[PATCH next 2/2] rockchip: remove support for Theobroma Systems RK3368 Lion
Kever Yang
kever.yang at rock-chips.com
Tue Jul 16 04:17:46 CEST 2024
On 2024/6/20 18:24, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at cherry.de>
>
> No meaningful changes were made to this SoM since February 2021. Nobody
> from Theobroma has booted anything recent on that product since July
> 2021 at the latest. The product isn't available to buy anymore and
> disappeared from our website.
>
> This product is therefore unmaintained and it would be disingenuous to
> say the opposite, so drop support for RK3368 Lion.
>
> If you're a user of Lion, feel free to revert this patch or contact our
> sales/support department.
>
> Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi | 119 ---------
> arch/arm/dts/rk3368-lion-haikou.dts | 144 -----------
> arch/arm/dts/rk3368-lion.dtsi | 318 ------------------------
> arch/arm/mach-rockchip/rk3368/Kconfig | 22 --
> board/theobroma-systems/lion_rk3368/Kconfig | 18 --
> board/theobroma-systems/lion_rk3368/MAINTAINERS | 10 -
> board/theobroma-systems/lion_rk3368/README | 78 ------
> configs/lion-rk3368_defconfig | 110 --------
> doc/board/rockchip/rockchip.rst | 1 -
> include/configs/lion_rk3368.h | 16 --
> 10 files changed, 836 deletions(-)
>
> diff --git a/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi b/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi
> deleted file mode 100644
> index a3c2b707e9a..00000000000
> --- a/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi
> +++ /dev/null
> @@ -1,119 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+ OR X11
> -/*
> - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
> - */
> -
> -#include "rk3368-u-boot.dtsi"
> -
> -/ {
> - config {
> - u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
> - u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - u-boot,spl-boot-order = &emmc, &sdmmc;
> - };
> -
> - smbios {
> - compatible = "u-boot,sysinfo-smbios";
> -
> - smbios {
> - system {
> - manufacturer = "rockchip";
> - product = "sheep_rk3368";
> - };
> -
> - baseboard {
> - manufacturer = "rockchip";
> - product = "sheep_rk3368";
> - };
> -
> - chassis {
> - manufacturer = "rockchip";
> - product = "sheep_rk3368";
> - };
> - };
> - };
> -};
> -
> -&gpio2 {
> - bootph-all;
> -};
> -
> -&pinctrl {
> - bootph-all;
> -};
> -
> -&service_msch {
> - bootph-all;
> -};
> -
> -&dmc {
> - bootph-all;
> -
> - /*
> - * Validation of throughput using SPEC2000 shows the following
> - * relative performance for the different memory schedules:
> - * - CBDR: 30.1
> - * - CBRD: 29.8
> - * - CRBD: 29.9
> - * Note that the best performance for any given application workload
> - * may vary from the default configured here (e.g. 164.gzip is fastest
> - * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD).
> - *
> - * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for
> - * details on the 'rockchip,memory-schedule' property and how it
> - * affects the physical-address to device-address mapping.
> - */
> - rockchip,memory-schedule = <DMC_MSCH_CBDR>;
> - rockchip,ddr-frequency = <800000000>;
> - rockchip,ddr-speed-bin = <DDR3_1600K>;
> -
> - status = "okay";
> -};
> -
> -&pmugrf {
> - bootph-all;
> -};
> -
> -&sgrf {
> - bootph-all;
> -};
> -
> -&cru {
> - bootph-all;
> -};
> -
> -&grf {
> - bootph-all;
> -};
> -
> -&uart0 {
> - bootph-all;
> -};
> -
> -&emmc {
> - bootph-pre-ram;
> -};
> -
> -&sdmmc {
> - bootph-pre-ram;
> -};
> -
> -&spi1 {
> - bootph-pre-ram;
> -
> - spiflash: w25q32dw at 0 {
> - bootph-pre-ram;
> - };
> -};
> -
> -&timer0 {
> - bootph-all;
> - clock-frequency = <24000000>;
> - status = "okay";
> -};
> -
> -
> diff --git a/arch/arm/dts/rk3368-lion-haikou.dts b/arch/arm/dts/rk3368-lion-haikou.dts
> deleted file mode 100644
> index cae01d35b93..00000000000
> --- a/arch/arm/dts/rk3368-lion-haikou.dts
> +++ /dev/null
> @@ -1,144 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
> - */
> -
> -/dts-v1/;
> -#include "rk3368-lion.dtsi"
> -
> -/ {
> - model = "Theobroma Systems RK3368-uQ7 Baseboard";
> - compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
> -
> - aliases {
> - mmc1 = &sdmmc;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -
> - i2cmux2 {
> - i2c at 0 {
> - eeprom: eeprom at 50 {
> - compatible = "atmel,24c01";
> - pagesize = <8>;
> - reg = <0x50>;
> - };
> - };
> - };
> -
> - leds {
> - pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
> -
> - sd_card_led: led-3 {
> - label = "sd_card_led";
> - gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "mmc0";
> - };
> - };
> -
> - dc_12v: dc-12v {
> - compatible = "regulator-fixed";
> - regulator-name = "dc_12v";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - vcc3v3_baseboard: vcc3v3-baseboard {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_baseboard";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_otg: vcc5v0-otg-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&otg_vbus_drv>;
> - regulator-name = "vcc5v0_otg";
> - regulator-always-on;
> - };
> -};
> -
> -&sdmmc {
> - bus-width = <4>;
> - cap-mmc-highspeed;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - max-frequency = <25000000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> - rockchip,default-sample-phase = <90>;
> - vmmc-supply = <&vcc3v3_baseboard>;
> - status = "okay";
> -};
> -
> -&spi2 {
> - cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
> - status = "okay";
> -};
> -
> -&usb_otg {
> - dr_mode = "otg";
> - status = "okay";
> -};
> -
> -&uart0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> - status = "okay";
> -};
> -
> -&uart1 {
> - /* alternate function of GPIO5/6 */
> - status = "disabled";
> -};
> -
> -&pinctrl {
> - pinctrl-names = "default";
> - pinctrl-0 = <&haikou_pin_hog>;
> -
> - hog {
> - haikou_pin_hog: haikou-pin-hog {
> - rockchip,pins =
> - /* LID_BTN */
> - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
> - /* BATLOW# */
> - <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
> - /* SLP_BTN# */
> - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
> - /* BIOS_DISABLE# */
> - <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - leds {
> - sd_card_led_pin: sd-card-led-pin {
> - rockchip,pins =
> - <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - sdmmc {
> - sdmmc_cd_pin: sdmmc-cd-pin {
> - rockchip,pins =
> - <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - usb_otg {
> - otg_vbus_drv: otg-vbus-drv {
> - rockchip,pins =
> - <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> diff --git a/arch/arm/dts/rk3368-lion.dtsi b/arch/arm/dts/rk3368-lion.dtsi
> deleted file mode 100644
> index bcd7977fb0f..00000000000
> --- a/arch/arm/dts/rk3368-lion.dtsi
> +++ /dev/null
> @@ -1,318 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
> - */
> -
> -/dts-v1/;
> -#include "rk3368.dtsi"
> -
> -/ {
> - aliases {
> - mmc0 = &emmc;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -
> - ext_gmac: gmac-clk {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "ext_gmac";
> - #clock-cells = <0>;
> - };
> -
> - i2cmux1 {
> - compatible = "i2c-mux-gpio";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - i2c-parent = <&i2c1>;
> - mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
> -
> - /* Q7_GPO_I2C */
> - i2c at 0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - /* Q7_SMB */
> - i2c at 1 {
> - reg = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> - };
> -
> - i2cmux2 {
> - compatible = "i2c-mux-gpio";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - i2c-parent = <&i2c2>;
> - mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
> -
> - /* Q7_LVDS_BLC_I2C */
> - i2c at 0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - fan: fan at 18 {
> - compatible = "ti,amc6821";
> - reg = <0x18>;
> - #cooling-cells = <2>;
> - };
> -
> - rtc_twi: rtc at 6f {
> - compatible = "isil,isl1208";
> - reg = <0x6f>;
> - };
> - };
> -
> - /* Q7_GP2_I2C */
> - i2c at 1 {
> - reg = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&module_led_pins>;
> -
> - module_led1: led-1 {
> - label = "module_led1";
> - gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "heartbeat";
> - panic-indicator;
> - };
> -
> - module_led2: led-2 {
> - label = "module_led2";
> - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
> - default-state = "off";
> - };
> - };
> -
> - vcc_sys: vcc-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_sys";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -};
> -
> -&cpu_l0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu_l1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu_l2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu_l3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu_b0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu_b1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu_b2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu_b3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&emmc {
> - bus-width = <8>;
> - clock-frequency = <150000000>;
> - mmc-hs200-1_8v;
> - non-removable;
> - vmmc-supply = <&vcc33_io>;
> - vqmmc-supply = <&vcc18_io>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> - status = "okay";
> -};
> -
> -&gmac {
> - assigned-clocks = <&cru SCLK_MAC>;
> - assigned-clock-parents = <&ext_gmac>;
> - clock_in_out = "input";
> - phy-supply = <&vcc33_io>;
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&rgmii_pins>;
> - snps,reset-active-low;
> - snps,reset-delays-us = <0 10000 50000>;
> - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
> - tx_delay = <0x10>;
> - rx_delay = <0x10>;
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - rk808: pmic at 1b {
> - compatible = "rockchip,rk808";
> - reg = <0x1b>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
> - clock-output-names = "xin32k", "rk808-clkout2";
> - #clock-cells = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
> - rockchip,system-power-controller;
> - vcc1-supply = <&vcc_sys>;
> - vcc2-supply = <&vcc_sys>;
> - vcc3-supply = <&vcc_sys>;
> - vcc4-supply = <&vcc_sys>;
> - vcc6-supply = <&vcc_sys>;
> - vcc7-supply = <&vcc_sys>;
> - vcc8-supply = <&vcc_sys>;
> - vcc9-supply = <&vcc_sys>;
> - vcc10-supply = <&vcc_sys>;
> - vcc11-supply = <&vcc_sys>;
> - vcc12-supply = <&vcc_sys>;
> -
> - regulators {
> - vdd_cpu: DCDC_REG1 {
> - regulator-name = "vdd_cpu";
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vdd_log: DCDC_REG2 {
> - regulator-name = "vdd_log";
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc33_io: DCDC_REG4 {
> - regulator-name = "vcc33_io";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc33_video: LDO_REG2 {
> - regulator-name = "vcc33_video";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vdd10_pll: LDO_REG3 {
> - regulator-name = "vdd10_pll";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc18_io: LDO_REG4 {
> - regulator-name = "vcc18_io";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-boot-on;
> - };
> -
> - vdd10_video: LDO_REG6 {
> - regulator-name = "vdd10_video";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc18_video: LDO_REG8 {
> - regulator-name = "vcc18_video";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> - };
> - };
> -};
> -
> -&i2c1 {
> - status = "okay";
> -};
> -
> -&i2c2 {
> - status = "okay";
> -};
> -
> -&pinctrl {
> - leds {
> - module_led_pins: module-led-pins {
> - rockchip,pins =
> - <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
> - <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> -
> - pmic_sleep: pmic-sleep {
> - rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&spi1 {
> - status = "okay";
> -
> - norflash: flash at 0 {
> - compatible = "jedec,spi-nor";
> - reg = <0>;
> - spi-max-frequency = <50000000>;
> - };
> -};
> -
> -&uart1 {
> - status = "okay";
> -};
> -
> -&uart3 {
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&wdt {
> - status = "okay";
> -};
> diff --git a/arch/arm/mach-rockchip/rk3368/Kconfig b/arch/arm/mach-rockchip/rk3368/Kconfig
> index 3de695186ed..a7be30bbd89 100644
> --- a/arch/arm/mach-rockchip/rk3368/Kconfig
> +++ b/arch/arm/mach-rockchip/rk3368/Kconfig
> @@ -3,27 +3,6 @@ if ROCKCHIP_RK3368
> choice
> prompt "RK3368 board"
>
> -config TARGET_LION_RK3368
> - bool "Theobroma Systems RK3368-uQ7 (Lion) module"
> - select ARCH_EARLY_INIT_R
> - help
> - The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm,
> - MXM-230 connector) system-on-module designed by Theobroma
> - Systems for industrial applications.
> -
> - It provides the following features:
> - - 8x Cortex-A53 (in 2 clusters of 4 cores each)
> - - (on-module) up to 4GB of DDR3 memory
> - - (on-module) SPI-NOR flash
> - - (on-module) eMMC
> - - Gigabit Ethernet (with an on-module KSZ9031 PHY)
> - - USB
> - - HDMI
> - - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group)
> - - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...)
> - - on-module STM32 providing CAN, RTC and fan-control
> - - (optional on-module) EAL4+-certified security module
> -
> config TARGET_SHEEP
> bool "Sheep board"
> help
> @@ -62,7 +41,6 @@ config SPL_LIBCOMMON_SUPPORT
> config SPL_LIBGENERIC_SUPPORT
> default y
>
> -source "board/theobroma-systems/lion_rk3368/Kconfig"
> source "board/rockchip/sheep_rk3368/Kconfig"
> source "board/geekbuying/geekbox/Kconfig"
> source "board/rockchip/evb_px5/Kconfig"
> diff --git a/board/theobroma-systems/lion_rk3368/Kconfig b/board/theobroma-systems/lion_rk3368/Kconfig
> deleted file mode 100644
> index 537a2e7d9af..00000000000
> --- a/board/theobroma-systems/lion_rk3368/Kconfig
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -if TARGET_LION_RK3368
> -
> -config SYS_BOARD
> - default "lion_rk3368"
> -
> -config SYS_VENDOR
> - default "theobroma-systems"
> -
> -config SYS_CONFIG_NAME
> - default "lion_rk3368"
> -
> -config ENV_SIZE
> - default 0x2000
> -
> -config ENV_OFFSET
> - default 0x3c000 if ENV_IS_IN_SPI_FLASH
> -
> -endif
> diff --git a/board/theobroma-systems/lion_rk3368/MAINTAINERS b/board/theobroma-systems/lion_rk3368/MAINTAINERS
> deleted file mode 100644
> index ed35fee6468..00000000000
> --- a/board/theobroma-systems/lion_rk3368/MAINTAINERS
> +++ /dev/null
> @@ -1,10 +0,0 @@
> -LION-RK3368 (RK3368-uQ7 system-on-module)
> -M: Quentin Schulz <quentin.schulz at cherry.de>
> -M: Klaus Goger <klaus.goger at cherry.de>
> -S: Maintained
> -F: board/theobroma-systems/lion_rk3368
> -F: include/configs/lion_rk3368.h
> -F: arch/arm/dts/rk3368-lion.dts
> -F: configs/lion-rk3368_defconfig
> -W: https://www.theobroma-systems.com/rk3368-uq7/tech-specs
> -T: git git://git.theobroma-systems.com/lion-u-boot.git
> diff --git a/board/theobroma-systems/lion_rk3368/README b/board/theobroma-systems/lion_rk3368/README
> deleted file mode 100644
> index 7488b18326b..00000000000
> --- a/board/theobroma-systems/lion_rk3368/README
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -Here is the step-by-step to boot to U-Boot on RK3368-uQ7
> -
> -Get the Source and build ATF
> -============================
> -
> - > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
> - > cd arm-trusted-firmware
> - > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31
> - > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin
> -
> -Configure U-Boot
> -================
> -
> - > cd ../u-boot
> - > make lion-rk3368_defconfig
> -
> -Build the TPL/SPL stage
> -=======================
> -
> - > make CROSS_COMPILE=aarch64-unknown-elf-
> -
> -Build the full U-Boot and a FIT image including the ATF
> -=======================================================
> -
> - > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb
> -
> -Flash the image
> -===============
> -
> -Copy the SPL to offset 32k and the FIT image containing the payloads
> -(U-Boot proper, ATF, devicetree) to offset 256k card.
> -
> -SD-Card
> --------
> -
> - > dd if=idbloader.img of=/dev/sdb seek=64
> - > dd if=u-boot.itb of=/dev/sdb seek=512
> -
> -eMMC
> -----
> -
> -rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with
> -help of the Rockchip loader binary.
> -
> - > git clone https://github.com/rockchip-linux/rkdeveloptool
> - > cd rkdeveloptool
> - > autoreconf -i && && ./configure && make
> - > git clone https://github.com/rockchip-linux/rkbin.git
> - > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin
> - > ./rkdeveloptool wl 64 ../spl.img
> - > ./rkdeveloptool wl 512 ../u-boot.itb
> -
> -
> -If everything went according to plan, you should see the following
> -output on UART0:
> -
> -<debug_uart> U-Boot TPL board init
> -Trying to boot from BOOTROM
> -Returning to boot ROM...
> -Trying to boot from MMC1
> -NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443
> -NOTICE: BL31: Built : 18:04:47, Jul 5 2017
> -
> -
> -U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200)
> -
> -Model: Theobroma Systems RK3368-uQ7 SoM
> -DRAM: 2 GiB
> -MMC: dwmmc at ff0c0000: 1, dwmmc at ff0f0000: 0
> -Using default environment
> -
> -In: serial at ff180000
> -Out: serial at ff180000
> -Err: serial at ff180000
> -Net:
> -Warning: ethernet at ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e
> -eth0: ethernet at ff290000
> -Hit any key to stop autoboot: 2
> diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig
> deleted file mode 100644
> index 868eeaf6c8e..00000000000
> --- a/configs/lion-rk3368_defconfig
> +++ /dev/null
> @@ -1,110 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_SKIP_LOWLEVEL_INIT=y
> -CONFIG_COUNTER_FREQUENCY=24000000
> -CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00200000
> -CONFIG_NR_DRAM_BANKS=1
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
> -CONFIG_ENV_OFFSET=0x3F8000
> -CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou"
> -CONFIG_SPL_TEXT_BASE=0x00000000
> -CONFIG_ROCKCHIP_RK3368=y
> -CONFIG_TPL_LIBCOMMON_SUPPORT=y
> -CONFIG_TPL_LIBGENERIC_SUPPORT=y
> -CONFIG_SPL_DRIVERS_MISC=y
> -CONFIG_SPL_STACK=0x188000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x400000
> -CONFIG_SPL_BSS_MAX_SIZE=0x20000
> -CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL=y
> -CONFIG_DEBUG_UART_BASE=0xFF180000
> -CONFIG_DEBUG_UART_CLOCK=24000000
> -CONFIG_SPL_SPI_FLASH_SUPPORT=y
> -CONFIG_SPL_SPI=y
> -CONFIG_SYS_LOAD_ADDR=0x800800
> -CONFIG_DEBUG_UART=y
> -CONFIG_FIT=y
> -CONFIG_FIT_VERBOSE=y
> -CONFIG_SPL_LOAD_FIT=y
> -CONFIG_BOOTSTAGE=y
> -CONFIG_SPL_BOOTSTAGE=y
> -CONFIG_BOOTSTAGE_REPORT=y
> -CONFIG_BOOTSTAGE_FDT=y
> -CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-lion-haikou.dtb"
> -# CONFIG_DISPLAY_CPUINFO is not set
> -CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_MAX_SIZE=0x40000
> -CONFIG_SPL_PAD_TO=0x7f8000
> -CONFIG_SPL_BOOTROM_SUPPORT=y
> -# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
> -CONFIG_SPL_ATF=y
> -CONFIG_TPL=y
> -CONFIG_TPL_SYS_MALLOC_SIMPLE=y
> -CONFIG_TPL_DRIVERS_MISC=y
> -CONFIG_CMD_GPIO=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SPI=y
> -CONFIG_CMD_USB=y
> -CONFIG_CMD_BOOTSTAGE=y
> -CONFIG_CMD_REGULATOR=y
> -CONFIG_CMD_MTDPARTS=y
> -CONFIG_SPL_OF_CONTROL=y
> -CONFIG_TPL_OF_CONTROL=y
> -CONFIG_OF_LIVE=y
> -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent"
> -CONFIG_TPL_OF_PLATDATA=y
> -CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> -CONFIG_NET_RANDOM_ETHADDR=y
> -CONFIG_TPL_DM=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_TPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_TPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> -CONFIG_TPL_CLK=y
> -CONFIG_ROCKCHIP_GPIO=y
> -CONFIG_SYS_I2C_ROCKCHIP=y
> -CONFIG_MMC_DW=y
> -CONFIG_MMC_DW_ROCKCHIP=y
> -CONFIG_SPI_FLASH_MACRONIX=y
> -CONFIG_SPI_FLASH_WINBOND=y
> -CONFIG_PHY_ANEG_TIMEOUT=8000
> -CONFIG_PHY_MSCC=y
> -CONFIG_DM_ETH_PHY=y
> -CONFIG_ETH_DESIGNWARE=y
> -CONFIG_RGMII=y
> -CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> -CONFIG_PMIC_RK8XX=y
> -CONFIG_DM_REGULATOR_FIXED=y
> -CONFIG_REGULATOR_RK8XX=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> -CONFIG_TPL_RAM=y
> -CONFIG_DEBUG_UART_SHIFT=2
> -CONFIG_DEBUG_UART_ANNOUNCE=y
> -CONFIG_SYS_NS16550_MEM32=y
> -CONFIG_ROCKCHIP_SPI=y
> -CONFIG_SYSINFO=y
> -CONFIG_SYSINFO_SMBIOS=y
> -CONFIG_SYSRESET=y
> -CONFIG_USB=y
> -CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_EHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_DWC2_OTG=y
> -CONFIG_SPL_TINY_MEMSET=y
> -CONFIG_LZO=y
> -CONFIG_ERRNO_STR=y
> diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
> index eaf71673b7f..bac12f055bc 100644
> --- a/doc/board/rockchip/rockchip.rst
> +++ b/doc/board/rockchip/rockchip.rst
> @@ -72,7 +72,6 @@ List of mainline supported Rockchip boards:
> - GeekBox (geekbox)
> - PX5 EVB (evb-px5)
> - Rockchip Sheep (sheep-rk3368)
> - - Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368)
> * rk3399
> - 96boards RK3399 Ficus (ficus-rk3399)
> - 96boards Rock960 (rock960-rk3399)
> diff --git a/include/configs/lion_rk3368.h b/include/configs/lion_rk3368.h
> deleted file mode 100644
> index 0d29e1ddc73..00000000000
> --- a/include/configs/lion_rk3368.h
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
> - */
> -
> -#ifndef __CONFIGS_LION_RK3368_H
> -#define __CONFIGS_LION_RK3368_H
> -
> -#include <configs/rk3368_common.h>
> -
> -#define KERNEL_LOAD_ADDR 0x280000
> -#define DTB_LOAD_ADDR 0x5600000
> -#define INITRD_LOAD_ADDR 0x5bf0000
> -/* PHY needs longer aneg time at 1G */
> -
> -#endif
>
More information about the U-Boot
mailing list