[PATCH 1/2] riscv: spacemit: bananapi_f3: initial support added
Heinrich Schuchardt
xypron.glpk at gmx.de
Sun Jul 14 17:48:53 CEST 2024
On 7/14/24 17:08, Kongyang Liu wrote:
> Add basic support for SpacemiT's Banana Pi F3 board
>
> Signed-off-by: Kongyang Liu <seashell11234455 at gmail.com>
>
> ---
>
> arch/riscv/Kconfig | 5 +
> arch/riscv/cpu/k1/Kconfig | 18 ++
> arch/riscv/cpu/k1/Makefile | 6 +
> arch/riscv/cpu/k1/cpu.c | 9 +
> arch/riscv/cpu/k1/dram.c | 39 +++
> arch/riscv/dts/Makefile | 1 +
> arch/riscv/dts/k1-bananapi-f3.dts | 20 ++
> arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++
> board/spacemit/bananapi_f3/Kconfig | 25 ++
> board/spacemit/bananapi_f3/MAINTAINERS | 6 +
> board/spacemit/bananapi_f3/Makefile | 5 +
> board/spacemit/bananapi_f3/board.c | 9 +
> configs/bananapi_f3_defconfig | 20 ++
> include/configs/bananapi_f3.h | 15 +
> 14 files changed, 553 insertions(+)
> create mode 100644 arch/riscv/cpu/k1/Kconfig
> create mode 100644 arch/riscv/cpu/k1/Makefile
> create mode 100644 arch/riscv/cpu/k1/cpu.c
> create mode 100644 arch/riscv/cpu/k1/dram.c
> create mode 100644 arch/riscv/dts/k1-bananapi-f3.dts
> create mode 100644 arch/riscv/dts/k1.dtsi
> create mode 100644 board/spacemit/bananapi_f3/Kconfig
> create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS
> create mode 100644 board/spacemit/bananapi_f3/Makefile
> create mode 100644 board/spacemit/bananapi_f3/board.c
> create mode 100644 configs/bananapi_f3_defconfig
> create mode 100644 include/configs/bananapi_f3.h
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index fa3b016c52..211f19a585 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -11,6 +11,9 @@ choice
> config TARGET_ANDES_AE350
> bool "Support Andes ae350"
>
> +config TARGET_BANANAPI_F3
> + bool "Support BananaPi F3 Board"
> +
> config TARGET_MICROCHIP_ICICLE
> bool "Support Microchip PolarFire-SoC Icicle Board"
>
> @@ -88,6 +91,7 @@ source "board/sifive/unleashed/Kconfig"
> source "board/sifive/unmatched/Kconfig"
> source "board/sipeed/maix/Kconfig"
> source "board/sophgo/milkv_duo/Kconfig"
> +source "board/spacemit/bananapi_f3/Kconfig"
> source "board/starfive/visionfive2/Kconfig"
> source "board/thead/th1520_lpi4a/Kconfig"
> source "board/xilinx/mbv/Kconfig"
> @@ -99,6 +103,7 @@ source "arch/riscv/cpu/fu540/Kconfig"
> source "arch/riscv/cpu/fu740/Kconfig"
> source "arch/riscv/cpu/generic/Kconfig"
> source "arch/riscv/cpu/jh7110/Kconfig"
> +source "arch/riscv/cpu/k1/Kconfig"
>
> # architecture-specific options below
>
> diff --git a/arch/riscv/cpu/k1/Kconfig b/arch/riscv/cpu/k1/Kconfig
> new file mode 100644
> index 0000000000..79c9fefb66
> --- /dev/null
> +++ b/arch/riscv/cpu/k1/Kconfig
> @@ -0,0 +1,18 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2024, Kongyang Liu <seashell11234455 at gmail.com>
> +
> +config SPACEMIT_K1
> + bool
> + select BINMAN
> + select ARCH_EARLY_INIT_R
> + select SYS_CACHE_SHIFT_6
> + imply CPU
> + imply CPU_RISCV
> + imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE)
> + imply RISCV_ACLINT if RISCV_MMODE
> + imply SPL_RISCV_ACLINT if SPL_RISCV_MMODE
> + imply CMD_CPU
> + imply SPL_CPU
> + imply SPL_OPENSBI
> + imply SPL_LOAD_FIT
> diff --git a/arch/riscv/cpu/k1/Makefile b/arch/riscv/cpu/k1/Makefile
> new file mode 100644
> index 0000000000..da12e0f64e
> --- /dev/null
> +++ b/arch/riscv/cpu/k1/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (c) 2024, Kongyang Liu <seashell11234455 at gmail.com>
> +
> +obj-y += dram.o
> +obj-y += cpu.o
> diff --git a/arch/riscv/cpu/k1/cpu.c b/arch/riscv/cpu/k1/cpu.c
> new file mode 100644
> index 0000000000..233a6a3d64
> --- /dev/null
> +++ b/arch/riscv/cpu/k1/cpu.c
> @@ -0,0 +1,9 @@
> +// SPDX-License-Identifier: GPL-2.0+
Thanks a lot for adding the board.
GPL-2.0-or-later, see https://spdx.org/licenses/GPL-2.0-or-later.html
> +/*
> + * Copyright (c) 2024, Kongyang Liu <seashell11234455 at gmail.com>
> + */
> +
> +int cleanup_before_linux(void)
> +{
> + return 0;
> +}
> diff --git a/arch/riscv/cpu/k1/dram.c b/arch/riscv/cpu/k1/dram.c
> new file mode 100644
> index 0000000000..41a596eef4
> --- /dev/null
> +++ b/arch/riscv/cpu/k1/dram.c
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: GPL-2.0+
ditto
> +/*
> + * Copyright (c) 2024, Kongyang Liu <seashell11234455 at gmail.com>
> + */
> +
> +#include <asm/global_data.h>
> +#include <config.h>
> +#include <linux/sizes.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> + gd->ram_base = CFG_SYS_SDRAM_BASE;
> + /* TODO get ram size from ddr controller */
> + gd->ram_size = SZ_4G;
> + return 0;
> +}
> +
> +int dram_init_banksize(void)
> +{
> + gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
> + gd->bd->bi_dram[0].size = min_t(phys_size_t, gd->ram_size, SZ_2G);
> +
> + if (gd->ram_size > SZ_2G && CONFIG_NR_DRAM_BANKS > 1) {
> + gd->bd->bi_dram[1].start = 0x100000000;
> + gd->bd->bi_dram[1].size = gd->ram_size - SZ_2G;
> + }
> +
> + return 0;
> +}
> +
> +phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
> +{
> + if (gd->ram_size > SZ_2G)
> + return SZ_2G;
> +
> + return gd->ram_size;
> +}
> diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
> index 17cda483e1..71267f96f8 100644
> --- a/arch/riscv/dts/Makefile
> +++ b/arch/riscv/dts/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0+
>
> dtb-$(CONFIG_TARGET_ANDES_AE350) += ae350_32.dtb ae350_64.dtb
> +dtb-$(CONFIG_TARGET_BANANAPI_F3) += k1-bananapi-f3.dtb
> dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += mpfs-icicle-kit.dtb
> dtb-$(CONFIG_TARGET_MILKV_DUO) += cv1800b-milkv-duo.dtb
> dtb-$(CONFIG_TARGET_QEMU_VIRT) += qemu-virt32.dtb qemu-virt64.dtb
> diff --git a/arch/riscv/dts/k1-bananapi-f3.dts b/arch/riscv/dts/k1-bananapi-f3.dts
> new file mode 100644
> index 0000000000..542049d9d3
> --- /dev/null
> +++ b/arch/riscv/dts/k1-bananapi-f3.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2024 Yangyu Chen <cyy at cyyself.name>
> + */
> +
> +#include "k1.dtsi"
> +#include "binman.dtsi"
> +
> +/ {
> + model = "Banana Pi BPI-F3";
> + compatible = "bananapi,bpi-f3", "spacemit,k1";
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/riscv/dts/k1.dtsi b/arch/riscv/dts/k1.dtsi
> new file mode 100644
> index 0000000000..b301f45fd5
> --- /dev/null
> +++ b/arch/riscv/dts/k1.dtsi
> @@ -0,0 +1,375 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
Elsewhere you use GPL-2.0-or-later. Any special reason to be more
restrictive here?
> +/*
> + * Copyright (C) 2024 Yangyu Chen <cyy at cyyself.name>
> + */
> +
> +/dts-v1/;
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "SpacemiT K1";
> + compatible = "spacemit,k1";
According to the devicetree specification "a memory device node is
required for all devicetrees".
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + serial3 = &uart4;
> + serial4 = &uart5;
> + serial5 = &uart6;
> + serial6 = &uart7;
> + serial7 = &uart8;
> + serial8 = &uart9;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + timebase-frequency = <24000000>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu_0>;
> + };
> + core1 {
> + cpu = <&cpu_1>;
> + };
> + core2 {
> + cpu = <&cpu_2>;
> + };
> + core3 {
> + cpu = <&cpu_3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu_4>;
> + };
> + core1 {
> + cpu = <&cpu_5>;
> + };
> + core2 {
> + cpu = <&cpu_6>;
> + };
> + core3 {
> + cpu = <&cpu_7>;
> + };
> + };
> + };
> +
> + cpu_0: cpu at 0 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <0>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_1: cpu at 1 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <1>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_2: cpu at 2 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <2>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_3: cpu at 3 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <3>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_4: cpu at 4 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <4>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_5: cpu at 5 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <5>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu5_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_6: cpu at 6 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <6>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu6_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_7: cpu at 7 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <7>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu7_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + dma-noncoherent;
> + ranges;
> +
> + uart0: serial at d4017000 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017000 0x0 0x100>;
> + interrupts = <42>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart2: serial at d4017100 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017100 0x0 0x100>;
> + interrupts = <44>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart3: serial at d4017200 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017200 0x0 0x100>;
> + interrupts = <45>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart4: serial at d4017300 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017300 0x0 0x100>;
> + interrupts = <46>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart5: serial at d4017400 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017400 0x0 0x100>;
> + interrupts = <47>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart6: serial at d4017500 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017500 0x0 0x100>;
> + interrupts = <48>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart7: serial at d4017600 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017600 0x0 0x100>;
> + interrupts = <49>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart8: serial at d4017700 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017700 0x0 0x100>;
> + interrupts = <50>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart9: serial at d4017800 {
> + compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xd4017800 0x0 0x100>;
> + interrupts = <51>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + plic: interrupt-controller at e0000000 {
> + compatible = "spacemit,k1-plic", "sifive,plic-1.0.0";
> + reg = <0x0 0xe0000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>,
> + <&cpu5_intc 11>, <&cpu5_intc 9>,
> + <&cpu6_intc 11>, <&cpu6_intc 9>,
> + <&cpu7_intc 11>, <&cpu7_intc 9>;
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + riscv,ndev = <159>;
> + };
> +
> + clint: timer at e4000000 {
> + compatible = "spacemit,k1-clint", "sifive,clint0";
> + reg = <0x0 0xe4000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>,
> + <&cpu5_intc 3>, <&cpu5_intc 7>,
> + <&cpu6_intc 3>, <&cpu6_intc 7>,
> + <&cpu7_intc 3>, <&cpu7_intc 7>;
> + };
> + };
> +};
> diff --git a/board/spacemit/bananapi_f3/Kconfig b/board/spacemit/bananapi_f3/Kconfig
> new file mode 100644
> index 0000000000..0082a0d2af
> --- /dev/null
> +++ b/board/spacemit/bananapi_f3/Kconfig
> @@ -0,0 +1,25 @@
> +if TARGET_BANANAPI_F3
> +
> +config SYS_BOARD
> + default "bananapi_f3"
> +
> +config SYS_VENDOR
> + default "spacemit"
> +
> +config SYS_CPU
> + default "k1"
> +
> +config SYS_CONFIG_NAME
> + default "bananapi_f3"
> +
> +config TEXT_BASE
> + default 0x00200000
> +
> +config SPL_OPENSBI_LOAD_ADDR
> + default 0x00000000
> +
> +config BOARD_SPECIFIC_OPTIONS
> + def_bool y
> + select SPACEMIT_K1
> +
> +endif
> diff --git a/board/spacemit/bananapi_f3/MAINTAINERS b/board/spacemit/bananapi_f3/MAINTAINERS
> new file mode 100644
> index 0000000000..fc0f8487e6
> --- /dev/null
> +++ b/board/spacemit/bananapi_f3/MAINTAINERS
> @@ -0,0 +1,6 @@
> +BananaPi F3
> +M: Kongyang Liu <seashell11234455 at gmail.com>
> +S: Maintained
> +F: board/spacemit/bananapi_f3/
> +F: configs/bananapi_f3_defconfig
> +F: doc/board/spacemit/bananapi_f3.rst
> diff --git a/board/spacemit/bananapi_f3/Makefile b/board/spacemit/bananapi_f3/Makefile
> new file mode 100644
> index 0000000000..a087013f5c
> --- /dev/null
> +++ b/board/spacemit/bananapi_f3/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0+
GPL-2.0-or-later
See https://spdx.org/licenses/GPL-2.0-or-later.html
> +#
> +# Copyright (c) 2024, Kongyang Liu <seashell11234455 at gmail.com>
> +
> +obj-y := board.o
> diff --git a/board/spacemit/bananapi_f3/board.c b/board/spacemit/bananapi_f3/board.c
> new file mode 100644
> index 0000000000..eaa47be173
> --- /dev/null
> +++ b/board/spacemit/bananapi_f3/board.c
> @@ -0,0 +1,9 @@
> +// SPDX-License-Identifier: GPL-2.0+
ditto
> +/*
> + * Copyright (c) 2024, Kongyang Liu <seashell11234455 at gmail.com>
> + */
> +
> +int board_init(void)
> +{
> + return 0;
> +}
> diff --git a/configs/bananapi_f3_defconfig b/configs/bananapi_f3_defconfig
> new file mode 100644
> index 0000000000..ce197d60bd
> --- /dev/null
> +++ b/configs/bananapi_f3_defconfig
> @@ -0,0 +1,20 @@
> +CONFIG_RISCV=y
> +CONFIG_SYS_MALLOC_LEN=0x1000000
> +CONFIG_NR_DRAM_BANKS=2
> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000
> +CONFIG_DEFAULT_DEVICE_TREE="k1-bananapi-f3"
The vendor SPL probably passes a device-tree to OpenSBI.
The BananaPi BPI-F3 is sold with different RAM sizes. SPL might already
have determined the size and added the information to the device-tree.
Could we use that device-tree with CONFIG_OF_BOARD?
We also need the memory reservation added by OpenSBI.
> +CONFIG_SYS_LOAD_ADDR=0x200000
> +CONFIG_TARGET_BANANAPI_F3=y
> +CONFIG_ARCH_RV64I=y
> +CONFIG_RISCV_SMODE=y
> +CONFIG_FIT=y
> +CONFIG_SYS_BOOTM_LEN=0xa000000
> +CONFIG_SUPPORT_RAW_INITRD=y
> +CONFIG_SYS_CBSIZE=256
> +CONFIG_SYS_PBSIZE=276
> +CONFIG_HUSH_PARSER=y
> +CONFIG_SYS_PROMPT="bananapi_f3# "
Can we use the default prompt, please. This will make it easier to
support nearly identical boards in future.
Best regards
Heinrich
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_SYS_NS16550_MEM32=y
> diff --git a/include/configs/bananapi_f3.h b/include/configs/bananapi_f3.h
> new file mode 100644
> index 0000000000..872c2014a4
> --- /dev/null
> +++ b/include/configs/bananapi_f3.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (c) 2024, Kongyang Liu <seashell11234455 at gmail.com>
> + *
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <linux/serial_reg.h>
> +
> +#define CFG_SYS_SDRAM_BASE 0x0
> +#define CFG_SYS_NS16550_IER UART_IER_UUE
> +
> +#endif /* __CONFIG_H */
More information about the U-Boot
mailing list