[PATCH] cmd: move CMD_DHCP6 options beneath CMD_DHCP6

[Heinrich Schuchardt]

All Kconfig options that depend on CONFIG_CMD_DHCP6 should immediately
follow it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
---
 cmd/Kconfig | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 0cf0d8ad8ab..323e473cd64 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1810,6 +1810,23 @@ config CMD_DHCP6
 	  Will perform 4-message exchange with DHCPv6 server, requesting
 	  the minimum required options to TFTP boot. Complies with RFC 8415.
 
+if CMD_DHCP6
+
+config DHCP6_PXE_CLIENTARCH
+	hex
+	default 0x16 if ARM64
+	default 0x15 if ARM
+	default 0xFF
+
+config DHCP6_PXE_DHCP_OPTION
+	bool "Request & store 'pxe_configfile' from DHCP6 server"
+
+config DHCP6_ENTERPRISE_ID
+	int "Enterprise ID to send in DHCPv6 Vendor Class Option"
+	default 0
+
+endif
+
 config BOOTP_MAY_FAIL
 	bool "Allow for the BOOTP/DHCP server to not be found"
 	depends on CMD_BOOTP
@@ -1927,23 +1944,6 @@ config BOOTP_VCI_STRING
 	default "U-Boot.arm" if ARM
 	default "U-Boot"
 
-if CMD_DHCP6
-
-config DHCP6_PXE_CLIENTARCH
-	hex
-	default 0x16 if ARM64
-	default 0x15 if ARM
-	default 0xFF
-
-config DHCP6_PXE_DHCP_OPTION
-	bool "Request & store 'pxe_configfile' from DHCP6 server"
-
-config DHCP6_ENTERPRISE_ID
-	int "Enterprise ID to send in DHCPv6 Vendor Class Option"
-	default 0
-
-endif
-
 config CMD_TFTPBOOT
 	bool "tftpboot"
 	default y
-- 
2.45.2