[PATCH 3/3] rockchip: tiger-rk3588: add PCIe support
Kever Yang
kever.yang at rock-chips.com
Mon Jul 15 09:23:31 CEST 2024
On 2024/7/4 20:53, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at cherry.de>
>
> This enables PCIe support on Tiger as exposed on
> Q7_PCIE[0123]_[RT]X_[PN] signals and more specifically on the `PCI
> Express` connector on the Haikou devkit.
>
> This was tested with a PCIe to NVMe adapter (e.g.
> https://www.amazon.de/dp/B07RZZ3TJG).
>
> Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> configs/tiger-rk3588_defconfig | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig
> index 8fcdd063a3d..8eb1027e449 100644
> --- a/configs/tiger-rk3588_defconfig
> +++ b/configs/tiger-rk3588_defconfig
> @@ -14,6 +14,7 @@ CONFIG_DEBUG_UART_BASE=0xfeb50000
> CONFIG_DEBUG_UART_CLOCK=24000000
> # CONFIG_DEBUG_UART_BOARD_INIT is not set
> CONFIG_SYS_LOAD_ADDR=0xc00800
> +CONFIG_PCI=y
> CONFIG_DEBUG_UART=y
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> @@ -41,6 +42,7 @@ CONFIG_CMD_I2C=y
> # CONFIG_CMD_LOADB is not set
> # CONFIG_CMD_LOADS is not set
> CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> # CONFIG_CMD_SF is not set
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> @@ -89,6 +91,8 @@ CONFIG_PHY_MICREL=y
> CONFIG_PHY_MICREL_KSZ90X1=y
> CONFIG_DWC_ETH_QOS=y
> CONFIG_DWC_ETH_QOS_ROCKCHIP=y
> +CONFIG_NVME_PCI=y
> +CONFIG_PCIE_DW_ROCKCHIP=y
> CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
> CONFIG_PHY_ROCKCHIP_USBDP=y
>
More information about the U-Boot
mailing list