[PATCH v4 08/10] mtd: spinand: more refactoring

[Mikhail Kshevetskiy]

changes:
 * Move spinand_check_ecc_status(), spinand_noecc_ooblayout_ecc(),
   spinand_noecc_ooblayout_free() and spinand_noecc_ooblayout close
   to each other.
 * some code formatting
 * remove comments not present in linux driver

This make code more close to linux-6.10 kernel driver

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>
---
 drivers/mtd/nand/spi/core.c | 115 +++++++++++++++++-------------------
 1 file changed, 55 insertions(+), 60 deletions(-)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index cb787908332..00adc08976e 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -217,6 +217,59 @@ static int spinand_ecc_enable(struct spinand_device *spinand,
 			       enable ? CFG_ECC_ENABLE : 0);
 }
 
+static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
+{
+	struct nand_device *nand = spinand_to_nand(spinand);
+
+	if (spinand->eccinfo.get_status)
+		return spinand->eccinfo.get_status(spinand, status);
+
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case STATUS_ECC_HAS_BITFLIPS:
+		/*
+		 * We have no way to know exactly how many bitflips have been
+		 * fixed, so let's return the maximum possible value so that
+		 * wear-leveling layers move the data immediately.
+		 */
+		return nand->eccreq.strength;
+
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int spinand_noecc_ooblayout_ecc(struct mtd_info *mtd, int section,
+				       struct mtd_oob_region *region)
+{
+	return -ERANGE;
+}
+
+static int spinand_noecc_ooblayout_free(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	/* Reserve 2 bytes for the BBM. */
+	region->offset = 2;
+	region->length = 62;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops spinand_noecc_ooblayout = {
+	.ecc = spinand_noecc_ooblayout_ecc,
+	.rfree = spinand_noecc_ooblayout_free,
+};
+
 static int spinand_write_enable_op(struct spinand_device *spinand)
 {
 	struct spi_mem_op op = SPINAND_WR_EN_DIS_OP(true);
@@ -408,9 +461,8 @@ out:
 static int spinand_read_id_op(struct spinand_device *spinand, u8 naddr,
 			      u8 ndummy, u8 *buf)
 {
-	struct spi_mem_op op = SPINAND_READID_OP(naddr, ndummy,
-						 spinand->scratchbuf,
-						 SPINAND_MAX_ID_LEN);
+	struct spi_mem_op op = SPINAND_READID_OP(
+		naddr, ndummy, spinand->scratchbuf, SPINAND_MAX_ID_LEN);
 	int ret;
 
 	ret = spi_mem_exec_op(spinand->slave, &op);
@@ -440,35 +492,6 @@ static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
 	return spinand_write_reg_op(spinand, REG_BLOCK_LOCK, lock);
 }
 
-static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
-{
-	struct nand_device *nand = spinand_to_nand(spinand);
-
-	if (spinand->eccinfo.get_status)
-		return spinand->eccinfo.get_status(spinand, status);
-
-	switch (status & STATUS_ECC_MASK) {
-	case STATUS_ECC_NO_BITFLIPS:
-		return 0;
-
-	case STATUS_ECC_HAS_BITFLIPS:
-		/*
-		 * We have no way to know exactly how many bitflips have been
-		 * fixed, so let's return the maximum possible value so that
-		 * wear-leveling layers move the data immediately.
-		 */
-		return nand->eccreq.strength;
-
-	case STATUS_ECC_UNCOR_ERROR:
-		return -EBADMSG;
-
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
 static int spinand_read_page(struct spinand_device *spinand,
 			     const struct nand_page_io_req *req,
 			     bool ecc_enabled)
@@ -1051,30 +1074,6 @@ static int spinand_detect(struct spinand_device *spinand)
 	return 0;
 }
 
-static int spinand_noecc_ooblayout_ecc(struct mtd_info *mtd, int section,
-				       struct mtd_oob_region *region)
-{
-	return -ERANGE;
-}
-
-static int spinand_noecc_ooblayout_free(struct mtd_info *mtd, int section,
-					struct mtd_oob_region *region)
-{
-	if (section)
-		return -ERANGE;
-
-	/* Reserve 2 bytes for the BBM. */
-	region->offset = 2;
-	region->length = 62;
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops spinand_noecc_ooblayout = {
-	.ecc = spinand_noecc_ooblayout_ecc,
-	.rfree = spinand_noecc_ooblayout_free,
-};
-
 static int spinand_init_flash(struct spinand_device *spinand)
 {
 	struct udevice *dev = spinand->slave->dev;
@@ -1164,10 +1163,6 @@ static int spinand_init(struct spinand_device *spinand)
 	if (ret)
 		goto err_manuf_cleanup;
 
-	/*
-	 * Right now, we don't support ECC, so let the whole oob
-	 * area is available for user.
-	 */
 	mtd->_read_oob = spinand_mtd_read;
 	mtd->_write_oob = spinand_mtd_write;
 	mtd->_block_isbad = spinand_mtd_block_isbad;
-- 
2.39.2