[PATCH v2] msc_sm2s_imx8mp: Adjust the initrd_addr location

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Booting an initramfs with the current initrd_addr address may lead to
initramfs corruption and boot failure.

Fix the initramfs problem by applying the following layout
suggested by Tom Rini:

loadaddr=0x40480000 --> Gets moved to 0x40600000 in run-time:

   Uncompressing Kernel Image
Moving Image from 0x40480000 to 0x40600000, end=41e80000

fdt_addr_r= moved loadaddr + 128 MiB = 0x48600000

initrd_addr=fdt_addr_r + 512 KiB = 0x48680000

Signed-off-by: Fabio Estevam <festevam at denx.de>
Tested-by: Stefano Babic <sbabic at denx.de>
---
Changes since v2:
- Apply Tom's suggested layout.
- Added Stefano's Tested-by.

 include/configs/msc_sm2s_imx8mp.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h
index 3c7d96cb3c0..d0c5da7b98d 100644
--- a/include/configs/msc_sm2s_imx8mp.h
+++ b/include/configs/msc_sm2s_imx8mp.h
@@ -36,10 +36,10 @@
 	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"image=Image\0" \
 	"console=ttymxc1,115200\0" \
-	"fdt_addr_r=0x43000000\0"			\
+	"fdt_addr_r=0x48600000\0"			\
 	"boot_fdt=try\0" \
 	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"initrd_addr=0x43800000\0"		\
+	"initrd_addr=0x48680000\0"		\
 	"bootm_size=0x10000000\0" \
 	"mmcpart=1\0" \
 	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
-- 
2.34.1