[PATCH v4 38/38] doc: samsung: Mention enabled eMMC in E850-96 board doc

[Sam Protsenko]

eMMC is enabled on E850-96 board now. Mention that in the board
documentation.

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
---
Changes in v4:
  - (none)

Changes in v3:
  - (none)

Changes in v2:
  - (none)

 doc/board/samsung/e850-96.rst | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/doc/board/samsung/e850-96.rst b/doc/board/samsung/e850-96.rst
index 0cb95473e536..0a7b6fc0c9dd 100644
--- a/doc/board/samsung/e850-96.rst
+++ b/doc/board/samsung/e850-96.rst
@@ -47,12 +47,13 @@ Build Procedure
 ---------------
 
 .. warning::
-  At the moment both eMMC and USB features are not enabled in U-Boot. Flashing
+  At the moment USB is not enabled in U-Boot for this board. Although eMMC is
+  enabled, you won't be able to flash images over USB (fastboot). So flashing
   U-Boot binary **WILL** effectively brick your board. The ``dltool`` [8]_ can
   be used then to perform USB boot and flash LittleKernel bootloader binary [7]_
   to unbrick and revive the board. Flashing U-Boot binary might be helpful for
   developers or anybody who want to check current state of U-Boot enablement on
-  E850-96 (which is mostly serial console and related blocks).
+  E850-96 (which is mostly serial console, eMMC and related blocks).
 
 Build U-Boot binary from source code (using AArch64 baremetal GCC toolchain):
 
-- 
2.39.2