[PATCH v4 16/21] power: regulator: qcom-rpmh-regulator: port over lineage_range helpers

Caleb Connolly caleb.connolly at linaro.org
Tue Jul 9 11:34:44 CEST 2024


Import struct linear_range() and builder macro from Linux regulator
core.

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 drivers/power/regulator/qcom-rpmh-regulator.c | 37 +++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/power/regulator/qcom-rpmh-regulator.c b/drivers/power/regulator/qcom-rpmh-regulator.c
index 5f522de44734..d0acee9f558e 100644
--- a/drivers/power/regulator/qcom-rpmh-regulator.c
+++ b/drivers/power/regulator/qcom-rpmh-regulator.c
@@ -28,8 +28,15 @@ enum rpmh_regulator_type {
 	VRM,
 	XOB,
 };
 
+enum rpmh_regulator_mode {
+	REGULATOR_MODE_RETENTION,
+	REGULATOR_MODE_LPM,
+	REGULATOR_MODE_AUTO,
+	REGULATOR_MODE_HPM,
+};
+
 #define RPMH_REGULATOR_REG_VRM_VOLTAGE		0x0
 #define RPMH_REGULATOR_REG_ENABLE		0x4
 #define RPMH_REGULATOR_REG_VRM_MODE		0x8
 
@@ -60,8 +67,38 @@ enum rpmh_regulator_type {
 #define PMIC5_BOB_MODE_PFM			4
 #define PMIC5_BOB_MODE_AUTO			6
 #define PMIC5_BOB_MODE_PWM			7
 
+
+/**
+ * struct linear_range - table of selector - value pairs
+ *
+ * Define a lookup-table for range of values. Intended to help when looking
+ * for a register value matching certaing physical measure (like voltage).
+ * Usable when increment of one in register always results a constant increment
+ * of the physical measure (like voltage).
+ *
+ * @min:  Lowest value in range
+ * @min_sel: Lowest selector for range
+ * @max_sel: Highest selector for range
+ * @step: Value step size
+ */
+struct linear_range {
+	unsigned int min;
+	unsigned int min_sel;
+	unsigned int max_sel;
+	unsigned int step;
+};
+
+/* Initialize struct linear_range for regulators */
+#define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV)	\
+{									\
+	.min		= _min_uV,					\
+	.min_sel	= _min_sel,					\
+	.max_sel	= _max_sel,					\
+	.step		= _step_uV,					\
+}
+
 /**
  * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
  * @regulator_type:		RPMh accelerator type used to manage this
  *				regulator

-- 
2.45.2



More information about the U-Boot mailing list