[PATCH v3 26/38] mmc: exynos_dw_mmc: Read common bus-width property

[Sam Protsenko]

Instead of using non-standard "samsung,bus-width" dts property, read
common "bus-width" property used in upstream Linux kernel. It's safe to
do so, as "bus-width" property was already added to corresponding nodes
in all affected Exynos device tree files.

No functional change.

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
---
Changes in v3:
  - (none)

Changes in v2:
  - (none)

 drivers/mmc/exynos_dw_mmc.c | 2 +-
 drivers/mmc/s5p_sdhci.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index b5c8f592c7e8..612c2d0c615d 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -274,7 +274,7 @@ static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 #endif
 
 	/* Get the bus width from the device node (Default is 4bit buswidth) */
-	host->buswidth = dev_read_u32_default(dev, "samsung,bus-width", 4);
+	host->buswidth = dev_read_u32_default(dev, "bus-width", 4);
 
 	/* Set the base address from the device node */
 	host->ioaddr = dev_read_addr_ptr(dev);
diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
index 80dbb38c9b36..278019f02abb 100644
--- a/drivers/mmc/s5p_sdhci.c
+++ b/drivers/mmc/s5p_sdhci.c
@@ -166,7 +166,7 @@ static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
 	host->index = dev_id - PERIPH_ID_SDMMC0;
 
 	/* Get bus width */
-	bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+	bus_width = fdtdec_get_int(blob, node, "bus-width", 0);
 	if (bus_width <= 0) {
 		debug("MMC: Can't get bus-width\n");
 		return -EINVAL;
-- 
2.39.2