com
Tue Jul 16 09:17:30 CEST 2024


Hi Simon,

Thank you for the patch.

On lun., juil. 15, 2024 at 11:13, Simon Glass <sjg at chromium.org> wrote:

> Add documentation for the extlinux bootmeth.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>

Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>

Minor nitpicks below, feel free to ignore or apply.

> ---
>
>  doc/develop/bootstd/extlinux.rst | 27 +++++++++++++++++++++++++++
>  doc/develop/bootstd/index.rst    |  1 +
>  doc/develop/bootstd/overview.rst |  2 +-
>  3 files changed, 29 insertions(+), 1 deletion(-)
>  create mode 100644 doc/develop/bootstd/extlinux.rst
>
> diff --git a/doc/develop/bootstd/extlinux.rst b/doc/develop/bootstd/extlinux.rst
> new file mode 100644
> index 00000000000..28490f38899
> --- /dev/null
> +++ b/doc/develop/bootstd/extlinux.rst
> @@ -0,0 +1,27 @@
> +.. SPDX-License-Identifier: GPL-2.0+:
> +
> +Extlinux Bootmeth
> +=================
> +
> +`Extlinux <https://uapi-group.org/specifications/specs/boot_loader_specification>`_
> +(sometimes called syslinux) allows U-Boot to provide a menu of possible
> +Operating Systems from which the user can choose.
> +
> +U-Boot includes a parser for the `extlinux.conf` file. It consists primarily of
> +a list of named OSes along with the kernel, initial ramdisk and other settings.
> +The file is stored in the `extlinux/` subdirectory, possibly under the `boot/`
> +subdirectory. This list of prefixes ({"/", "/boot"} by default) can be selected

Can the prefixes also be surrounded by `` (`{"/", "boot"`} to insist
that this is "code listing" as well ?

> +with the `filename-prefixes` property in the bootstd device.
> +
> +Note that PXE (Preboot eXecution-Environment) uses the same file format, but in
> +a network context.
> +
> +When invoked on a bootdev, this bootmeth searches for the file and creates a
> +bootflow if found.
> +
> +When the bootflow is booted, the bootmeth calls pxe_setup_ctx() to set up the
> +context, then pxe_process() to process the file. Depending on the contents, this

same for pxe_setup_ctx and pxe_process

> +may boot an OS or provide a list of options to the user, perhaps with a timeout.
> +
> +The compatible string "u-boot,extlinux" is used for the driver. The driver is
> +automatically instantiated if there are no bootmeth drivers in the devicetree.
> diff --git a/doc/develop/bootstd/index.rst b/doc/develop/bootstd/index.rst
> index f4f87c7787c..5bbb3d633a3 100644
> --- a/doc/develop/bootstd/index.rst
> +++ b/doc/develop/bootstd/index.rst
> @@ -7,3 +7,4 @@ Standard Boot
>     :maxdepth: 2
>  
>     overview
> +   extlinux
> diff --git a/doc/develop/bootstd/overview.rst b/doc/develop/bootstd/overview.rst
> index 761f61a573b..086a0b1281d 100644
> --- a/doc/develop/bootstd/overview.rst
> +++ b/doc/develop/bootstd/overview.rst
> @@ -412,7 +412,7 @@ Available bootmeth drivers
>  
>  Bootmeth drivers are provided for:
>  
> -   - extlinux / syslinux boot from a disk
> +   - :doc:`extlinux / syslinux <extlinux>` boot from a disk
>     - extlinux boot from a network (PXE)
>     - U-Boot scripts from disk, network or SPI flash
>     - EFI boot using bootefi from disk
> -- 
> 2.34.1


More information about the U-Boot mailing list