[PATCH V7 6/7] doc: beagle: am62x_beagleplay: Document the use of TIFS Stub

[Dhruva Gole]

* Include the actual common documentation about the TIFS Stub and role
  it plays to enable Low Power Modes in the platform.
* Add the AM62x boot flow to show at which point the TIFS Stub actually
  gets loaded.
* Mention the TIFS Stub in the TISPL image format.

Signed-off-by: Dhruva Gole <d-gole at ti.com>
---
 doc/board/beagle/am62x_beagleplay.rst | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/doc/board/beagle/am62x_beagleplay.rst b/doc/board/beagle/am62x_beagleplay.rst
index 01f04beb55aa..bc71aabaac3e 100644
--- a/doc/board/beagle/am62x_beagleplay.rst
+++ b/doc/board/beagle/am62x_beagleplay.rst
@@ -23,7 +23,7 @@ Boot Flow:
 ----------
 Below is the pictorial representation of boot flow:
 
-.. image:: ../ti/img/boot_diagram_k3_current.svg
+.. image:: ../ti/img/boot_diagram_am62.svg
   :alt: Boot flow diagram
 
 - On this platform, 'TI Foundational Security' (TIFS) functions as the
@@ -38,6 +38,10 @@ Sources:
     :start-after: .. k3_rst_include_start_boot_sources
     :end-before: .. k3_rst_include_end_boot_sources
 
+.. include::  ../ti/k3.rst
+    :start-after: .. k3_rst_include_start_boot_firmwares
+    :end-before: .. k3_rst_include_end_tifsstub
+
 Build procedure:
 ----------------
 0. Setup the environment variables:
@@ -86,7 +90,7 @@ Image formats
 
 - tispl.bin
 
-.. image:: ../ti/img/dm_tispl.bin.svg
+.. image:: ../ti/img/tifsstub_dm_tispl.bin.svg
   :alt: tispl.bin image format
 
 Additional hardware for U-Boot development
-- 
2.34.1