[PATCH 3/5] arm: ti: Remove omap4 platform support
Tom Rini
trini at konsulko.com
Mon Jul 15 21:35:53 CEST 2024
There are no longer any OMAP4 platforms in U-Boot, remove the related
functionality.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/include/asm/arch-omap4/clock.h | 250 ----------
arch/arm/include/asm/arch-omap4/cpu.h | 109 -----
arch/arm/include/asm/arch-omap4/ehci.h | 38 --
arch/arm/include/asm/arch-omap4/gpio.h | 34 --
arch/arm/include/asm/arch-omap4/hardware.h | 25 -
arch/arm/include/asm/arch-omap4/i2c.h | 11 -
arch/arm/include/asm/arch-omap4/mem.h | 61 ---
.../arm/include/asm/arch-omap4/mmc_host_def.h | 38 --
arch/arm/include/asm/arch-omap4/mux_omap4.h | 328 -------------
arch/arm/include/asm/arch-omap4/omap.h | 143 ------
arch/arm/include/asm/arch-omap4/spl.h | 22 -
arch/arm/include/asm/arch-omap4/sys_proto.h | 71 ---
arch/arm/include/asm/omap_common.h | 16 +-
arch/arm/mach-omap2/Kconfig | 27 +-
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/emif-common.c | 4 -
arch/arm/mach-omap2/omap4/Kconfig | 7 -
arch/arm/mach-omap2/omap4/Makefile | 11 -
arch/arm/mach-omap2/omap4/boot.c | 103 ----
arch/arm/mach-omap2/omap4/emif.c | 109 -----
arch/arm/mach-omap2/omap4/hw_data.c | 460 ------------------
arch/arm/mach-omap2/omap4/hwinit.c | 186 -------
arch/arm/mach-omap2/omap4/prcm-regs.c | 306 ------------
arch/arm/mach-omap2/omap4/sdram_elpida.c | 323 ------------
common/spl/Kconfig | 4 +-
drivers/i2c/Kconfig | 2 +-
drivers/mmc/Kconfig | 2 +-
drivers/mmc/omap_hsmmc.c | 13 +-
drivers/power/Kconfig | 4 -
drivers/power/Makefile | 1 -
drivers/power/twl6030.c | 311 ------------
drivers/serial/ns16550.c | 3 +-
drivers/usb/musb-new/linux-compat.h | 4 -
drivers/usb/musb-new/musb_core.c | 2 +-
drivers/usb/musb-new/musb_core.h | 2 +-
drivers/usb/musb-new/omap2430.c | 12 -
drivers/usb/musb/omap3.c | 15 -
include/twl6030.h | 224 ---------
38 files changed, 22 insertions(+), 3262 deletions(-)
delete mode 100644 arch/arm/include/asm/arch-omap4/clock.h
delete mode 100644 arch/arm/include/asm/arch-omap4/cpu.h
delete mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
delete mode 100644 arch/arm/include/asm/arch-omap4/gpio.h
delete mode 100644 arch/arm/include/asm/arch-omap4/hardware.h
delete mode 100644 arch/arm/include/asm/arch-omap4/i2c.h
delete mode 100644 arch/arm/include/asm/arch-omap4/mem.h
delete mode 100644 arch/arm/include/asm/arch-omap4/mmc_host_def.h
delete mode 100644 arch/arm/include/asm/arch-omap4/mux_omap4.h
delete mode 100644 arch/arm/include/asm/arch-omap4/omap.h
delete mode 100644 arch/arm/include/asm/arch-omap4/spl.h
delete mode 100644 arch/arm/include/asm/arch-omap4/sys_proto.h
delete mode 100644 arch/arm/mach-omap2/omap4/Kconfig
delete mode 100644 arch/arm/mach-omap2/omap4/Makefile
delete mode 100644 arch/arm/mach-omap2/omap4/boot.c
delete mode 100644 arch/arm/mach-omap2/omap4/emif.c
delete mode 100644 arch/arm/mach-omap2/omap4/hw_data.c
delete mode 100644 arch/arm/mach-omap2/omap4/hwinit.c
delete mode 100644 arch/arm/mach-omap2/omap4/prcm-regs.c
delete mode 100644 arch/arm/mach-omap2/omap4/sdram_elpida.c
delete mode 100644 drivers/power/twl6030.c
delete mode 100644 include/twl6030.h
diff --git a/arch/arm/include/asm/arch-omap4/clock.h b/arch/arm/include/asm/arch-omap4/clock.h
deleted file mode 100644
index 4054dd8edcbc..000000000000
--- a/arch/arm/include/asm/arch-omap4/clock.h
+++ /dev/null
@@ -1,250 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh at ti.com>
- */
-#ifndef _CLOCKS_OMAP4_H_
-#define _CLOCKS_OMAP4_H_
-
-/*
- * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
- * loop, allow for a minimum of 2 ms wait (in reality the wait will be
- * much more than that)
- */
-#define LDELAY 1000000
-
-/* CM_DLL_CTRL */
-#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
-#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
-#define CM_DLL_CTRL_NO_OVERRIDE 0
-
-/* CM_CLKMODE_DPLL */
-#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11
-#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11)
-#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10
-#define CM_CLKMODE_DPLL_LPMODE_EN_MASK (1 << 10)
-#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT 9
-#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK (1 << 9)
-#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT 8
-#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
-#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5
-#define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5)
-#define CM_CLKMODE_DPLL_EN_SHIFT 0
-#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0)
-
-#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0
-#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7
-
-#define DPLL_EN_STOP 1
-#define DPLL_EN_MN_BYPASS 4
-#define DPLL_EN_LOW_POWER_BYPASS 5
-#define DPLL_EN_FAST_RELOCK_BYPASS 6
-#define DPLL_EN_LOCK 7
-
-/* CM_IDLEST_DPLL fields */
-#define ST_DPLL_CLK_MASK 1
-
-/* CM_CLKSEL_DPLL */
-#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT 24
-#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK (0xFF << 24)
-#define CM_CLKSEL_DPLL_M_SHIFT 8
-#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8)
-#define CM_CLKSEL_DPLL_N_SHIFT 0
-#define CM_CLKSEL_DPLL_N_MASK 0x7F
-#define CM_CLKSEL_DCC_EN_SHIFT 22
-#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
-
-/* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
-
-/* CM_CLKSEL_CORE */
-#define CLKSEL_CORE_SHIFT 0
-#define CLKSEL_L3_SHIFT 4
-#define CLKSEL_L4_SHIFT 8
-
-#define CLKSEL_CORE_X2_DIV_1 0
-#define CLKSEL_L3_CORE_DIV_2 1
-#define CLKSEL_L4_L3_DIV_2 1
-
-/* CM_ABE_PLL_REF_CLKSEL */
-#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT 0
-#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK 1
-#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0
-#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1
-
-/* CM_BYPCLK_DPLL_IVA */
-#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0
-#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3
-
-#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2 1
-
-/* CM_SHADOW_FREQ_CONFIG1 */
-#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1
-#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4
-#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8
-
-#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8
-#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8)
-
-#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11
-#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11)
-
-/*CM_<clock_domain>__CLKCTRL */
-#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0
-#define CD_CLKCTRL_CLKTRCTRL_MASK 3
-
-#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0
-#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1
-#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2
-#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3
-
-
-/* CM_<clock_domain>_<module>_CLKCTRL */
-#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0
-#define MODULE_CLKCTRL_MODULEMODE_MASK 3
-#define MODULE_CLKCTRL_IDLEST_SHIFT 16
-#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16)
-
-#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0
-#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1
-#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2
-
-#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0
-#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1
-#define MODULE_CLKCTRL_IDLEST_IDLE 2
-#define MODULE_CLKCTRL_IDLEST_DISABLED 3
-
-/* CM_L4PER_GPIO4_CLKCTRL */
-#define GPIO4_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
-
-/* CM_L3INIT_HSMMCn_CLKCTRL */
-#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24)
-
-/* CM_WKUP_GPTIMER1_CLKCTRL */
-#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24)
-
-/* CM_CAM_ISS_CLKCTRL */
-#define ISS_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
-
-/* CM_DSS_DSS_CLKCTRL */
-#define DSS_CLKCTRL_OPTFCLKEN_MASK 0xF00
-
-/* CM_COREAON_USB_PHY_CORE_CLKCTRL */
-#define USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K (1 << 8)
-
-/* CM_L3INIT_USBPHY_CLKCTRL */
-#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK (1 << 8)
-
-/* CM_MPU_MPU_CLKCTRL */
-#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
-#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
-#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25
-#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
-
-/* Clock frequencies */
-#define OMAP_SYS_CLK_IND_38_4_MHZ 6
-
-/* PRM_VC_VAL_BYPASS */
-#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
-
-/* PMIC */
-#define SMPS_I2C_SLAVE_ADDR 0x12
-/* TWL6030 SMPS */
-#define SMPS_REG_ADDR_VCORE1 0x55
-#define SMPS_REG_ADDR_VCORE2 0x5B
-#define SMPS_REG_ADDR_VCORE3 0x61
-/* TWL6032 SMPS */
-#define SMPS_REG_ADDR_SMPS1 0x55
-#define SMPS_REG_ADDR_SMPS2 0x5B
-#define SMPS_REG_ADDR_SMPS5 0x49
-
-#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700
-#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000
-
-/* TPS */
-#define TPS62361_I2C_SLAVE_ADDR 0x60
-#define TPS62361_REG_ADDR_SET0 0x0
-#define TPS62361_REG_ADDR_SET1 0x1
-#define TPS62361_REG_ADDR_SET2 0x2
-#define TPS62361_REG_ADDR_SET3 0x3
-#define TPS62361_REG_ADDR_CTRL 0x4
-#define TPS62361_REG_ADDR_TEMP 0x5
-#define TPS62361_REG_ADDR_RMP_CTRL 0x6
-#define TPS62361_REG_ADDR_CHIP_ID 0x8
-#define TPS62361_REG_ADDR_CHIP_ID_2 0x9
-
-#define TPS62361_BASE_VOLT_MV 500
-#define TPS62361_VSEL0_GPIO 7
-
-/* AUXCLKx reg fields */
-#define AUXCLK_ENABLE_MASK (1 << 8)
-#define AUXCLK_SRCSELECT_SHIFT 1
-#define AUXCLK_SRCSELECT_MASK (3 << 1)
-#define AUXCLK_CLKDIV_SHIFT 16
-#define AUXCLK_CLKDIV_MASK (0xF << 16)
-
-#define AUXCLK_SRCSELECT_SYS_CLK 0
-#define AUXCLK_SRCSELECT_CORE_DPLL 1
-#define AUXCLK_SRCSELECT_PER_DPLL 2
-#define AUXCLK_SRCSELECT_ALTERNATE 3
-
-#define AUXCLK_CLKDIV_2 1
-#define AUXCLK_CLKDIV_16 0xF
-
-/* ALTCLKSRC */
-#define ALTCLKSRC_MODE_MASK 3
-#define ALTCLKSRC_ENABLE_INT_MASK 4
-#define ALTCLKSRC_ENABLE_EXT_MASK 8
-
-#define ALTCLKSRC_MODE_ACTIVE 1
-
-#define DPLL_NO_LOCK 0
-#define DPLL_LOCK 1
-
-/* Clock Defines */
-#define V_OSCK 38400000 /* Clock output from T2 */
-#define V_SCLK V_OSCK
-
-struct omap4_scrm_regs {
- u32 revision; /* 0x0000 */
- u32 pad00[63];
- u32 clksetuptime; /* 0x0100 */
- u32 pmicsetuptime; /* 0x0104 */
- u32 pad01[2];
- u32 altclksrc; /* 0x0110 */
- u32 pad02[2];
- u32 c2cclkm; /* 0x011c */
- u32 pad03[56];
- u32 extclkreq; /* 0x0200 */
- u32 accclkreq; /* 0x0204 */
- u32 pwrreq; /* 0x0208 */
- u32 pad04[1];
- u32 auxclkreq0; /* 0x0210 */
- u32 auxclkreq1; /* 0x0214 */
- u32 auxclkreq2; /* 0x0218 */
- u32 auxclkreq3; /* 0x021c */
- u32 auxclkreq4; /* 0x0220 */
- u32 auxclkreq5; /* 0x0224 */
- u32 pad05[3];
- u32 c2cclkreq; /* 0x0234 */
- u32 pad06[54];
- u32 auxclk0; /* 0x0310 */
- u32 auxclk1; /* 0x0314 */
- u32 auxclk2; /* 0x0318 */
- u32 auxclk3; /* 0x031c */
- u32 auxclk4; /* 0x0320 */
- u32 auxclk5; /* 0x0324 */
- u32 pad07[54];
- u32 rsttime_reg; /* 0x0400 */
- u32 pad08[6];
- u32 c2crstctrl; /* 0x041c */
- u32 extpwronrstctrl; /* 0x0420 */
- u32 pad09[59];
- u32 extwarmrstst_reg; /* 0x0510 */
- u32 apewarmrstst_reg; /* 0x0514 */
- u32 pad10[1];
- u32 c2cwarmrstst_reg; /* 0x051C */
-};
-#endif /* _CLOCKS_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
deleted file mode 100644
index 4c9ed4558330..000000000000
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2010
- * Texas Instruments, <www.ti.com>
- */
-
-#ifndef _CPU_H
-#define _CPU_H
-
-#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-#include <asm/types.h>
-#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
-
-#include <asm/arch/hardware.h>
-
-#ifndef __KERNEL_STRICT_NAMES
-#ifndef __ASSEMBLY__
-struct gptimer {
- u32 tidr; /* 0x00 r */
- u8 res[0xc];
- u32 tiocp_cfg; /* 0x10 rw */
- u32 tistat; /* 0x14 r */
- u32 tisr; /* 0x18 rw */
- u32 tier; /* 0x1c rw */
- u32 twer; /* 0x20 rw */
- u32 tclr; /* 0x24 rw */
- u32 tcrr; /* 0x28 rw */
- u32 tldr; /* 0x2c rw */
- u32 ttgr; /* 0x30 rw */
- u32 twpc; /* 0x34 r */
- u32 tmar; /* 0x38 rw */
- u32 tcar1; /* 0x3c r */
- u32 tcicr; /* 0x40 rw */
- u32 tcar2; /* 0x44 r */
-};
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL_STRICT_NAMES */
-
-/* enable sys_clk NO-prescale /1 */
-#define GPT_EN ((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
-
-/* Watchdog */
-#ifndef __KERNEL_STRICT_NAMES
-#ifndef __ASSEMBLY__
-struct watchdog {
- u8 res1[0x34];
- u32 wwps; /* 0x34 r */
- u8 res2[0x10];
- u32 wspr; /* 0x48 rw */
-};
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL_STRICT_NAMES */
-
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-#define TCLR_ST (0x1 << 0)
-#define TCLR_AR (0x1 << 1)
-#define TCLR_PRE (0x1 << 5)
-
-/* I2C base */
-#define I2C_BASE1 (OMAP44XX_L4_PER_BASE + 0x70000)
-#define I2C_BASE2 (OMAP44XX_L4_PER_BASE + 0x72000)
-#define I2C_BASE3 (OMAP44XX_L4_PER_BASE + 0x60000)
-#define I2C_BASE4 (OMAP44XX_L4_PER_BASE + 0x350000)
-
-/* MUSB base */
-#define MUSB_BASE (OMAP44XX_L4_CORE_BASE + 0xAB000)
-
-/* OMAP4 GPIO registers */
-#define OMAP_GPIO_REVISION 0x0000
-#define OMAP_GPIO_SYSCONFIG 0x0010
-#define OMAP_GPIO_SYSSTATUS 0x0114
-#define OMAP_GPIO_IRQSTATUS1 0x0118
-#define OMAP_GPIO_IRQSTATUS2 0x0128
-#define OMAP_GPIO_IRQENABLE2 0x012c
-#define OMAP_GPIO_IRQENABLE1 0x011c
-#define OMAP_GPIO_WAKE_EN 0x0120
-#define OMAP_GPIO_CTRL 0x0130
-#define OMAP_GPIO_OE 0x0134
-#define OMAP_GPIO_DATAIN 0x0138
-#define OMAP_GPIO_DATAOUT 0x013c
-#define OMAP_GPIO_LEVELDETECT0 0x0140
-#define OMAP_GPIO_LEVELDETECT1 0x0144
-#define OMAP_GPIO_RISINGDETECT 0x0148
-#define OMAP_GPIO_FALLINGDETECT 0x014c
-#define OMAP_GPIO_DEBOUNCE_EN 0x0150
-#define OMAP_GPIO_DEBOUNCE_VAL 0x0154
-#define OMAP_GPIO_CLEARIRQENABLE1 0x0160
-#define OMAP_GPIO_SETIRQENABLE1 0x0164
-#define OMAP_GPIO_CLEARWKUENA 0x0180
-#define OMAP_GPIO_SETWKUENA 0x0184
-#define OMAP_GPIO_CLEARDATAOUT 0x0190
-#define OMAP_GPIO_SETDATAOUT 0x0194
-
-/*
- * PRCM
- */
-
-/* PRM */
-#define PRM_BASE 0x4A306000
-#define PRM_DEVICE_BASE (PRM_BASE + 0x1B00)
-
-#define PRM_RSTCTRL PRM_DEVICE_BASE
-#define PRM_RSTCTRL_RESET 0x01
-#define PRM_RSTST (PRM_DEVICE_BASE + 0x4)
-#define PRM_RSTST_WARM_RESET_MASK 0x07EA
-
-#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap4/ehci.h b/arch/arm/include/asm/arch-omap4/ehci.h
deleted file mode 100644
index e8fe88f2afc4..000000000000
--- a/arch/arm/include/asm/arch-omap4/ehci.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * OMAP EHCI port support
- * Based on LINUX KERNEL
- * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com
- * Author: Govindraj R <govindraj.raja at ti.com>
- */
-
-#ifndef _OMAP4_EHCI_H_
-#define _OMAP4_EHCI_H_
-
-#define OMAP_EHCI_BASE (OMAP44XX_L4_CORE_BASE + 0x64C00)
-#define OMAP_UHH_BASE (OMAP44XX_L4_CORE_BASE + 0x64000)
-#define OMAP_USBTLL_BASE (OMAP44XX_L4_CORE_BASE + 0x62000)
-
-/* UHH, TLL and opt clocks */
-#define CM_L3INIT_HSUSBHOST_CLKCTRL 0x4A009358UL
-
-#define HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK (1 << 24)
-
-/* TLL Register Set */
-#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
-#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
-#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
-#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
-#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1
-
-#define OMAP_UHH_SYSCONFIG_SOFTRESET 1
-#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2)
-#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2)
-#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4)
-
-#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \
- OMAP_UHH_SYSCONFIG_NOSTDBY)
-
-#endif /* _OMAP4_EHCI_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h
deleted file mode 100644
index aceb3e227c9e..000000000000
--- a/arch/arm/include/asm/arch-omap4/gpio.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix at windriver.com>
- *
- * This work is derived from the linux 2.6.27 kernel source
- * To fetch, use the kernel repository
- * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
- * Use the v2.6.27 tag.
- *
- * Below is the original's header including its copyright
- *
- * linux/arch/arm/plat-omap/gpio.c
- *
- * Support functions for OMAP GPIO
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- * Written by Juha Yrjölä <juha.yrjola at nokia.com>
- */
-#ifndef _GPIO_OMAP4_H
-#define _GPIO_OMAP4_H
-
-#include <asm/omap_gpio.h>
-
-#define OMAP_MAX_GPIO 192
-
-#define OMAP44XX_GPIO1_BASE 0x4A310000
-#define OMAP44XX_GPIO2_BASE 0x48055000
-#define OMAP44XX_GPIO3_BASE 0x48057000
-#define OMAP44XX_GPIO4_BASE 0x48059000
-#define OMAP44XX_GPIO5_BASE 0x4805B000
-#define OMAP44XX_GPIO6_BASE 0x4805D000
-
-#endif /* _GPIO_OMAP4_H */
diff --git a/arch/arm/include/asm/arch-omap4/hardware.h b/arch/arm/include/asm/arch-omap4/hardware.h
deleted file mode 100644
index 67e3dae7bcea..000000000000
--- a/arch/arm/include/asm/arch-omap4/hardware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * hardware.h
- *
- * hardware specific header
- *
- * Copyright (C) 2013, Texas Instruments, Incorporated - https://www.ti.com/
- */
-
-#ifndef __OMAP_HARDWARE_H
-#define __OMAP_HARDWARE_H
-
-#include <asm/arch/omap.h>
-
-/*
- * Common hardware definitions
- */
-
-/* BCH Error Location Module */
-#define ELM_BASE 0x48078000
-
-/* GPMC Base address */
-#define GPMC_BASE 0x50000000
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap4/i2c.h b/arch/arm/include/asm/arch-omap4/i2c.h
deleted file mode 100644
index c8f2f9716f12..000000000000
--- a/arch/arm/include/asm/arch-omap4/i2c.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2004-2010
- * Texas Instruments, <www.ti.com>
- */
-#ifndef _OMAP4_I2C_H_
-#define _OMAP4_I2C_H_
-
-#define I2C_DEFAULT_BASE I2C_BASE1
-
-#endif /* _OMAP4_I2C_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/mem.h b/arch/arm/include/asm/arch-omap4/mem.h
deleted file mode 100644
index 3026a002db39..000000000000
--- a/arch/arm/include/asm/arch-omap4/mem.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2008
- * Texas Instruments, <www.ti.com>
- *
- * Author
- * Mansoor Ahamed <mansoor.ahamed at ti.com>
- *
- * Initial Code from:
- * Richard Woodruff <r-woodruff2 at ti.com>
- */
-
-#ifndef _MEM_H_
-#define _MEM_H_
-
-/*
- * GPMC settings -
- * Definitions is as per the following format
- * #define <PART>_GPMC_CONFIG<x> <value>
- * Where:
- * PART is the part name e.g. STNOR - Intel Strata Flash
- * x is GPMC config registers from 1 to 6 (there will be 6 macros)
- * Value is corresponding value
- *
- * For every valid PRCM configuration there should be only one definition of
- * the same. if values are independent of the board, this definition will be
- * present in this file if values are dependent on the board, then this should
- * go into corresponding mem-boardName.h file
- *
- * Currently valid part Names are (PART):
- * M_NAND - Micron NAND
- * STNOR - STMicrolelctronics M29W128GL
- */
-#define GPMC_SIZE_256M 0x0
-#define GPMC_SIZE_128M 0x8
-#define GPMC_SIZE_64M 0xC
-#define GPMC_SIZE_32M 0xE
-#define GPMC_SIZE_16M 0xF
-
-#define M_NAND_GPMC_CONFIG1 0x00000800
-#define M_NAND_GPMC_CONFIG2 0x001e1e00
-#define M_NAND_GPMC_CONFIG3 0x001e1e00
-#define M_NAND_GPMC_CONFIG4 0x16051807
-#define M_NAND_GPMC_CONFIG5 0x00151e1e
-#define M_NAND_GPMC_CONFIG6 0x16000f80
-#define M_NAND_GPMC_CONFIG7 0x00000008
-
-#define STNOR_GPMC_CONFIG1 0x00001200
-#define STNOR_GPMC_CONFIG2 0x00101000
-#define STNOR_GPMC_CONFIG3 0x00030301
-#define STNOR_GPMC_CONFIG4 0x10041004
-#define STNOR_GPMC_CONFIG5 0x000C1010
-#define STNOR_GPMC_CONFIG6 0x08070280
-#define STNOR_GPMC_CONFIG7 0x00000F48
-
-/* max number of GPMC Chip Selects */
-#define GPMC_MAX_CS 8
-/* max number of GPMC regs */
-#define GPMC_MAX_REG 7
-
-#endif /* endif _MEM_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h
deleted file mode 100644
index d06779956f6e..000000000000
--- a/arch/arm/include/asm/arch-omap4/mmc_host_def.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- * Syed Mohammed Khasim <khasim at ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation's version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef MMC_HOST_DEF_H
-#define MMC_HOST_DEF_H
-
-#include <asm/omap_mmc.h>
-
-/*
- * OMAP HSMMC register definitions
- */
-
-#define OMAP_HSMMC1_BASE 0x4809C000
-#define OMAP_HSMMC2_BASE 0x480B4000
-#define OMAP_HSMMC3_BASE 0x480AD000
-
-#endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-omap4/mux_omap4.h b/arch/arm/include/asm/arch-omap4/mux_omap4.h
deleted file mode 100644
index 854203c4e23d..000000000000
--- a/arch/arm/include/asm/arch-omap4/mux_omap4.h
+++ /dev/null
@@ -1,328 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2004-2009
- * Texas Instruments Incorporated
- * Richard Woodruff <r-woodruff2 at ti.com>
- * Aneesh V <aneesh at ti.com>
- * Balaji Krishnamoorthy <balajitk at ti.com>
- */
-#ifndef _MUX_OMAP4_H_
-#define _MUX_OMAP4_H_
-
-#include <asm/types.h>
-
-struct pad_conf_entry {
-
- u16 offset;
-
- u16 val;
-
-};
-
-#ifdef CONFIG_OFF_PADCONF
-#define OFF_PD (1 << 12)
-#define OFF_PU (3 << 12)
-#define OFF_OUT_PTD (0 << 10)
-#define OFF_OUT_PTU (2 << 10)
-#define OFF_IN (1 << 10)
-#define OFF_OUT (0 << 10)
-#define OFF_EN (1 << 9)
-#else
-#define OFF_PD (0 << 12)
-#define OFF_PU (0 << 12)
-#define OFF_OUT_PTD (0 << 10)
-#define OFF_OUT_PTU (0 << 10)
-#define OFF_IN (0 << 10)
-#define OFF_OUT (0 << 10)
-#define OFF_EN (0 << 9)
-#endif
-
-#define IEN (1 << 8)
-#define IDIS (0 << 8)
-#define PTU (3 << 3)
-#define PTD (1 << 3)
-#define EN (1 << 3)
-#define DIS (0 << 3)
-
-#define M0 0
-#define M1 1
-#define M2 2
-#define M3 3
-#define M4 4
-#define M5 5
-#define M6 6
-#define M7 7
-
-#define SAFE_MODE M7
-
-#ifdef CONFIG_OFF_PADCONF
-#define OFF_IN_PD (OFF_PD | OFF_IN | OFF_EN)
-#define OFF_IN_PU (OFF_PU | OFF_IN | OFF_EN)
-#define OFF_OUT_PD (OFF_OUT_PTD | OFF_OUT | OFF_EN)
-#define OFF_OUT_PU (OFF_OUT_PTU | OFF_OUT | OFF_EN)
-#else
-#define OFF_IN_PD 0
-#define OFF_IN_PU 0
-#define OFF_OUT_PD 0
-#define OFF_OUT_PU 0
-#endif
-
-#define CORE_REVISION 0x0000
-#define CORE_HWINFO 0x0004
-#define CORE_SYSCONFIG 0x0010
-#define GPMC_AD0 0x0040
-#define GPMC_AD1 0x0042
-#define GPMC_AD2 0x0044
-#define GPMC_AD3 0x0046
-#define GPMC_AD4 0x0048
-#define GPMC_AD5 0x004A
-#define GPMC_AD6 0x004C
-#define GPMC_AD7 0x004E
-#define GPMC_AD8 0x0050
-#define GPMC_AD9 0x0052
-#define GPMC_AD10 0x0054
-#define GPMC_AD11 0x0056
-#define GPMC_AD12 0x0058
-#define GPMC_AD13 0x005A
-#define GPMC_AD14 0x005C
-#define GPMC_AD15 0x005E
-#define GPMC_A16 0x0060
-#define GPMC_A17 0x0062
-#define GPMC_A18 0x0064
-#define GPMC_A19 0x0066
-#define GPMC_A20 0x0068
-#define GPMC_A21 0x006A
-#define GPMC_A22 0x006C
-#define GPMC_A23 0x006E
-#define GPMC_A24 0x0070
-#define GPMC_A25 0x0072
-#define GPMC_NCS0 0x0074
-#define GPMC_NCS1 0x0076
-#define GPMC_NCS2 0x0078
-#define GPMC_NCS3 0x007A
-#define GPMC_NWP 0x007C
-#define GPMC_CLK 0x007E
-#define GPMC_NADV_ALE 0x0080
-#define GPMC_NOE 0x0082
-#define GPMC_NWE 0x0084
-#define GPMC_NBE0_CLE 0x0086
-#define GPMC_NBE1 0x0088
-#define GPMC_WAIT0 0x008A
-#define GPMC_WAIT1 0x008C
-#define C2C_DATA11 0x008E
-#define C2C_DATA12 0x0090
-#define C2C_DATA13 0x0092
-#define C2C_DATA14 0x0094
-#define C2C_DATA15 0x0096
-#define HDMI_HPD 0x0098
-#define HDMI_CEC 0x009A
-#define HDMI_DDC_SCL 0x009C
-#define HDMI_DDC_SDA 0x009E
-#define CSI21_DX0 0x00A0
-#define CSI21_DY0 0x00A2
-#define CSI21_DX1 0x00A4
-#define CSI21_DY1 0x00A6
-#define CSI21_DX2 0x00A8
-#define CSI21_DY2 0x00AA
-#define CSI21_DX3 0x00AC
-#define CSI21_DY3 0x00AE
-#define CSI21_DX4 0x00B0
-#define CSI21_DY4 0x00B2
-#define CSI22_DX0 0x00B4
-#define CSI22_DY0 0x00B6
-#define CSI22_DX1 0x00B8
-#define CSI22_DY1 0x00BA
-#define CAM_SHUTTER 0x00BC
-#define CAM_STROBE 0x00BE
-#define CAM_GLOBALRESET 0x00C0
-#define USBB1_ULPITLL_CLK 0x00C2
-#define USBB1_ULPITLL_STP 0x00C4
-#define USBB1_ULPITLL_DIR 0x00C6
-#define USBB1_ULPITLL_NXT 0x00C8
-#define USBB1_ULPITLL_DAT0 0x00CA
-#define USBB1_ULPITLL_DAT1 0x00CC
-#define USBB1_ULPITLL_DAT2 0x00CE
-#define USBB1_ULPITLL_DAT3 0x00D0
-#define USBB1_ULPITLL_DAT4 0x00D2
-#define USBB1_ULPITLL_DAT5 0x00D4
-#define USBB1_ULPITLL_DAT6 0x00D6
-#define USBB1_ULPITLL_DAT7 0x00D8
-#define USBB1_HSIC_DATA 0x00DA
-#define USBB1_HSIC_STROBE 0x00DC
-#define USBC1_ICUSB_DP 0x00DE
-#define USBC1_ICUSB_DM 0x00E0
-#define SDMMC1_CLK 0x00E2
-#define SDMMC1_CMD 0x00E4
-#define SDMMC1_DAT0 0x00E6
-#define SDMMC1_DAT1 0x00E8
-#define SDMMC1_DAT2 0x00EA
-#define SDMMC1_DAT3 0x00EC
-#define SDMMC1_DAT4 0x00EE
-#define SDMMC1_DAT5 0x00F0
-#define SDMMC1_DAT6 0x00F2
-#define SDMMC1_DAT7 0x00F4
-#define ABE_MCBSP2_CLKX 0x00F6
-#define ABE_MCBSP2_DR 0x00F8
-#define ABE_MCBSP2_DX 0x00FA
-#define ABE_MCBSP2_FSX 0x00FC
-#define ABE_MCBSP1_CLKX 0x00FE
-#define ABE_MCBSP1_DR 0x0100
-#define ABE_MCBSP1_DX 0x0102
-#define ABE_MCBSP1_FSX 0x0104
-#define ABE_PDM_UL_DATA 0x0106
-#define ABE_PDM_DL_DATA 0x0108
-#define ABE_PDM_FRAME 0x010A
-#define ABE_PDM_LB_CLK 0x010C
-#define ABE_CLKS 0x010E
-#define ABE_DMIC_CLK1 0x0110
-#define ABE_DMIC_DIN1 0x0112
-#define ABE_DMIC_DIN2 0x0114
-#define ABE_DMIC_DIN3 0x0116
-#define UART2_CTS 0x0118
-#define UART2_RTS 0x011A
-#define UART2_RX 0x011C
-#define UART2_TX 0x011E
-#define HDQ_SIO 0x0120
-#define I2C1_SCL 0x0122
-#define I2C1_SDA 0x0124
-#define I2C2_SCL 0x0126
-#define I2C2_SDA 0x0128
-#define I2C3_SCL 0x012A
-#define I2C3_SDA 0x012C
-#define I2C4_SCL 0x012E
-#define I2C4_SDA 0x0130
-#define MCSPI1_CLK 0x0132
-#define MCSPI1_SOMI 0x0134
-#define MCSPI1_SIMO 0x0136
-#define MCSPI1_CS0 0x0138
-#define MCSPI1_CS1 0x013A
-#define MCSPI1_CS2 0x013C
-#define MCSPI1_CS3 0x013E
-#define UART3_CTS_RCTX 0x0140
-#define UART3_RTS_SD 0x0142
-#define UART3_RX_IRRX 0x0144
-#define UART3_TX_IRTX 0x0146
-#define SDMMC5_CLK 0x0148
-#define SDMMC5_CMD 0x014A
-#define SDMMC5_DAT0 0x014C
-#define SDMMC5_DAT1 0x014E
-#define SDMMC5_DAT2 0x0150
-#define SDMMC5_DAT3 0x0152
-#define MCSPI4_CLK 0x0154
-#define MCSPI4_SIMO 0x0156
-#define MCSPI4_SOMI 0x0158
-#define MCSPI4_CS0 0x015A
-#define UART4_RX 0x015C
-#define UART4_TX 0x015E
-#define USBB2_ULPITLL_CLK 0x0160
-#define USBB2_ULPITLL_STP 0x0162
-#define USBB2_ULPITLL_DIR 0x0164
-#define USBB2_ULPITLL_NXT 0x0166
-#define USBB2_ULPITLL_DAT0 0x0168
-#define USBB2_ULPITLL_DAT1 0x016A
-#define USBB2_ULPITLL_DAT2 0x016C
-#define USBB2_ULPITLL_DAT3 0x016E
-#define USBB2_ULPITLL_DAT4 0x0170
-#define USBB2_ULPITLL_DAT5 0x0172
-#define USBB2_ULPITLL_DAT6 0x0174
-#define USBB2_ULPITLL_DAT7 0x0176
-#define USBB2_HSIC_DATA 0x0178
-#define USBB2_HSIC_STROBE 0x017A
-#define UNIPRO_TX0 0x017C
-#define UNIPRO_TY0 0x017E
-#define UNIPRO_TX1 0x0180
-#define UNIPRO_TY1 0x0182
-#define UNIPRO_TX2 0x0184
-#define UNIPRO_TY2 0x0186
-#define UNIPRO_RX0 0x0188
-#define UNIPRO_RY0 0x018A
-#define UNIPRO_RX1 0x018C
-#define UNIPRO_RY1 0x018E
-#define UNIPRO_RX2 0x0190
-#define UNIPRO_RY2 0x0192
-#define USBA0_OTG_CE 0x0194
-#define USBA0_OTG_DP 0x0196
-#define USBA0_OTG_DM 0x0198
-#define FREF_CLK1_OUT 0x019A
-#define FREF_CLK2_OUT 0x019C
-#define SYS_NIRQ1 0x019E
-#define SYS_NIRQ2 0x01A0
-#define SYS_BOOT0 0x01A2
-#define SYS_BOOT1 0x01A4
-#define SYS_BOOT2 0x01A6
-#define SYS_BOOT3 0x01A8
-#define SYS_BOOT4 0x01AA
-#define SYS_BOOT5 0x01AC
-#define DPM_EMU0 0x01AE
-#define DPM_EMU1 0x01B0
-#define DPM_EMU2 0x01B2
-#define DPM_EMU3 0x01B4
-#define DPM_EMU4 0x01B6
-#define DPM_EMU5 0x01B8
-#define DPM_EMU6 0x01BA
-#define DPM_EMU7 0x01BC
-#define DPM_EMU8 0x01BE
-#define DPM_EMU9 0x01C0
-#define DPM_EMU10 0x01C2
-#define DPM_EMU11 0x01C4
-#define DPM_EMU12 0x01C6
-#define DPM_EMU13 0x01C8
-#define DPM_EMU14 0x01CA
-#define DPM_EMU15 0x01CC
-#define DPM_EMU16 0x01CE
-#define DPM_EMU17 0x01D0
-#define DPM_EMU18 0x01D2
-#define DPM_EMU19 0x01D4
-#define WAKEUPEVENT_0 0x01D8
-#define WAKEUPEVENT_1 0x01DC
-#define WAKEUPEVENT_2 0x01E0
-#define WAKEUPEVENT_3 0x01E4
-#define WAKEUPEVENT_4 0x01E8
-#define WAKEUPEVENT_5 0x01EC
-#define WAKEUPEVENT_6 0x01F0
-
-#define WKUP_REVISION 0x0000
-#define WKUP_HWINFO 0x0004
-#define WKUP_SYSCONFIG 0x0010
-#define PAD0_SIM_IO 0x0040
-#define PAD1_SIM_CLK 0x0042
-#define PAD0_SIM_RESET 0x0044
-#define PAD1_SIM_CD 0x0046
-#define PAD0_SIM_PWRCTRL 0x0048
-#define PAD1_SR_SCL 0x004A
-#define PAD0_SR_SDA 0x004C
-#define PAD1_FREF_XTAL_IN 0x004E
-#define PAD0_FREF_SLICER_IN 0x0050
-#define PAD1_FREF_CLK_IOREQ 0x0052
-#define PAD0_FREF_CLK0_OUT 0x0054
-#define PAD1_FREF_CLK3_REQ 0x0056
-#define PAD0_FREF_CLK3_OUT 0x0058
-#define PAD1_FREF_CLK4_REQ 0x005A
-#define PAD0_FREF_CLK4_OUT 0x005C
-#define PAD1_SYS_32K 0x005E
-#define PAD0_SYS_NRESPWRON 0x0060
-#define PAD1_SYS_NRESWARM 0x0062
-#define PAD0_SYS_PWR_REQ 0x0064
-#define PAD1_SYS_PWRON_RESET 0x0066
-#define PAD0_SYS_BOOT6 0x0068
-#define PAD1_SYS_BOOT7 0x006A
-#define PAD0_JTAG_NTRST 0x006C
-#define PAD1_JTAG_TCK 0x006D
-#define PAD0_JTAG_RTCK 0x0070
-#define PAD1_JTAG_TMS_TMSC 0x0072
-#define PAD0_JTAG_TDI 0x0074
-#define PAD1_JTAG_TDO 0x0076
-#define PADCONF_WAKEUPEVENT_0 0x007C
-#define CONTROL_SMART1NOPMIO_PADCONF_0 0x05A0
-#define CONTROL_SMART1NOPMIO_PADCONF_1 0x05A4
-#define PADCONF_MODE 0x05A8
-#define CONTROL_XTAL_OSCILLATOR 0x05AC
-#define CONTROL_CONTROL_I2C_2 0x0604
-#define CONTROL_CONTROL_JTAG 0x0608
-#define CONTROL_CONTROL_SYS 0x060C
-#define CONTROL_SPARE_RW 0x0614
-#define CONTROL_SPARE_R 0x0618
-#define CONTROL_SPARE_R_C0 0x061C
-
-#define CONTROL_WKUP_PAD1_FREF_CLK4_REQ 0x4A31E05A
-#endif /* _MUX_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
deleted file mode 100644
index 8919088a7061..000000000000
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Authors:
- * Aneesh V <aneesh at ti.com>
- *
- * Derived from OMAP3 work by
- * Richard Woodruff <r-woodruff2 at ti.com>
- * Syed Mohammed Khasim <x0khasim at ti.com>
- */
-
-#ifndef _OMAP4_H_
-#define _OMAP4_H_
-
-#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-#include <asm/types.h>
-#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
-
-#include <linux/sizes.h>
-
-/*
- * L4 Peripherals - L4 Wakeup and L4 Core now
- */
-#define OMAP44XX_L4_CORE_BASE 0x4A000000
-#define OMAP44XX_L4_WKUP_BASE 0x4A300000
-#define OMAP44XX_L4_PER_BASE 0x48000000
-
-#define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000
-#define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000
-#define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START
-#define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END
-
-/* CONTROL_ID_CODE */
-#define CONTROL_ID_CODE 0x4A002204
-
-#define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F
-#define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F
-#define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F
-#define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F
-#define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F
-#define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F
-#define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F
-#define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F
-
-/* UART */
-#define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000)
-#define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000)
-#define UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000)
-
-/* General Purpose Timers */
-#define GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000)
-#define GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000)
-#define GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000)
-
-/* Watchdog Timer2 - MPU watchdog */
-#define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000)
-
-/*
- * Hardware Register Details
- */
-
-/* Watchdog Timer */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* GP Timer */
-#define TCLR_ST (0x1 << 0)
-#define TCLR_AR (0x1 << 1)
-#define TCLR_PRE (0x1 << 5)
-
-/* Control Module */
-#define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5)
-#define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f
-#define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110
-#define CONTROL_EFUSE_2_OVERRIDE 0x99084000
-
-/* LPDDR2 IO regs */
-#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C
-#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E
-#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C
-#define LPDDR2IO_GR10_WD_MASK (3 << 17)
-#define CONTROL_LPDDR2IO_3_VAL 0xA0888C0F
-
-/* CONTROL_EFUSE_2 */
-#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
-
-#define MMC1_PWRDNZ (1 << 26)
-#define MMC1_PBIASLITE_PWRDNZ (1 << 22)
-#define MMC1_PBIASLITE_VMODE (1 << 21)
-
-#ifndef __ASSEMBLY__
-
-struct s32ktimer {
- unsigned char res[0x10];
- unsigned int s32k_cr; /* 0x10 */
-};
-
-#define DEVICE_TYPE_SHIFT (0x8)
-#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Non-secure SRAM Addresses
- * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
- * at 0x40304000(EMU base) so that our code works for both EMU and GP
- */
-#define NON_SECURE_SRAM_START 0x40304000
-#define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */
-#define NON_SECURE_SRAM_IMG_END 0x4030C000
-#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_ROM_VECT_BASE 0x4030D000
-
-/* ABB settings */
-#define OMAP_ABB_SETTLING_TIME 50
-#define OMAP_ABB_CLOCK_CYCLES 16
-
-/* ABB tranxdone mask */
-#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
-
-#define OMAP44XX_SAR_RAM_BASE 0x4a326000
-#define OMAP_REBOOT_REASON_OFFSET 0xA0C
-#define OMAP_REBOOT_REASON_SIZE 0x0F
-
-/* Boot parameters */
-#ifndef __ASSEMBLY__
-struct omap_boot_parameters {
- unsigned int boot_message;
- unsigned int boot_device_descriptor;
- unsigned char boot_device;
- unsigned char reset_reason;
- unsigned char ch_flags;
-};
-
-int omap_reboot_mode(char *mode, unsigned int length);
-int omap_reboot_mode_clear(void);
-int omap_reboot_mode_store(char *mode);
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h
deleted file mode 100644
index d24944af0ae8..000000000000
--- a/arch/arm/include/asm/arch-omap4/spl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
- */
-#ifndef _ASM_ARCH_SPL_H_
-#define _ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_NONE 0x00
-#define BOOT_DEVICE_XIP 0x01
-#define BOOT_DEVICE_XIPWAIT 0x02
-#define BOOT_DEVICE_NAND 0x03
-#define BOOT_DEVICE_ONENAND 0x04
-#define BOOT_DEVICE_MMC1 0x05
-#define BOOT_DEVICE_MMC2 0x06
-#define BOOT_DEVICE_MMC2_2 0x07
-#define BOOT_DEVICE_UART 0x43
-#define BOOT_DEVICE_USB 0x45
-
-#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
-#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2
-#endif
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
deleted file mode 100644
index b2a688765850..000000000000
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- */
-
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-#include <asm/arch/omap.h>
-#include <asm/arch/clock.h>
-#include <asm/io.h>
-#include <asm/omap_common.h>
-#include <linux/mtd/omap_gpmc.h>
-#include <asm/arch/mux_omap4.h>
-#include <asm/ti-common/sys_proto.h>
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
-extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
-extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
-extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
-extern const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2;
-extern const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2;
-extern const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2;
-#else
-extern const struct lpddr2_device_details elpida_2G_S4_details;
-extern const struct lpddr2_device_details elpida_4G_S4_details;
-#endif
-
-#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-extern const struct lpddr2_device_timings jedec_default_timings;
-#else
-extern const struct lpddr2_device_timings elpida_2G_S4_timings;
-#endif
-
-struct omap_sysinfo {
- char *board_string;
-};
-extern const struct omap_sysinfo sysinfo;
-
-void gpmc_init(void);
-void watchdog_init(void);
-u32 get_device_type(void);
-void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
-void set_muxconf_regs(void);
-u32 wait_on_value(u32, u32, void *, u32);
-void sdelay(unsigned long);
-void setup_early_clocks(void);
-void prcm_init(void);
-void do_board_detect(void);
-void bypass_dpll(u32 const base);
-void freq_update_core(void);
-u32 get_sys_clk_freq(void);
-u32 omap4_ddr_clk(void);
-void cancel_out(u32 *num, u32 *den, u32 den_limit);
-void sdram_init(void);
-u32 omap_sdram_size(void);
-u32 cortex_rev(void);
-void save_omap_boot_params(void);
-void init_omap_revision(void);
-void do_io_settings(void);
-void sri2c_init(void);
-int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
-u32 warm_reset(void);
-void force_emif_self_refresh(void);
-void setup_warmreset_time(void);
-
-#define OMAP4_SERVICE_PL310_CONTROL_REG_SET 0x102
-
-#endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 17fdfbcffb7a..dc00f4707267 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -490,7 +490,7 @@ struct omap_sys_ctrl_regs {
u32 ctrl_core_sma_sw_1;
};
-#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX)
+#if defined(CONFIG_OMAP54XX)
struct dpll_params {
u32 m;
u32 n;
@@ -523,7 +523,7 @@ struct dpll_regs {
u32 cm_div_h23_dpll;
u32 cm_div_h24_dpll;
};
-#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+#endif /* CONFIG_OMAP54XX */
struct dplls {
const struct dpll_params *mpu;
@@ -547,7 +547,7 @@ struct pmic_data {
int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data);
};
-#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX)
+#if defined(CONFIG_OMAP54XX)
enum {
OPP_LOW,
OPP_NOM,
@@ -593,7 +593,7 @@ struct vcores_data {
struct volts eve;
struct volts iva;
};
-#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+#endif /* CONFIG_OMAP54XX */
extern struct prcm_regs const **prcm;
extern struct prcm_regs const omap5_es1_prcm;
@@ -626,7 +626,7 @@ const struct dpll_params *get_iva_dpll_params(struct dplls const *);
const struct dpll_params *get_usb_dpll_params(struct dplls const *);
const struct dpll_params *get_abe_dpll_params(struct dplls const *);
-#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX)
+#if defined(CONFIG_OMAP54XX)
void do_enable_clocks(u32 const *clk_domains,
u32 const *clk_modules_hw_auto,
u32 const *clk_modules_explicit_en,
@@ -635,7 +635,7 @@ void do_enable_clocks(u32 const *clk_domains,
void do_disable_clocks(u32 const *clk_domains,
u32 const *clk_modules_disable,
u8 wait_for_disable);
-#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+#endif /* CONFIG_OMAP54XX */
void do_enable_ipu_clocks(u32 const *clk_domains,
u32 const *clk_modules_hw_auto,
@@ -653,9 +653,9 @@ void enable_basic_uboot_clocks(void);
void enable_usb_clocks(int index);
void disable_usb_clocks(int index);
-#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX)
+#if defined(CONFIG_OMAP54XX)
void scale_vcores(struct vcores_data const *);
-#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+#endif /* CONFIG_OMAP54XX */
int get_voltrail_opp(int rail_offset);
u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 8465b5426d81..c07dd68e6cee 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -29,29 +29,6 @@ config OMAP34XX
imply SYS_THUMB_BUILD
imply TWL4030_POWER
-config OMAP44XX
- bool "OMAP44XX SoC"
- select DM_EVENT
- select SPL_USE_TINY_PRINTF
- select SPL_SYS_NO_VECTOR_TABLE if SPL
- imply NAND_OMAP_ELM
- imply NAND_OMAP_GPMC
- imply SPL_DISPLAY_PRINT
- imply SPL_FS_EXT4
- imply SPL_FS_FAT
- imply SPL_GPIO
- imply SPL_I2C
- imply SPL_LIBCOMMON_SUPPORT
- imply SPL_LIBDISK_SUPPORT
- imply SPL_LIBGENERIC_SUPPORT
- imply SPL_MMC
- imply SPL_NAND_SIMPLE
- imply SPL_NAND_SUPPORT
- imply SPL_POWER
- imply SPL_SERIAL
- imply SYS_I2C_OMAP24XX
- imply SYS_THUMB_BUILD
-
config OMAP54XX
bool "OMAP54XX SoC"
select ARM_CORTEX_A15_CVE_2017_5715
@@ -162,7 +139,7 @@ config SYS_AUTOMATIC_SDRAM_DETECTION
bool
choice
- depends on OMAP44XX || OMAP54XX
+ depends on OMAP54XX
prompt "Static or dynamic DDR timing calculations"
default SYS_EMIF_PRECALCULATED_TIMING_REGS
help
@@ -181,8 +158,6 @@ endchoice
source "arch/arm/mach-omap2/omap3/Kconfig"
-source "arch/arm/mach-omap2/omap4/Kconfig"
-
source "arch/arm/mach-omap2/omap5/Kconfig"
source "arch/arm/mach-omap2/am33xx/Kconfig"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8c10c694dffb..d683c64566a1 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,7 +5,6 @@
obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
obj-$(CONFIG_OMAP34XX) += omap3/
-obj-$(CONFIG_OMAP44XX) += omap4/
obj-$(CONFIG_OMAP54XX) += omap5/
obj-y += reset.o
@@ -19,7 +18,7 @@ endif
obj-y += utils.o
obj-y += sysinfo-common.o
-ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifdef CONFIG_OMAP54XX
obj-y += hwinit-common.o
obj-y += clocks-common.o
obj-y += emif-common.o
diff --git a/arch/arm/mach-omap2/emif-common.c b/arch/arm/mach-omap2/emif-common.c
index 4d431e20779d..a60eb990f0b4 100644
--- a/arch/arm/mach-omap2/emif-common.c
+++ b/arch/arm/mach-omap2/emif-common.c
@@ -202,7 +202,6 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
}
}
-#ifndef CONFIG_OMAP44XX
static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -510,7 +509,6 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
else
dra7_ddr3_init(base, regs);
}
-#endif
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
@@ -1292,10 +1290,8 @@ static void do_sdram_init(u32 base)
if (emif_sdram_type(regs->sdram_config) ==
EMIF_SDRAM_TYPE_LPDDR2)
lpddr2_init(base, regs);
-#ifndef CONFIG_OMAP44XX
else
ddr3_init(base, regs);
-#endif
}
#ifdef CONFIG_OMAP54XX
if (warm_reset() && (emif_sdram_type(regs->sdram_config) ==
diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig
deleted file mode 100644
index 3f91c4c29760..000000000000
--- a/arch/arm/mach-omap2/omap4/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-if OMAP44XX
-
-config SYS_SOC
- default "omap4"
-
-
-endif
diff --git a/arch/arm/mach-omap2/omap4/Makefile b/arch/arm/mach-omap2/omap4/Makefile
deleted file mode 100644
index 0ed3fc768daa..000000000000
--- a/arch/arm/mach-omap2/omap4/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2010
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y += boot.o
-obj-y += sdram_elpida.o
-obj-y += hwinit.o
-obj-y += emif.o
-obj-y += prcm-regs.o
-obj-y += hw_data.o
diff --git a/arch/arm/mach-omap2/omap4/boot.c b/arch/arm/mach-omap2/omap4/boot.c
deleted file mode 100644
index a60249f7fd62..000000000000
--- a/arch/arm/mach-omap2/omap4/boot.c
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * OMAP4 boot
- *
- * Copyright (C) 2015 Paul Kocialkowski <contact at paulk.fr>
- */
-
-#include <asm/io.h>
-#include <asm/omap_common.h>
-#include <asm/arch/sys_proto.h>
-#include <spl.h>
-
-static u32 boot_devices[] = {
- BOOT_DEVICE_MMC2,
- BOOT_DEVICE_XIP,
- BOOT_DEVICE_XIPWAIT,
- BOOT_DEVICE_NAND,
- BOOT_DEVICE_XIPWAIT,
- BOOT_DEVICE_MMC1,
- BOOT_DEVICE_ONENAND,
- BOOT_DEVICE_ONENAND,
- BOOT_DEVICE_MMC2,
- BOOT_DEVICE_ONENAND,
- BOOT_DEVICE_XIPWAIT,
- BOOT_DEVICE_NAND,
- BOOT_DEVICE_NAND,
- BOOT_DEVICE_MMC1,
- BOOT_DEVICE_ONENAND,
- BOOT_DEVICE_MMC2,
- BOOT_DEVICE_XIP,
- BOOT_DEVICE_XIPWAIT,
- BOOT_DEVICE_NAND,
- BOOT_DEVICE_MMC1,
- BOOT_DEVICE_MMC1,
- BOOT_DEVICE_ONENAND,
- BOOT_DEVICE_MMC2,
- BOOT_DEVICE_XIP,
- BOOT_DEVICE_MMC2_2,
- BOOT_DEVICE_NAND,
- BOOT_DEVICE_MMC2_2,
- BOOT_DEVICE_MMC1,
- BOOT_DEVICE_MMC2_2,
- BOOT_DEVICE_MMC2_2,
- BOOT_DEVICE_NONE,
- BOOT_DEVICE_XIPWAIT,
-};
-
-u32 omap_sys_boot_device(void)
-{
- u32 sys_boot;
-
- /* Grab the first 5 bits of the status register for SYS_BOOT. */
- sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 5) - 1);
-
- if (sys_boot >= (sizeof(boot_devices) / sizeof(u32)))
- return BOOT_DEVICE_NONE;
-
- return boot_devices[sys_boot];
-}
-
-int omap_reboot_mode(char *mode, unsigned int length)
-{
- unsigned int limit;
- unsigned int i;
-
- if (length < 2)
- return -1;
-
- if (!warm_reset())
- return -1;
-
- limit = (length < OMAP_REBOOT_REASON_SIZE) ? length :
- OMAP_REBOOT_REASON_SIZE;
-
- for (i = 0; i < (limit - 1); i++)
- mode[i] = readb((u8 *)(OMAP44XX_SAR_RAM_BASE +
- OMAP_REBOOT_REASON_OFFSET + i));
-
- mode[i] = '\0';
-
- return 0;
-}
-
-int omap_reboot_mode_clear(void)
-{
- writeb(0, (u8 *)(OMAP44XX_SAR_RAM_BASE + OMAP_REBOOT_REASON_OFFSET));
-
- return 0;
-}
-
-int omap_reboot_mode_store(char *mode)
-{
- unsigned int i;
-
- for (i = 0; i < (OMAP_REBOOT_REASON_SIZE - 1) && mode[i] != '\0'; i++)
- writeb(mode[i], (u8 *)(OMAP44XX_SAR_RAM_BASE +
- OMAP_REBOOT_REASON_OFFSET + i));
-
- writeb('\0', (u8 *)(OMAP44XX_SAR_RAM_BASE +
- OMAP_REBOOT_REASON_OFFSET + i));
-
- return 0;
-}
diff --git a/arch/arm/mach-omap2/omap4/emif.c b/arch/arm/mach-omap2/omap4/emif.c
deleted file mode 100644
index 5b0d3b5c78a0..000000000000
--- a/arch/arm/mach-omap2/omap4/emif.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * EMIF programming
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh at ti.com>
- */
-
-#include <asm/emif.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/utils.h>
-
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM;
-u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN;
-#endif
-
-#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
- .max_freq = 400000000,
- .RL = 6,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 15,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
-/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
- .max_freq = 200000000,
- .RL = 3,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 20,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
-/*
- * Min tCK values specified by JESD209-2
- * Min tCK specifies the minimum duration of some AC timing parameters in terms
- * of the number of cycles. If the calculated number of cycles based on the
- * absolute time value is less than the min tCK value, min tCK value should
- * be used instead. This typically happens at low frequencies.
- */
-static const struct lpddr2_min_tck min_tck_jedec = {
- .tRL = 3,
- .tRP_AB = 3,
- .tRCD = 3,
- .tWR = 3,
- .tRAS_MIN = 3,
- .tRRD = 2,
- .tWTR = 2,
- .tXP = 2,
- .tRTP = 2,
- .tCKE = 3,
- .tCKESR = 3,
- .tFAW = 8
-};
-
-static const struct lpddr2_ac_timings *jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
- &timings_jedec_200_mhz,
- &timings_jedec_400_mhz
-};
-
-const struct lpddr2_device_timings jedec_default_timings = {
- .ac_timings = jedec_ac_timings,
- .min_tck = &min_tck_jedec
-};
-
-void emif_get_device_timings(u32 emif_nr,
- const struct lpddr2_device_timings **cs0_device_timings,
- const struct lpddr2_device_timings **cs1_device_timings)
-{
- /* Assume Identical devices on EMIF1 & EMIF2 */
- *cs0_device_timings = &jedec_default_timings;
- *cs1_device_timings = &jedec_default_timings;
-}
-#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/mach-omap2/omap4/hw_data.c b/arch/arm/mach-omap2/omap4/hw_data.c
deleted file mode 100644
index a81d76554949..000000000000
--- a/arch/arm/mach-omap2/omap4/hw_data.c
+++ /dev/null
@@ -1,460 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * HW data initialization for OMAP4
- *
- * (C) Copyright 2013
- * Texas Instruments, <www.ti.com>
- *
- * Sricharan R <r.sricharan at ti.com>
- */
-#include <asm/arch/omap.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/omap_common.h>
-#include <asm/arch/clock.h>
-#include <asm/omap_gpio.h>
-#include <asm/io.h>
-
-struct prcm_regs const **prcm =
- (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
-struct dplls const **dplls_data =
- (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
-struct vcores_data const **omap_vcores =
- (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
-struct omap_sys_ctrl_regs const **ctrl =
- (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
-
-/*
- * The M & N values in the following tables are created using the
- * following tool:
- * tools/omap/clocks_get_m_n.c
- * Please use this tool for creating the table for any new frequency.
- */
-
-/*
- * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF
- * OMAP4460 OPP_NOM frequency
- */
-static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
- {175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/*
- * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430)
- * OMAP4430 OPP_TURBO frequency
- * OMAP4470 OPP_NOM frequency
- */
-static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
- {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/*
- * dpll locked at 1200 MHz - MPU clk at 600 MHz
- * OMAP4430 OPP_NOM frequency
- */
-static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
- {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* OMAP4460 OPP_NOM frequency */
-/* OMAP4470 OPP_NOM (Low Power) frequency */
-static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
- {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
- {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
- {619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
- {125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
- {400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
- {800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
- {125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* OMAP4430 ES1 OPP_NOM frequency */
-static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
- {127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
- {762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
- {635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
- {635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
- {381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
- {254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
- {496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* OMAP4430 ES2.X OPP_NOM frequency */
-static const struct dpll_params
- core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
- {200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
- {800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
- {619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
- {125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
- {400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
- {800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
- {125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
- {64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 12 MHz */
- {768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 13 MHz */
- {320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 16.8 MHz */
- {40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 19.2 MHz */
- {384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 26 MHz */
- {256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 27 MHz */
- {20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
- {931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* ABE M & N values with sys_clk as source */
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
-static const struct dpll_params
- abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
- {49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-#else
-/* ABE M & N values with 32K clock as source */
-static const struct dpll_params abe_dpll_params_32k_196608khz = {
- 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
-};
-#endif
-
-static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
- {80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-struct dplls omap4430_dplls_es1 = {
- .mpu = mpu_dpll_params_1200mhz,
- .core = core_dpll_params_es1_1524mhz,
- .per = per_dpll_params_1536mhz,
- .iva = iva_dpll_params_1862mhz,
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
- .abe = abe_dpll_params_sysclk_196608khz,
-#else
- .abe = &abe_dpll_params_32k_196608khz,
-#endif
- .usb = usb_dpll_params_1920mhz,
- .ddr = NULL
-};
-
-struct dplls omap4430_dplls_es20 = {
- .mpu = mpu_dpll_params_1200mhz,
- .core = core_dpll_params_es2_1600mhz_ddr200mhz,
- .per = per_dpll_params_1536mhz,
- .iva = iva_dpll_params_1862mhz,
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
- .abe = abe_dpll_params_sysclk_196608khz,
-#else
- .abe = &abe_dpll_params_32k_196608khz,
-#endif
- .usb = usb_dpll_params_1920mhz,
- .ddr = NULL
-};
-
-struct dplls omap4430_dplls = {
- .mpu = mpu_dpll_params_1200mhz,
- .core = core_dpll_params_1600mhz,
- .per = per_dpll_params_1536mhz,
- .iva = iva_dpll_params_1862mhz,
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
- .abe = abe_dpll_params_sysclk_196608khz,
-#else
- .abe = &abe_dpll_params_32k_196608khz,
-#endif
- .usb = usb_dpll_params_1920mhz,
- .ddr = NULL
-};
-
-struct dplls omap4460_dplls = {
- .mpu = mpu_dpll_params_1400mhz,
- .core = core_dpll_params_1600mhz,
- .per = per_dpll_params_1536mhz,
- .iva = iva_dpll_params_1862mhz,
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
- .abe = abe_dpll_params_sysclk_196608khz,
-#else
- .abe = &abe_dpll_params_32k_196608khz,
-#endif
- .usb = usb_dpll_params_1920mhz,
- .ddr = NULL
-};
-
-struct dplls omap4470_dplls = {
- .mpu = mpu_dpll_params_1600mhz,
- .core = core_dpll_params_1600mhz,
- .per = per_dpll_params_1536mhz,
- .iva = iva_dpll_params_1862mhz,
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
- .abe = abe_dpll_params_sysclk_196608khz,
-#else
- .abe = &abe_dpll_params_32k_196608khz,
-#endif
- .usb = usb_dpll_params_1920mhz,
- .ddr = NULL
-};
-
-struct pmic_data twl6030_4430es1 = {
- .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
- .step = 12660, /* 12.66 mV represented in uV */
- /* The code starts at 1 not 0 */
- .start_code = 1,
- .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
- .pmic_bus_init = sri2c_init,
- .pmic_write = omap_vc_bypass_send_value,
-};
-
-/* twl6030 struct is used for TWL6030 and TWL6032 PMIC */
-struct pmic_data twl6030 = {
- .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
- .step = 12660, /* 12.66 mV represented in uV */
- /* The code starts at 1 not 0 */
- .start_code = 1,
- .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
- .pmic_bus_init = sri2c_init,
- .pmic_write = omap_vc_bypass_send_value,
-};
-
-struct pmic_data tps62361 = {
- .base_offset = TPS62361_BASE_VOLT_MV,
- .step = 10000, /* 10 mV represented in uV */
- .start_code = 0,
- .gpio = TPS62361_VSEL0_GPIO,
- .gpio_en = 1,
- .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
- .pmic_bus_init = sri2c_init,
- .pmic_write = omap_vc_bypass_send_value,
-};
-
-struct vcores_data omap4430_volts_es1 = {
- .mpu.value[OPP_NOM] = 1325,
- .mpu.addr = SMPS_REG_ADDR_VCORE1,
- .mpu.pmic = &twl6030_4430es1,
-
- .core.value[OPP_NOM] = 1200,
- .core.addr = SMPS_REG_ADDR_VCORE3,
- .core.pmic = &twl6030_4430es1,
-
- .mm.value[OPP_NOM] = 1200,
- .mm.addr = SMPS_REG_ADDR_VCORE2,
- .mm.pmic = &twl6030_4430es1,
-};
-
-struct vcores_data omap4430_volts = {
- .mpu.value[OPP_NOM] = 1325,
- .mpu.addr = SMPS_REG_ADDR_VCORE1,
- .mpu.pmic = &twl6030,
-
- .core.value[OPP_NOM] = 1200,
- .core.addr = SMPS_REG_ADDR_VCORE3,
- .core.pmic = &twl6030,
-
- .mm.value[OPP_NOM] = 1200,
- .mm.addr = SMPS_REG_ADDR_VCORE2,
- .mm.pmic = &twl6030,
-};
-
-struct vcores_data omap4460_volts = {
- .mpu.value[OPP_NOM] = 1203,
- .mpu.addr = TPS62361_REG_ADDR_SET1,
- .mpu.pmic = &tps62361,
-
- .core.value[OPP_NOM] = 1200,
- .core.addr = SMPS_REG_ADDR_VCORE1,
- .core.pmic = &twl6030,
-
- .mm.value[OPP_NOM] = 1200,
- .mm.addr = SMPS_REG_ADDR_VCORE2,
- .mm.pmic = &twl6030,
-};
-
-/*
- * Take closest integer part of the mV value corresponding to a TWL6032 SMPS
- * voltage selection code. Aligned with OMAP4470 ES1.0 OCA V.0.7.
- */
-struct vcores_data omap4470_volts = {
- .mpu.value[OPP_NOM] = 1202,
- .mpu.addr = SMPS_REG_ADDR_SMPS1,
- .mpu.pmic = &twl6030,
-
- .core.value[OPP_NOM] = 1126,
- .core.addr = SMPS_REG_ADDR_SMPS2,
- .core.pmic = &twl6030,
-
- .mm.value[OPP_NOM] = 1139,
- .mm.addr = SMPS_REG_ADDR_SMPS5,
- .mm.pmic = &twl6030,
-};
-
-/*
- * Enable essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_basic_clocks(void)
-{
- u32 const clk_domains_essential[] = {
- (*prcm)->cm_l4per_clkstctrl,
- (*prcm)->cm_l3init_clkstctrl,
- (*prcm)->cm_memif_clkstctrl,
- (*prcm)->cm_l4cfg_clkstctrl,
- 0
- };
-
- u32 const clk_modules_hw_auto_essential[] = {
- (*prcm)->cm_l3_gpmc_clkctrl,
- (*prcm)->cm_memif_emif_1_clkctrl,
- (*prcm)->cm_memif_emif_2_clkctrl,
- (*prcm)->cm_l4cfg_l4_cfg_clkctrl,
- (*prcm)->cm_wkup_gpio1_clkctrl,
- (*prcm)->cm_l4per_gpio2_clkctrl,
- (*prcm)->cm_l4per_gpio3_clkctrl,
- (*prcm)->cm_l4per_gpio4_clkctrl,
- (*prcm)->cm_l4per_gpio5_clkctrl,
- (*prcm)->cm_l4per_gpio6_clkctrl,
- 0
- };
-
- u32 const clk_modules_explicit_en_essential[] = {
- (*prcm)->cm_wkup_gptimer1_clkctrl,
- (*prcm)->cm_l3init_hsmmc1_clkctrl,
- (*prcm)->cm_l3init_hsmmc2_clkctrl,
- (*prcm)->cm_l4per_gptimer2_clkctrl,
- (*prcm)->cm_wkup_wdtimer2_clkctrl,
- (*prcm)->cm_l4per_uart3_clkctrl,
- (*prcm)->cm_l4per_i2c1_clkctrl,
- (*prcm)->cm_l4per_i2c2_clkctrl,
- (*prcm)->cm_l4per_i2c3_clkctrl,
- (*prcm)->cm_l4per_i2c4_clkctrl,
- 0
- };
-
- /* Enable optional additional functional clock for GPIO4 */
- setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
- GPIO4_CLKCTRL_OPTFCLKEN_MASK);
-
- /* Enable 96 MHz clock for MMC1 & MMC2 */
- setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_MASK);
- setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_MASK);
-
- /* Select 32KHz clock as the source of GPTIMER1 */
- setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
- GPTIMER1_CLKCTRL_CLKSEL_MASK);
-
- /* Enable optional 48M functional clock for USB PHY */
- setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl,
- USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
-
- /* Enable 32 KHz clock for USB PHY */
- setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
- USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
-
- do_enable_clocks(clk_domains_essential,
- clk_modules_hw_auto_essential,
- clk_modules_explicit_en_essential,
- 1);
-}
-
-void enable_basic_uboot_clocks(void)
-{
- u32 const clk_domains_essential[] = {
- 0
- };
-
- u32 const clk_modules_hw_auto_essential[] = {
- (*prcm)->cm_l3init_hsusbotg_clkctrl,
- (*prcm)->cm_l3init_usbphy_clkctrl,
- (*prcm)->cm_clksel_usb_60mhz,
- (*prcm)->cm_l3init_hsusbtll_clkctrl,
- 0
- };
-
- u32 const clk_modules_explicit_en_essential[] = {
- (*prcm)->cm_l4per_mcspi1_clkctrl,
- (*prcm)->cm_l3init_hsusbhost_clkctrl,
- 0
- };
-
- do_enable_clocks(clk_domains_essential,
- clk_modules_hw_auto_essential,
- clk_modules_explicit_en_essential,
- 1);
-}
-
-void hw_data_init(void)
-{
- u32 omap_rev = omap_revision();
-
- (*prcm) = &omap4_prcm;
-
- switch (omap_rev) {
-
- case OMAP4430_ES1_0:
- *dplls_data = &omap4430_dplls_es1;
- *omap_vcores = &omap4430_volts_es1;
- break;
-
- case OMAP4430_ES2_0:
- *dplls_data = &omap4430_dplls_es20;
- *omap_vcores = &omap4430_volts;
- break;
-
- case OMAP4430_ES2_1:
- case OMAP4430_ES2_2:
- case OMAP4430_ES2_3:
- *dplls_data = &omap4430_dplls;
- *omap_vcores = &omap4430_volts;
- break;
-
- case OMAP4460_ES1_0:
- case OMAP4460_ES1_1:
- *dplls_data = &omap4460_dplls;
- *omap_vcores = &omap4460_volts;
- break;
-
- case OMAP4470_ES1_0:
- *dplls_data = &omap4470_dplls;
- *omap_vcores = &omap4470_volts;
- break;
-
- default:
- printf("\n INVALID OMAP REVISION ");
- }
-
- *ctrl = &omap4_ctrl;
-}
diff --git a/arch/arm/mach-omap2/omap4/hwinit.c b/arch/arm/mach-omap2/omap4/hwinit.c
deleted file mode 100644
index e3e6cc8e5785..000000000000
--- a/arch/arm/mach-omap2/omap4/hwinit.c
+++ /dev/null
@@ -1,186 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * Common functions for OMAP4 based boards
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- * Aneesh V <aneesh at ti.com>
- * Steve Sakoman <steve at sakoman.com>
- */
-#include <palmas.h>
-#include <asm/armv7.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/sizes.h>
-#include <asm/emif.h>
-#include <asm/arch/gpio.h>
-#include <asm/omap_common.h>
-
-u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
-
-static const struct gpio_bank gpio_bank_44xx[6] = {
- { (void *)OMAP44XX_GPIO1_BASE },
- { (void *)OMAP44XX_GPIO2_BASE },
- { (void *)OMAP44XX_GPIO3_BASE },
- { (void *)OMAP44XX_GPIO4_BASE },
- { (void *)OMAP44XX_GPIO5_BASE },
- { (void *)OMAP44XX_GPIO6_BASE },
-};
-
-const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
-
-#ifdef CONFIG_SPL_BUILD
-/*
- * Some tuning of IOs for optimal power and performance
- */
-void do_io_settings(void)
-{
- u32 lpddr2io;
-
- u32 omap4_rev = omap_revision();
-
- if (omap4_rev == OMAP4430_ES1_0)
- lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
- else if (omap4_rev == OMAP4430_ES2_0)
- lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
- else
- lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
-
- /* EMIF1 */
- writel(lpddr2io, (*ctrl)->control_lpddr2io1_0);
- writel(lpddr2io, (*ctrl)->control_lpddr2io1_1);
- /* No pull for GR10 as per hw team's recommendation */
- writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- (*ctrl)->control_lpddr2io1_2);
- writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3);
-
- /* EMIF2 */
- writel(lpddr2io, (*ctrl)->control_lpddr2io2_0);
- writel(lpddr2io, (*ctrl)->control_lpddr2io2_1);
- /* No pull for GR10 as per hw team's recommendation */
- writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- (*ctrl)->control_lpddr2io2_2);
- writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3);
-
- /*
- * Some of these settings (TRIM values) come from eFuse and are
- * in turn programmed in the eFuse at manufacturing time after
- * calibration of the device. Do the software over-ride only if
- * the device is not correctly trimmed
- */
- if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) {
-
- writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- (*ctrl)->control_ldosram_iva_voltage_ctrl);
-
- writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- (*ctrl)->control_ldosram_mpu_voltage_ctrl);
-
- writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- (*ctrl)->control_ldosram_core_voltage_ctrl);
- }
-
- /*
- * Over-ride the register
- * i. unconditionally for all 4430
- * ii. only if un-trimmed for 4460
- */
- if (!readl((*ctrl)->control_efuse_1))
- writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1);
-
- if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2))
- writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2);
-}
-#endif /* CONFIG_SPL_BUILD */
-
-/* dummy fuction for omap4 */
-void config_data_eye_leveling_samples(u32 emif_base)
-{
-}
-
-void init_omap_revision(void)
-{
- /*
- * For some of the ES2/ES1 boards ID_CODE is not reliable:
- * Also, ES1 and ES2 have different ARM revisions
- * So use ARM revision for identification
- */
- unsigned int arm_rev = cortex_rev();
-
- switch (arm_rev) {
- case MIDR_CORTEX_A9_R0P1:
- *omap_si_rev = OMAP4430_ES1_0;
- break;
- case MIDR_CORTEX_A9_R1P2:
- switch (readl(CONTROL_ID_CODE)) {
- case OMAP4_CONTROL_ID_CODE_ES2_0:
- *omap_si_rev = OMAP4430_ES2_0;
- break;
- case OMAP4_CONTROL_ID_CODE_ES2_1:
- *omap_si_rev = OMAP4430_ES2_1;
- break;
- case OMAP4_CONTROL_ID_CODE_ES2_2:
- *omap_si_rev = OMAP4430_ES2_2;
- break;
- default:
- *omap_si_rev = OMAP4430_ES2_0;
- break;
- }
- break;
- case MIDR_CORTEX_A9_R1P3:
- *omap_si_rev = OMAP4430_ES2_3;
- break;
- case MIDR_CORTEX_A9_R2P10:
- switch (readl(CONTROL_ID_CODE)) {
- case OMAP4470_CONTROL_ID_CODE_ES1_0:
- *omap_si_rev = OMAP4470_ES1_0;
- break;
- case OMAP4460_CONTROL_ID_CODE_ES1_1:
- *omap_si_rev = OMAP4460_ES1_1;
- break;
- case OMAP4460_CONTROL_ID_CODE_ES1_0:
- default:
- *omap_si_rev = OMAP4460_ES1_0;
- break;
- }
- break;
- default:
- *omap_si_rev = OMAP4430_SILICON_ID_INVALID;
- break;
- }
-}
-
-void omap_die_id(unsigned int *die_id)
-{
- die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0);
- die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1);
- die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2);
- die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3);
-}
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-void v7_outer_cache_enable(void)
-{
- omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 1);
-}
-
-void v7_outer_cache_disable(void)
-{
- omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 0);
-}
-#endif /* !CONFIG_SYS_L2CACHE_OFF */
-
-void vmmc_pbias_config(uint voltage)
-{
- u32 value = 0;
-
- value = readl((*ctrl)->control_pbiaslite);
- value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
- writel(value, (*ctrl)->control_pbiaslite);
- value = readl((*ctrl)->control_pbiaslite);
- value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
- writel(value, (*ctrl)->control_pbiaslite);
-}
diff --git a/arch/arm/mach-omap2/omap4/prcm-regs.c b/arch/arm/mach-omap2/omap4/prcm-regs.c
deleted file mode 100644
index eaf98b389149..000000000000
--- a/arch/arm/mach-omap2/omap4/prcm-regs.c
+++ /dev/null
@@ -1,306 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * HW regs data for OMAP4
- *
- * (C) Copyright 2013
- * Texas Instruments, <www.ti.com>
- *
- * Sricharan R <r.sricharan at ti.com>
- */
-
-#include <asm/omap_common.h>
-
-struct prcm_regs const omap4_prcm = {
- /* cm1.ckgen */
- .cm_clksel_core = 0x4a004100,
- .cm_clksel_abe = 0x4a004108,
- .cm_dll_ctrl = 0x4a004110,
- .cm_clkmode_dpll_core = 0x4a004120,
- .cm_idlest_dpll_core = 0x4a004124,
- .cm_autoidle_dpll_core = 0x4a004128,
- .cm_clksel_dpll_core = 0x4a00412c,
- .cm_div_m2_dpll_core = 0x4a004130,
- .cm_div_m3_dpll_core = 0x4a004134,
- .cm_div_m4_dpll_core = 0x4a004138,
- .cm_div_m5_dpll_core = 0x4a00413c,
- .cm_div_m6_dpll_core = 0x4a004140,
- .cm_div_m7_dpll_core = 0x4a004144,
- .cm_ssc_deltamstep_dpll_core = 0x4a004148,
- .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
- .cm_emu_override_dpll_core = 0x4a004150,
- .cm_clkmode_dpll_mpu = 0x4a004160,
- .cm_idlest_dpll_mpu = 0x4a004164,
- .cm_autoidle_dpll_mpu = 0x4a004168,
- .cm_clksel_dpll_mpu = 0x4a00416c,
- .cm_div_m2_dpll_mpu = 0x4a004170,
- .cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
- .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
- .cm_bypclk_dpll_mpu = 0x4a00419c,
- .cm_clkmode_dpll_iva = 0x4a0041a0,
- .cm_idlest_dpll_iva = 0x4a0041a4,
- .cm_autoidle_dpll_iva = 0x4a0041a8,
- .cm_clksel_dpll_iva = 0x4a0041ac,
- .cm_div_m4_dpll_iva = 0x4a0041b8,
- .cm_div_m5_dpll_iva = 0x4a0041bc,
- .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
- .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
- .cm_bypclk_dpll_iva = 0x4a0041dc,
- .cm_clkmode_dpll_abe = 0x4a0041e0,
- .cm_idlest_dpll_abe = 0x4a0041e4,
- .cm_autoidle_dpll_abe = 0x4a0041e8,
- .cm_clksel_dpll_abe = 0x4a0041ec,
- .cm_div_m2_dpll_abe = 0x4a0041f0,
- .cm_div_m3_dpll_abe = 0x4a0041f4,
- .cm_ssc_deltamstep_dpll_abe = 0x4a004208,
- .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
- .cm_clkmode_dpll_ddrphy = 0x4a004220,
- .cm_idlest_dpll_ddrphy = 0x4a004224,
- .cm_autoidle_dpll_ddrphy = 0x4a004228,
- .cm_clksel_dpll_ddrphy = 0x4a00422c,
- .cm_div_m2_dpll_ddrphy = 0x4a004230,
- .cm_div_m4_dpll_ddrphy = 0x4a004238,
- .cm_div_m5_dpll_ddrphy = 0x4a00423c,
- .cm_div_m6_dpll_ddrphy = 0x4a004240,
- .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
- .cm_shadow_freq_config1 = 0x4a004260,
- .cm_mpu_mpu_clkctrl = 0x4a004320,
-
- /* cm1.dsp */
- .cm_dsp_clkstctrl = 0x4a004400,
- .cm_dsp_dsp_clkctrl = 0x4a004420,
-
- /* cm1.abe */
- .cm1_abe_clkstctrl = 0x4a004500,
- .cm1_abe_l4abe_clkctrl = 0x4a004520,
- .cm1_abe_aess_clkctrl = 0x4a004528,
- .cm1_abe_pdm_clkctrl = 0x4a004530,
- .cm1_abe_dmic_clkctrl = 0x4a004538,
- .cm1_abe_mcasp_clkctrl = 0x4a004540,
- .cm1_abe_mcbsp1_clkctrl = 0x4a004548,
- .cm1_abe_mcbsp2_clkctrl = 0x4a004550,
- .cm1_abe_mcbsp3_clkctrl = 0x4a004558,
- .cm1_abe_slimbus_clkctrl = 0x4a004560,
- .cm1_abe_timer5_clkctrl = 0x4a004568,
- .cm1_abe_timer6_clkctrl = 0x4a004570,
- .cm1_abe_timer7_clkctrl = 0x4a004578,
- .cm1_abe_timer8_clkctrl = 0x4a004580,
- .cm1_abe_wdt3_clkctrl = 0x4a004588,
-
- /* cm2.ckgen */
- .cm_clksel_mpu_m3_iss_root = 0x4a008100,
- .cm_clksel_usb_60mhz = 0x4a008104,
- .cm_scale_fclk = 0x4a008108,
- .cm_core_dvfs_perf1 = 0x4a008110,
- .cm_core_dvfs_perf2 = 0x4a008114,
- .cm_core_dvfs_perf3 = 0x4a008118,
- .cm_core_dvfs_perf4 = 0x4a00811c,
- .cm_core_dvfs_current = 0x4a008124,
- .cm_iva_dvfs_perf_tesla = 0x4a008128,
- .cm_iva_dvfs_perf_ivahd = 0x4a00812c,
- .cm_iva_dvfs_perf_abe = 0x4a008130,
- .cm_iva_dvfs_current = 0x4a008138,
- .cm_clkmode_dpll_per = 0x4a008140,
- .cm_idlest_dpll_per = 0x4a008144,
- .cm_autoidle_dpll_per = 0x4a008148,
- .cm_clksel_dpll_per = 0x4a00814c,
- .cm_div_m2_dpll_per = 0x4a008150,
- .cm_div_m3_dpll_per = 0x4a008154,
- .cm_div_m4_dpll_per = 0x4a008158,
- .cm_div_m5_dpll_per = 0x4a00815c,
- .cm_div_m6_dpll_per = 0x4a008160,
- .cm_div_m7_dpll_per = 0x4a008164,
- .cm_ssc_deltamstep_dpll_per = 0x4a008168,
- .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
- .cm_emu_override_dpll_per = 0x4a008170,
- .cm_clkmode_dpll_usb = 0x4a008180,
- .cm_idlest_dpll_usb = 0x4a008184,
- .cm_autoidle_dpll_usb = 0x4a008188,
- .cm_clksel_dpll_usb = 0x4a00818c,
- .cm_div_m2_dpll_usb = 0x4a008190,
- .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
- .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
- .cm_clkdcoldo_dpll_usb = 0x4a0081b4,
- .cm_clkmode_dpll_unipro = 0x4a0081c0,
- .cm_idlest_dpll_unipro = 0x4a0081c4,
- .cm_autoidle_dpll_unipro = 0x4a0081c8,
- .cm_clksel_dpll_unipro = 0x4a0081cc,
- .cm_div_m2_dpll_unipro = 0x4a0081d0,
- .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
- .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
- .cm_coreaon_usb_phy1_core_clkctrl = 0x4a008640,
-
- /* cm2.core */
- .cm_l3_1_clkstctrl = 0x4a008700,
- .cm_l3_1_dynamicdep = 0x4a008708,
- .cm_l3_1_l3_1_clkctrl = 0x4a008720,
- .cm_l3_2_clkstctrl = 0x4a008800,
- .cm_l3_2_dynamicdep = 0x4a008808,
- .cm_l3_2_l3_2_clkctrl = 0x4a008820,
- .cm_l3_gpmc_clkctrl = 0x4a008828,
- .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
- .cm_mpu_m3_clkstctrl = 0x4a008900,
- .cm_mpu_m3_staticdep = 0x4a008904,
- .cm_mpu_m3_dynamicdep = 0x4a008908,
- .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
- .cm_sdma_clkstctrl = 0x4a008a00,
- .cm_sdma_staticdep = 0x4a008a04,
- .cm_sdma_dynamicdep = 0x4a008a08,
- .cm_sdma_sdma_clkctrl = 0x4a008a20,
- .cm_memif_clkstctrl = 0x4a008b00,
- .cm_memif_dmm_clkctrl = 0x4a008b20,
- .cm_memif_emif_fw_clkctrl = 0x4a008b28,
- .cm_memif_emif_1_clkctrl = 0x4a008b30,
- .cm_memif_emif_2_clkctrl = 0x4a008b38,
- .cm_memif_dll_clkctrl = 0x4a008b40,
- .cm_memif_emif_h1_clkctrl = 0x4a008b50,
- .cm_memif_emif_h2_clkctrl = 0x4a008b58,
- .cm_memif_dll_h_clkctrl = 0x4a008b60,
- .cm_c2c_clkstctrl = 0x4a008c00,
- .cm_c2c_staticdep = 0x4a008c04,
- .cm_c2c_dynamicdep = 0x4a008c08,
- .cm_c2c_sad2d_clkctrl = 0x4a008c20,
- .cm_c2c_modem_icr_clkctrl = 0x4a008c28,
- .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
- .cm_l4cfg_clkstctrl = 0x4a008d00,
- .cm_l4cfg_dynamicdep = 0x4a008d08,
- .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
- .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
- .cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
- .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
- .cm_l3instr_clkstctrl = 0x4a008e00,
- .cm_l3instr_l3_3_clkctrl = 0x4a008e20,
- .cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
- .cm_l3instr_intrconn_wp1_clkct = 0x4a008e40,
- .cm_ivahd_clkstctrl = 0x4a008f00,
-
- /* cm2.ivahd */
- .cm_ivahd_ivahd_clkctrl = 0x4a008f20,
- .cm_ivahd_sl2_clkctrl = 0x4a008f28,
-
- /* cm2.cam */
- .cm_cam_clkstctrl = 0x4a009000,
- .cm_cam_iss_clkctrl = 0x4a009020,
- .cm_cam_fdif_clkctrl = 0x4a009028,
-
- /* cm2.dss */
- .cm_dss_clkstctrl = 0x4a009100,
- .cm_dss_dss_clkctrl = 0x4a009120,
-
- /* cm2.sgx */
- .cm_sgx_clkstctrl = 0x4a009200,
- .cm_sgx_sgx_clkctrl = 0x4a009220,
-
- /* cm2.l3init */
- .cm_l3init_clkstctrl = 0x4a009300,
- .cm_l3init_hsmmc1_clkctrl = 0x4a009328,
- .cm_l3init_hsmmc2_clkctrl = 0x4a009330,
- .cm_l3init_hsi_clkctrl = 0x4a009338,
- .cm_l3init_hsusbhost_clkctrl = 0x4a009358,
- .cm_l3init_hsusbotg_clkctrl = 0x4a009360,
- .cm_l3init_hsusbtll_clkctrl = 0x4a009368,
- .cm_l3init_p1500_clkctrl = 0x4a009378,
- .cm_l3init_fsusb_clkctrl = 0x4a0093d0,
- .cm_l3init_usbphy_clkctrl = 0x4a0093e0,
-
- /* cm2.l4per */
- .cm_l4per_clkstctrl = 0x4a009400,
- .cm_l4per_dynamicdep = 0x4a009408,
- .cm_l4per_adc_clkctrl = 0x4a009420,
- .cm_l4per_gptimer10_clkctrl = 0x4a009428,
- .cm_l4per_gptimer11_clkctrl = 0x4a009430,
- .cm_l4per_gptimer2_clkctrl = 0x4a009438,
- .cm_l4per_gptimer3_clkctrl = 0x4a009440,
- .cm_l4per_gptimer4_clkctrl = 0x4a009448,
- .cm_l4per_gptimer9_clkctrl = 0x4a009450,
- .cm_l4per_elm_clkctrl = 0x4a009458,
- .cm_l4per_gpio2_clkctrl = 0x4a009460,
- .cm_l4per_gpio3_clkctrl = 0x4a009468,
- .cm_l4per_gpio4_clkctrl = 0x4a009470,
- .cm_l4per_gpio5_clkctrl = 0x4a009478,
- .cm_l4per_gpio6_clkctrl = 0x4a009480,
- .cm_l4per_hdq1w_clkctrl = 0x4a009488,
- .cm_l4per_hecc1_clkctrl = 0x4a009490,
- .cm_l4per_hecc2_clkctrl = 0x4a009498,
- .cm_l4per_i2c1_clkctrl = 0x4a0094a0,
- .cm_l4per_i2c2_clkctrl = 0x4a0094a8,
- .cm_l4per_i2c3_clkctrl = 0x4a0094b0,
- .cm_l4per_i2c4_clkctrl = 0x4a0094b8,
- .cm_l4per_l4per_clkctrl = 0x4a0094c0,
- .cm_l4per_mcasp2_clkctrl = 0x4a0094d0,
- .cm_l4per_mcasp3_clkctrl = 0x4a0094d8,
- .cm_l4per_mcbsp4_clkctrl = 0x4a0094e0,
- .cm_l4per_mgate_clkctrl = 0x4a0094e8,
- .cm_l4per_mcspi1_clkctrl = 0x4a0094f0,
- .cm_l4per_mcspi2_clkctrl = 0x4a0094f8,
- .cm_l4per_mcspi3_clkctrl = 0x4a009500,
- .cm_l4per_mcspi4_clkctrl = 0x4a009508,
- .cm_l4per_mmcsd3_clkctrl = 0x4a009520,
- .cm_l4per_mmcsd4_clkctrl = 0x4a009528,
- .cm_l4per_msprohg_clkctrl = 0x4a009530,
- .cm_l4per_slimbus2_clkctrl = 0x4a009538,
- .cm_l4per_uart1_clkctrl = 0x4a009540,
- .cm_l4per_uart2_clkctrl = 0x4a009548,
- .cm_l4per_uart3_clkctrl = 0x4a009550,
- .cm_l4per_uart4_clkctrl = 0x4a009558,
- .cm_l4per_mmcsd5_clkctrl = 0x4a009560,
- .cm_l4per_i2c5_clkctrl = 0x4a009568,
- .cm_l4sec_clkstctrl = 0x4a009580,
- .cm_l4sec_staticdep = 0x4a009584,
- .cm_l4sec_dynamicdep = 0x4a009588,
- .cm_l4sec_aes1_clkctrl = 0x4a0095a0,
- .cm_l4sec_aes2_clkctrl = 0x4a0095a8,
- .cm_l4sec_des3des_clkctrl = 0x4a0095b0,
- .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8,
- .cm_l4sec_rng_clkctrl = 0x4a0095c0,
- .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8,
- .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8,
-
- /* l4 wkup regs */
- .cm_abe_pll_ref_clksel = 0x4a30610c,
- .cm_sys_clksel = 0x4a306110,
- .cm_wkup_clkstctrl = 0x4a307800,
- .cm_wkup_l4wkup_clkctrl = 0x4a307820,
- .cm_wkup_wdtimer1_clkctrl = 0x4a307828,
- .cm_wkup_wdtimer2_clkctrl = 0x4a307830,
- .cm_wkup_gpio1_clkctrl = 0x4a307838,
- .cm_wkup_gptimer1_clkctrl = 0x4a307840,
- .cm_wkup_gptimer12_clkctrl = 0x4a307848,
- .cm_wkup_synctimer_clkctrl = 0x4a307850,
- .cm_wkup_usim_clkctrl = 0x4a307858,
- .cm_wkup_sarram_clkctrl = 0x4a307860,
- .cm_wkup_keyboard_clkctrl = 0x4a307878,
- .cm_wkup_rtc_clkctrl = 0x4a307880,
- .cm_wkup_bandgap_clkctrl = 0x4a307888,
- .prm_vc_val_bypass = 0x4a307ba0,
- .prm_vc_cfg_channel = 0x4a307ba4,
- .prm_vc_cfg_i2c_mode = 0x4a307ba8,
- .prm_vc_cfg_i2c_clk = 0x4a307bac,
-};
-
-struct omap_sys_ctrl_regs const omap4_ctrl = {
- .control_status = 0x4A0022C4,
- .control_std_fuse_die_id_0 = 0x4A002200,
- .control_std_fuse_die_id_1 = 0x4A002208,
- .control_std_fuse_die_id_2 = 0x4A00220C,
- .control_std_fuse_die_id_3 = 0x4A002210,
- .control_std_fuse_opp_bgap = 0x4a002260,
- .control_status = 0x4a0022c4,
- .control_ldosram_iva_voltage_ctrl = 0x4A002320,
- .control_ldosram_mpu_voltage_ctrl = 0x4A002324,
- .control_ldosram_core_voltage_ctrl = 0x4A002328,
- .control_usbotghs_ctrl = 0x4A00233C,
- .control_padconf_core_base = 0x4A100000,
- .control_pbiaslite = 0x4A100600,
- .control_lpddr2io1_0 = 0x4A100638,
- .control_lpddr2io1_1 = 0x4A10063C,
- .control_lpddr2io1_2 = 0x4A100640,
- .control_lpddr2io1_3 = 0x4A100644,
- .control_lpddr2io2_0 = 0x4A100648,
- .control_lpddr2io2_1 = 0x4A10064C,
- .control_lpddr2io2_2 = 0x4A100650,
- .control_lpddr2io2_3 = 0x4A100654,
- .control_efuse_1 = 0x4A100700,
- .control_efuse_2 = 0x4A100704,
- .control_padconf_wkup_base = 0x4A31E000,
-};
diff --git a/arch/arm/mach-omap2/omap4/sdram_elpida.c b/arch/arm/mach-omap2/omap4/sdram_elpida.c
deleted file mode 100644
index a29a264016ed..000000000000
--- a/arch/arm/mach-omap2/omap4/sdram_elpida.c
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Timing and Organization details of the Elpida parts used in OMAP4
- * SDPs and Panda
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh at ti.com>
- */
-
-#include <asm/emif.h>
-#include <asm/arch/sys_proto.h>
-
-/*
- * This file provides details of the LPDDR2 SDRAM parts used on OMAP4430
- * SDP and Panda. Since the parts used and geometry are identical for
- * SDP and Panda for a given OMAP4 revision, this information is kept
- * here instead of being in board directory. However the key functions
- * exported are weakly linked so that they can be over-ridden in the board
- * directory if there is a OMAP4 board in the future that uses a different
- * memory device or geometry.
- *
- * For any new board with different memory devices over-ride one or more
- * of the following functions as per the CONFIG flags you intend to enable:
- * - emif_get_reg_dump()
- * - emif_get_dmm_regs()
- * - emif_get_device_details()
- * - emif_get_device_timings()
- */
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-
-const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
- .sdram_config_init = 0x80000eb9,
- .sdram_config = 0x80001ab9,
- .ref_ctrl = 0x0000030c,
- .sdram_tim1 = 0x08648311,
- .sdram_tim2 = 0x101b06ca,
- .sdram_tim3 = 0x0048a19f,
- .read_idle_ctrl = 0x000501ff,
- .zq_config = 0x500b3214,
- .temp_alert_config = 0xd8016893,
- .emif_ddr_phy_ctlr_1_init = 0x049ffff5,
- .emif_ddr_phy_ctlr_1 = 0x049ff808
-};
-
-const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
- .sdram_config_init = 0x80000eb1,
- .sdram_config = 0x80001ab1,
- .ref_ctrl = 0x000005cd,
- .sdram_tim1 = 0x10cb0622,
- .sdram_tim2 = 0x20350d52,
- .sdram_tim3 = 0x00b1431f,
- .read_idle_ctrl = 0x000501ff,
- .zq_config = 0x500b3214,
- .temp_alert_config = 0x58016893,
- .emif_ddr_phy_ctlr_1_init = 0x049ffff5,
- .emif_ddr_phy_ctlr_1 = 0x049ff418
-};
-
-const struct emif_regs emif_regs_elpida_400_mhz_1cs = {
- .sdram_config_init = 0x80800eb2,
- .sdram_config = 0x80801ab2,
- .ref_ctrl = 0x00000618,
- .sdram_tim1 = 0x10eb0662,
- .sdram_tim2 = 0x20370dd2,
- .sdram_tim3 = 0x00b1c33f,
- .read_idle_ctrl = 0x000501ff,
- .zq_config = 0x500b3215,
- .temp_alert_config = 0x58016893,
- .emif_ddr_phy_ctlr_1_init = 0x049ffff5,
- .emif_ddr_phy_ctlr_1 = 0x049ff418
-};
-
-const struct emif_regs emif_regs_elpida_400_mhz_2cs = {
- .sdram_config_init = 0x80000eb9,
- .sdram_config = 0x80001ab9,
- .ref_ctrl = 0x00000618,
- .sdram_tim1 = 0x10eb0662,
- .sdram_tim2 = 0x20370dd2,
- .sdram_tim3 = 0x00b1c33f,
- .read_idle_ctrl = 0x000501ff,
- .zq_config = 0xd00b3214,
- .temp_alert_config = 0xd8016893,
- .emif_ddr_phy_ctlr_1_init = 0x049ffff5,
- .emif_ddr_phy_ctlr_1 = 0x049ff418
-};
-
-const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
- .dmm_lisa_map_0 = 0xFF020100,
- .dmm_lisa_map_1 = 0,
- .dmm_lisa_map_2 = 0,
- .dmm_lisa_map_3 = 0x80540300,
- .is_ma_present = 0x0
-};
-
-const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
- .dmm_lisa_map_0 = 0xFF020100,
- .dmm_lisa_map_1 = 0,
- .dmm_lisa_map_2 = 0,
- .dmm_lisa_map_3 = 0x80640300,
- .is_ma_present = 0x0
-};
-
-const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = {
- .dmm_lisa_map_0 = 0xFF020100,
- .dmm_lisa_map_1 = 0,
- .dmm_lisa_map_2 = 0,
- .dmm_lisa_map_3 = 0x80640300,
- .is_ma_present = 0x1
-};
-
-static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
-{
- u32 omap4_rev = omap_revision();
-
- /* Same devices and geometry on both EMIFs */
- if (omap4_rev == OMAP4430_ES1_0)
- *regs = &emif_regs_elpida_380_mhz_1cs;
- else if (omap4_rev == OMAP4430_ES2_0)
- *regs = &emif_regs_elpida_200_mhz_2cs;
- else if (omap4_rev < OMAP4470_ES1_0)
- *regs = &emif_regs_elpida_400_mhz_2cs;
- else
- *regs = &emif_regs_elpida_400_mhz_1cs;
-}
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
- __attribute__((weak, alias("emif_get_reg_dump_sdp")));
-
-static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
- **dmm_lisa_regs)
-{
- u32 omap_rev = omap_revision();
-
- if (omap_rev == OMAP4430_ES1_0)
- *dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
- else if (omap_rev < OMAP4460_ES1_0)
- *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
- else
- *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
-}
-
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
- __attribute__((weak, alias("emif_get_dmm_regs_sdp")));
-
-#else
-
-const struct lpddr2_device_details elpida_2G_S4_details = {
- .type = LPDDR2_TYPE_S4,
- .density = LPDDR2_DENSITY_2Gb,
- .io_width = LPDDR2_IO_WIDTH_32,
- .manufacturer = LPDDR2_MANUFACTURER_ELPIDA
-};
-
-const struct lpddr2_device_details elpida_4G_S4_details = {
- .type = LPDDR2_TYPE_S4,
- .density = LPDDR2_DENSITY_4Gb,
- .io_width = LPDDR2_IO_WIDTH_32,
- .manufacturer = LPDDR2_MANUFACTURER_ELPIDA
-};
-
-struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs,
- struct lpddr2_device_details *lpddr2_dev_details)
-{
- u32 omap_rev = omap_revision();
-
- /* EMIF1 & EMIF2 have identical configuration */
- if (((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0))
- && (cs == CS1)) {
- /* Nothing connected on CS1 for 4430/4470 ES1.0 */
- return NULL;
- } else if (omap_rev < OMAP4470_ES1_0) {
- /* In all other 4430/4460 cases Elpida 2G device */
- *lpddr2_dev_details = elpida_2G_S4_details;
- } else {
- /* 4470: 4G device */
- *lpddr2_dev_details = elpida_4G_S4_details;
- }
- return lpddr2_dev_details;
-}
-
-struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
- struct lpddr2_device_details *lpddr2_dev_details)
- __attribute__((weak, alias("emif_get_device_details_sdp")));
-
-#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
-
-#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-static const struct lpddr2_ac_timings timings_elpida_400_mhz = {
- .max_freq = 400000000,
- .RL = 6,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 15,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
-static const struct lpddr2_ac_timings timings_elpida_333_mhz = {
- .max_freq = 333000000,
- .RL = 5,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 15,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
-static const struct lpddr2_ac_timings timings_elpida_200_mhz = {
- .max_freq = 200000000,
- .RL = 3,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 20,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
-static const struct lpddr2_min_tck min_tck_elpida = {
- .tRL = 3,
- .tRP_AB = 3,
- .tRCD = 3,
- .tWR = 3,
- .tRAS_MIN = 3,
- .tRRD = 2,
- .tWTR = 2,
- .tXP = 2,
- .tRTP = 2,
- .tCKE = 3,
- .tCKESR = 3,
- .tFAW = 8
-};
-
-static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
- &timings_elpida_200_mhz,
- &timings_elpida_333_mhz,
- &timings_elpida_400_mhz
-};
-
-const struct lpddr2_device_timings elpida_2G_S4_timings = {
- .ac_timings = elpida_ac_timings,
- .min_tck = &min_tck_elpida,
-};
-
-void emif_get_device_timings_sdp(u32 emif_nr,
- const struct lpddr2_device_timings **cs0_device_timings,
- const struct lpddr2_device_timings **cs1_device_timings)
-{
- u32 omap_rev = omap_revision();
-
- /* Identical devices on EMIF1 & EMIF2 */
- *cs0_device_timings = &elpida_2G_S4_timings;
-
- if ((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0))
- *cs1_device_timings = NULL;
- else
- *cs1_device_timings = &elpida_2G_S4_timings;
-}
-
-void emif_get_device_timings(u32 emif_nr,
- const struct lpddr2_device_timings **cs0_device_timings,
- const struct lpddr2_device_timings **cs1_device_timings)
- __attribute__((weak, alias("emif_get_device_timings_sdp")));
-
-#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
-
-const struct lpddr2_mr_regs mr_regs = {
- .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3,
- .mr2 = 0x4,
- .mr3 = -1,
- .mr10 = MR10_ZQ_ZQINIT,
- .mr16 = MR16_REF_FULL_ARRAY
-};
-
-void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
-{
- *regs = &mr_regs;
-}
-
-__weak const struct read_write_regs *get_bug_regs(u32 *iterations)
-{
- return 0;
-}
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index af43b5f5d3c9..6f56ca911c1e 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -500,7 +500,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
ARCH_MX6 || ARCH_MX7 || \
ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \
ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \
- OMAP44XX || OMAP54XX || AM33XX || AM43XX || \
+ OMAP54XX || AM33XX || AM43XX || \
TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
select SPL_LOAD_BLOCK if SPL_MMC
select SPL_SYS_MMCSD_RAW_MODE if SPL_MMC
@@ -517,7 +517,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
default 0x100 if ARCH_UNIPHIER
default 0x0 if ARCH_MVEBU
default 0x200 if ARCH_SOCFPGA || ARCH_AT91
- default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
+ default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \
OMAP54XX || AM33XX || AM43XX || ARCH_K3
default 0x4000 if ARCH_ROCKCHIP
default 0x822 if TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 34b02114dc69..cba7f848942f 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -771,7 +771,7 @@ config SYS_I2C_BUS_MAX
int "Max I2C busses"
depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA
default 3 if OMAP34XX || AM33XX || AM43XX
- default 4 if ARCH_SOCFPGA || OMAP44XX
+ default 4 if ARCH_SOCFPGA
default 5 if OMAP54XX
help
Define the maximum number of available I2C buses.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 8b13a0821ee0..982e84dc3bcc 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -406,7 +406,7 @@ config MMC_OMAP36XX_PINS
config HSMMC2_8BIT
bool "Enable 8-bit interface for eMMC (interface #2)"
- depends on MMC_OMAP_HS && (OMAP44XX || OMAP54XX || DRA7XX || AM33XX || \
+ depends on MMC_OMAP_HS && (OMAP54XX || DRA7XX || AM33XX || \
AM43XX || ARCH_KEYSTONE)
config SH_MMCIF
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 2b7f9fc9a205..8e51453d2aee 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -30,7 +30,7 @@
#include <mmc.h>
#include <part.h>
#include <i2c.h>
-#if defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX)
+#if defined(CONFIG_OMAP54XX)
#include <palmas.h>
#endif
#include <asm/cache.h>
@@ -270,8 +270,7 @@ static unsigned char mmc_board_init(struct mmc *mmc)
&prcm_base->iclken1_core);
#endif
-#if (defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX)) &&\
- !CONFIG_IS_ENABLED(DM_REGULATOR)
+#if defined(CONFIG_OMAP54XX) && !CONFIG_IS_ENABLED(DM_REGULATOR)
/* PBIAS config needed for MMC1 only */
if (mmc_get_blk_desc(mmc)->devnum == 0)
vmmc_pbias_config(LDO_VOLT_3V3);
@@ -541,8 +540,7 @@ static int omap_hsmmc_set_signal_voltage(struct mmc *mmc)
#if CONFIG_IS_ENABLED(DM_REGULATOR)
return omap_hsmmc_set_io_regulator(mmc, mv);
-#elif (defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX)) && \
- defined(CONFIG_PALMAS_POWER)
+#elif defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER)
if (mmc_get_blk_desc(mmc)->devnum == 0)
vmmc_pbias_config(palmas_ldo_volt);
return 0;
@@ -905,8 +903,7 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit)
* 3. Wait until the SRC (SRD) bit returns to 0x0
* (reset procedure is completed).
*/
-#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
- defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
+#if defined(CONFIG_OMAP54XX) || defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
if (!(readl(&mmc_base->sysctl) & bit)) {
start = get_timer(0);
while (!(readl(&mmc_base->sysctl) & bit)) {
@@ -1556,7 +1553,7 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
#ifdef OMAP_HSMMC2_BASE
case 1:
priv->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
-#if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
+#if (defined(CONFIG_OMAP54XX) || \
defined(CONFIG_DRA7XX) || defined(CONFIG_AM33XX) || \
defined(CONFIG_AM43XX) || defined(CONFIG_ARCH_KEYSTONE)) && \
defined(CONFIG_HSMMC2_8BIT)
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 33b8bc1214d2..cc1c12455baf 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -434,10 +434,6 @@ config TWL4030_POWER
The TWL4030 in a combination audio CODEC/power management with
GPIO and it is commonly used with the OMAP3 family of processors
-config TWL6030_POWER
- depends on OMAP44XX
- bool "Enable driver for TI TWL6030 power management chip"
-
config POWER_MT6323
bool "Poweroff driver for mediatek mt6323"
select CMD_POWEROFF
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index c7ee4595fc8f..61363ca699e1 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
obj-$(CONFIG_SY8106A_POWER) += sy8106a.o
obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
obj-$(CONFIG_TWL4030_POWER) += twl4030.o
-obj-$(CONFIG_TWL6030_POWER) += twl6030.o
obj-$(CONFIG_PALMAS_POWER) += palmas.o
obj-$(CONFIG_$(SPL_TPL_)POWER_LEGACY) += power_core.o
obj-$(CONFIG_DIALOG_POWER) += power_dialog.o
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
deleted file mode 100644
index 39c05f9b7d37..000000000000
--- a/drivers/power/twl6030.c
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- */
-#include <config.h>
-#include <linux/delay.h>
-#include <linux/printk.h>
-
-#include <twl6030.h>
-
-static struct twl6030_data *twl;
-
-static struct twl6030_data twl6030_info = {
- .chip_type = chip_TWL6030,
- .adc_rbase = GPCH0_LSB,
- .adc_ctrl = CTRL_P2,
- .adc_enable = CTRL_P2_SP2,
- .vbat_mult = TWL6030_VBAT_MULT,
- .vbat_shift = TWL6030_VBAT_SHIFT,
-};
-
-static struct twl6030_data twl6032_info = {
- .chip_type = chip_TWL6032,
- .adc_rbase = TWL6032_GPCH0_LSB,
- .adc_ctrl = TWL6032_CTRL_P1,
- .adc_enable = CTRL_P1_SP1,
- .vbat_mult = TWL6032_VBAT_MULT,
- .vbat_shift = TWL6032_VBAT_SHIFT,
-};
-
-
-static int twl6030_gpadc_read_channel(u8 channel_no)
-{
- u8 lsb = 0;
- u8 msb = 0;
- int ret = 0;
-
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- twl->adc_rbase + channel_no * 2, &lsb);
- if (ret)
- return ret;
-
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- twl->adc_rbase + 1 + channel_no * 2, &msb);
- if (ret)
- return ret;
-
- return (msb << 8) | lsb;
-}
-
-static int twl6030_gpadc_sw2_trigger(void)
-{
- u8 val;
- int ret = 0;
-
- ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
- twl->adc_ctrl, twl->adc_enable);
- if (ret)
- return ret;
-
- /* Waiting until the SW1 conversion ends*/
- val = CTRL_P2_BUSY;
-
- while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- twl->adc_ctrl, &val);
- if (ret)
- return ret;
- udelay(1000);
- }
-
- return 0;
-}
-
-void twl6030_power_off(void)
-{
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_PHOENIX_DEV_ON,
- TWL6030_PHOENIX_APP_DEVOFF | TWL6030_PHOENIX_CON_DEVOFF |
- TWL6030_PHOENIX_MOD_DEVOFF);
-}
-
-void twl6030_stop_usb_charging(void)
-{
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0);
-
- return;
-}
-
-void twl6030_start_usb_charging(void)
-{
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
- CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
- CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
- CONTROLLER_INT_MASK, MBAT_TEMP);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
- CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
- CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
- CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM);
- /* Enable USB charging */
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
- CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER);
- return;
-}
-
-int twl6030_get_battery_current(void)
-{
- int battery_current = 0;
- u8 msb = 0;
- u8 lsb = 0;
-
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb);
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb);
- battery_current = ((msb << 8) | lsb);
-
- /* convert 10 bit signed number to 16 bit signed number */
- if (battery_current >= 0x2000)
- battery_current = (battery_current - 0x4000);
-
- battery_current = battery_current * 3000 / 4096;
- printf("Battery Current: %d mA\n", battery_current);
-
- return battery_current;
-}
-
-int twl6030_get_battery_voltage(void)
-{
- int battery_volt = 0;
- int ret = 0;
- u8 vbatch;
-
- if (twl->chip_type == chip_TWL6030) {
- vbatch = TWL6030_GPADC_VBAT_CHNL;
- } else {
- ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
- TWL6032_GPSELECT_ISB,
- TWL6032_GPADC_VBAT_CHNL);
- if (ret)
- return ret;
- vbatch = 0;
- }
-
- /* Start GPADC SW conversion */
- ret = twl6030_gpadc_sw2_trigger();
- if (ret) {
- printf("Failed to convert battery voltage\n");
- return ret;
- }
-
- /* measure Vbat voltage */
- battery_volt = twl6030_gpadc_read_channel(vbatch);
- if (battery_volt < 0) {
- printf("Failed to read battery voltage\n");
- return ret;
- }
- battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift;
- printf("Battery Voltage: %d mV\n", battery_volt);
-
- return battery_volt;
-}
-
-void twl6030_init_battery_charging(void)
-{
- u8 val = 0;
- int battery_volt = 0;
- int ret = 0;
-
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val);
- if (ret) {
- puts("twl6030_init_battery_charging(): could not determine chip!\n");
- return;
- }
- if (val == 0x30) {
- twl = &twl6030_info;
- } else if (val == 0x32) {
- twl = &twl6032_info;
- } else {
- puts("twl6030_init_battery_charging(): unsupported chip type\n");
- return;
- }
-
- /* Enable VBAT measurement */
- if (twl->chip_type == chip_TWL6030) {
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
- twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
- TWL6030_GPADC_CTRL,
- GPADC_CTRL_SCALER_DIV4);
- } else {
- twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
- TWL6032_GPADC_CTRL2,
- GPADC_CTRL2_CH18_SCALER_EN);
- }
-
- /* Enable GPADC module */
- ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
- if (ret) {
- printf("Failed to enable GPADC\n");
- return;
- }
-
- battery_volt = twl6030_get_battery_voltage();
- if (battery_volt < 0)
- return;
-
- if (battery_volt < 3000)
- printf("Main battery voltage too low!\n");
-
- /* Check for the presence of USB charger */
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val);
-
- /* check for battery presence indirectly via Fuel gauge */
- if ((val & VBUS_DET) && (battery_volt < 3300))
- twl6030_start_usb_charging();
-
- return;
-}
-
-void twl6030_power_mmc_init(int dev_index)
-{
- u8 value = 0;
-
- if (dev_index == 0) {
- /* 3.0V voltage output for VMMC */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VMMC_CFG_VOLTAGE,
- TWL6030_CFG_VOLTAGE_30);
-
- /* Enable P1 output for VMMC */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VMMC_CFG_STATE,
- TWL6030_CFG_STATE_P1 | TWL6030_CFG_STATE_ON);
- } else if (dev_index == 1) {
- twl6030_i2c_read_u8(TWL6030_CHIP_PM, TWL6030_PH_STS_BOOT,
- &value);
- /* BOOT2 indicates 1.8V/2.8V VAUX1 for eMMC */
- if (value & TWL6030_PH_STS_BOOT2) {
- /* 1.8V voltage output for VAUX1 */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VAUX1_CFG_VOLTAGE,
- TWL6030_CFG_VOLTAGE_18);
- } else {
- /* 2.8V voltage output for VAUX1 */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VAUX1_CFG_VOLTAGE,
- TWL6030_CFG_VOLTAGE_28);
- }
-
- /* Enable P1 output for VAUX */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VAUX1_CFG_STATE,
- TWL6030_CFG_STATE_P1 | TWL6030_CFG_STATE_ON);
- }
-}
-
-void twl6030_usb_device_settings()
-{
- u8 value = 0;
-
- /* 3.3V voltage output for VUSB */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VUSB_CFG_VOLTAGE,
- TWL6030_CFG_VOLTAGE_33);
-
- /* Enable P1 output for VUSB */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VUSB_CFG_STATE,
- TWL6030_CFG_STATE_P1 | TWL6030_CFG_STATE_ON);
-
- /* Select the input supply for VUSB regulator */
- twl6030_i2c_read_u8(TWL6030_CHIP_PM, TWL6030_MISC2, &value);
- value |= TWL6030_MISC2_VUSB_IN_VSYS;
- value &= ~TWL6030_MISC2_VUSB_IN_PMID;
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_MISC2, value);
-}
-
-#if CONFIG_IS_ENABLED(DM_I2C)
-int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_get_chip_for_busnum(0, chip_no, 1, &dev);
- if (ret) {
- pr_err("unable to get I2C bus. ret %d\n", ret);
- return ret;
- }
- ret = dm_i2c_reg_write(dev, reg, val);
- if (ret) {
- pr_err("writing to twl6030 failed. ret %d\n", ret);
- return ret;
- }
- return 0;
-}
-
-int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *valp)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_get_chip_for_busnum(0, chip_no, 1, &dev);
- if (ret) {
- pr_err("unable to get I2C bus. ret %d\n", ret);
- return ret;
- }
- ret = dm_i2c_reg_read(dev, reg);
- if (ret < 0) {
- pr_err("reading from twl6030 failed. ret %d\n", ret);
- return ret;
- }
- *valp = (u8)ret;
- return 0;
-}
-#endif
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 42b69719dd71..6fcb5b523acb 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -227,8 +227,7 @@ static void ns16550_setbrg(struct ns16550 *com_port, int baud_divisor)
void ns16550_init(struct ns16550 *com_port, int baud_divisor)
{
-#if (defined(CONFIG_SPL_BUILD) && \
- (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX)))
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX)
/*
* On some OMAP3/OMAP4 devices when UART3 is configured for boot mode
* before SPL starts only THRE bit is set. We have to empty the
diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h
index 8829567bfb68..40e238f86a84 100644
--- a/drivers/usb/musb-new/linux-compat.h
+++ b/drivers/usb/musb-new/linux-compat.h
@@ -19,8 +19,4 @@
#define CFG_SOC_OMAP3430
#endif
-#ifdef CONFIG_OMAP44XX
-#define CFG_ARCH_OMAP4
-#endif
-
#endif /* __LINUX_COMPAT_H__ */
diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c
index 257e7685cfa3..72caf0e7bd30 100644
--- a/drivers/usb/musb-new/musb_core.c
+++ b/drivers/usb/musb-new/musb_core.c
@@ -1526,7 +1526,7 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_SOC_OMAP2430) || defined(CFG_SOC_OMAP3430) || \
- defined(CFG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
+ defined(CONFIG_ARCH_U8500)
static irqreturn_t generic_interrupt(int irq, void *__hci)
{
diff --git a/drivers/usb/musb-new/musb_core.h b/drivers/usb/musb-new/musb_core.h
index adfd81b85448..96ee13982648 100644
--- a/drivers/usb/musb-new/musb_core.h
+++ b/drivers/usb/musb-new/musb_core.h
@@ -151,7 +151,7 @@ enum musb_g_ep0_state {
*/
#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
- || defined(CFG_SOC_OMAP3430) || defined(CFG_ARCH_OMAP4)
+ || defined(CFG_SOC_OMAP3430)
/* REVISIT indexed access seemed to
* misbehave (on DaVinci) for at least peripheral IN ...
*/
diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c
index 96771c28cefd..ba600d011023 100644
--- a/drivers/usb/musb-new/omap2430.c
+++ b/drivers/usb/musb-new/omap2430.c
@@ -21,7 +21,6 @@
#include <asm/omap_common.h>
#include <asm/omap_musb.h>
#include <twl4030.h>
-#include <twl6030.h>
#include "linux-compat.h"
#include "musb_core.h"
#include "omap2430.h"
@@ -104,17 +103,6 @@ static int omap2430_musb_enable(struct musb *musb)
__PRETTY_FUNCTION__);
}
#endif
-
-#ifdef CONFIG_TWL6030_POWER
- twl6030_usb_device_settings();
-#endif
-
-#ifdef CONFIG_OMAP44XX
- u32 *usbotghs_control = (u32 *)((*ctrl)->control_usbotghs_ctrl);
- *usbotghs_control = USBOTGHS_CONTROL_AVALID |
- USBOTGHS_CONTROL_VBUSVALID | USBOTGHS_CONTROL_IDDIG;
-#endif
-
return 0;
}
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index 080bd78523c9..60e245dee462 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -19,7 +19,6 @@
#include <serial.h>
#include <asm/omap_common.h>
#include <twl4030.h>
-#include <twl6030.h>
#include "omap3.h"
static int platform_needs_initialization = 1;
@@ -54,12 +53,7 @@ static struct omap3_otg_regs *otg;
#define OMAP3_OTG_SYSSTATUS_RESETDONE 0x0001
-/* OMAP4430 has an internal PHY, use it */
-#ifdef CONFIG_OMAP44XX
-#define OMAP3_OTG_INTERFSEL_OMAP 0x0000
-#else
#define OMAP3_OTG_INTERFSEL_OMAP 0x0001
-#endif
#define OMAP3_OTG_FORCESTDBY_STANDBY 0x0001
@@ -100,10 +94,6 @@ int musb_platform_init(void)
}
#endif
-#ifdef CONFIG_TWL6030_POWER
- twl6030_usb_device_settings();
-#endif
-
otg = (struct omap3_otg_regs *)OMAP3_OTG_BASE;
/* Set OTG to always be on */
@@ -122,11 +112,6 @@ int musb_platform_init(void)
musb_cfg.extvbus = omap3_evm_need_extvbus();
#endif
-#ifdef CONFIG_OMAP44XX
- u32 *usbotghs_control =
- (u32 *)((*ctrl)->control_usbotghs_ctrl);
- *usbotghs_control = 0x15;
-#endif
platform_needs_initialization = 0;
}
diff --git a/include/twl6030.h b/include/twl6030.h
deleted file mode 100644
index e3a1058091ae..000000000000
--- a/include/twl6030.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- */
-
-#ifndef TWL6030_H
-#define TWL6030_H
-
-#include <i2c.h>
-
-/* I2C chip addresses */
-#define TWL6030_CHIP_PM 0x48
-
-#define TWL6030_CHIP_USB 0x49
-#define TWL6030_CHIP_ADC 0x49
-#define TWL6030_CHIP_CHARGER 0x49
-#define TWL6030_CHIP_PWM 0x49
-
-/* Slave Address 0x48 */
-#define TWL6030_STS_HW_CONDITIONS 0x21
-
-#define TWL6030_STS_HW_CONDITIONS_PWRON (1 << 0)
-
-#define TWL6030_PHOENIX_DEV_ON 0x25
-
-#define TWL6030_PHOENIX_APP_DEVOFF (1 << 0)
-#define TWL6030_PHOENIX_CON_DEVOFF (1 << 1)
-#define TWL6030_PHOENIX_MOD_DEVOFF (1 << 2)
-
-#define TWL6030_PH_STS_BOOT 0x29
-
-#define TWL6030_PH_STS_BOOT0 (1 << 0)
-#define TWL6030_PH_STS_BOOT1 (1 << 1)
-#define TWL6030_PH_STS_BOOT2 (1 << 2)
-#define TWL6030_PH_STS_BOOT3 (1 << 3)
-
-#define TWL6030_VAUX1_CFG_STATE 0x86
-#define TWL6030_VAUX1_CFG_VOLTAGE 0x87
-#define TWL6030_VMMC_CFG_STATE 0x9A
-#define TWL6030_VMMC_CFG_VOLTAGE 0x9B
-#define TWL6030_VUSB_CFG_STATE 0xA2
-#define TWL6030_VUSB_CFG_VOLTAGE 0xA3
-
-#define TWL6030_CFG_GRP_P1 (1 << 0)
-#define TWL6030_CFG_STATE_ON (1 << 0)
-#define TWL6030_CFG_STATE_P1 (TWL6030_CFG_GRP_P1 << 5)
-#define TWL6030_CFG_VOLTAGE_18 0x09
-#define TWL6030_CFG_VOLTAGE_28 0x13
-#define TWL6030_CFG_VOLTAGE_30 0x15
-#define TWL6030_CFG_VOLTAGE_33 0x18
-
-#define MISC1 0xE4
-#define VAC_MEAS (1 << 2)
-#define VBAT_MEAS (1 << 1)
-#define BB_MEAS (1 << 0)
-
-#define TWL6030_MISC2 0xE5
-#define TWL6030_MISC2_VUSB_IN_PMID (1 << 3)
-#define TWL6030_MISC2_VUSB_IN_VSYS (1 << 4)
-
-/* Slave Address 0x49 */
-
-#define TWL6030_CONTROLLER_STAT1 0xE3
-
-#define TWL6030_CONTROLLER_STAT1_VAC_DET (1 << 3)
-#define TWL6030_CONTROLLER_STAT1_VBUS_DET (1 << 2)
-
-/* Battery CHARGER REGISTERS */
-#define CONTROLLER_INT_MASK 0xE0
-#define CONTROLLER_CTRL1 0xE1
-#define CONTROLLER_WDG 0xE2
-#define CONTROLLER_STAT1 0xE3
-#define CHARGERUSB_INT_STATUS 0xE4
-#define CHARGERUSB_INT_MASK 0xE5
-#define CHARGERUSB_STATUS_INT1 0xE6
-#define CHARGERUSB_STATUS_INT2 0xE7
-#define CHARGERUSB_CTRL1 0xE8
-#define CHARGERUSB_CTRL2 0xE9
-#define CHARGERUSB_CTRL3 0xEA
-#define CHARGERUSB_STAT1 0xEB
-#define CHARGERUSB_VOREG 0xEC
-#define CHARGERUSB_VICHRG 0xED
-#define CHARGERUSB_CINLIMIT 0xEE
-#define CHARGERUSB_CTRLLIMIT1 0xEF
-
-/* CHARGERUSB_VICHRG */
-#define CHARGERUSB_VICHRG_500 0x4
-#define CHARGERUSB_VICHRG_1500 0xE
-/* CHARGERUSB_CINLIMIT */
-#define CHARGERUSB_CIN_LIMIT_100 0x1
-#define CHARGERUSB_CIN_LIMIT_300 0x5
-#define CHARGERUSB_CIN_LIMIT_500 0x9
-#define CHARGERUSB_CIN_LIMIT_NONE 0xF
-/* CONTROLLER_INT_MASK */
-#define MVAC_FAULT (1 << 6)
-#define MAC_EOC (1 << 5)
-#define MBAT_REMOVED (1 << 4)
-#define MFAULT_WDG (1 << 3)
-#define MBAT_TEMP (1 << 2)
-#define MVBUS_DET (1 << 1)
-#define MVAC_DET (1 << 0)
-/* CHARGERUSB_INT_MASK */
-#define MASK_MCURRENT_TERM (1 << 3)
-#define MASK_MCHARGERUSB_STAT (1 << 2)
-#define MASK_MCHARGERUSB_THMREG (1 << 1)
-#define MASK_MCHARGERUSB_FAULT (1 << 0)
-/* CHARGERUSB_VOREG */
-#define CHARGERUSB_VOREG_3P52 0x01
-#define CHARGERUSB_VOREG_4P0 0x19
-#define CHARGERUSB_VOREG_4P2 0x23
-#define CHARGERUSB_VOREG_4P76 0x3F
-/* CHARGERUSB_CTRL1 */
-#define SUSPEND_BOOT (1 << 7)
-#define OPA_MODE (1 << 6)
-#define HZ_MODE (1 << 5)
-#define TERM (1 << 4)
-/* CHARGERUSB_CTRL2 */
-#define CHARGERUSB_CTRL2_VITERM_50 (0 << 5)
-#define CHARGERUSB_CTRL2_VITERM_100 (1 << 5)
-#define CHARGERUSB_CTRL2_VITERM_150 (2 << 5)
-#define CHARGERUSB_CTRL2_VITERM_400 (7 << 5)
-/* CONTROLLER_CTRL1 */
-#define CONTROLLER_CTRL1_EN_CHARGER (1 << 4)
-#define CONTROLLER_CTRL1_SEL_CHARGER (1 << 3)
-/* CONTROLLER_STAT1 */
-#define CHRG_EXTCHRG_STATZ (1 << 7)
-#define CHRG_DET_N (1 << 5)
-#define VAC_DET (1 << 3)
-#define VBUS_DET (1 << 2)
-
-#define FG_REG_10 0xCA
-#define FG_REG_11 0xCB
-
-#define TOGGLE1 0x90
-#define FGS (1 << 5)
-#define FGR (1 << 4)
-#define GPADCS (1 << 1)
-#define GPADCR (1 << 0)
-
-#define CTRL_P2 0x34
-#define CTRL_P2_SP2 (1 << 2)
-#define CTRL_P2_EOCP2 (1 << 1)
-#define CTRL_P2_BUSY (1 << 0)
-
-#define TWL6032_CTRL_P1 0x36
-#define CTRL_P1_SP1 (1 << 3)
-
-#define GPCH0_LSB 0x57
-#define GPCH0_MSB 0x58
-
-#define TWL6032_GPCH0_LSB 0x3b
-
-#define TWL6032_GPSELECT_ISB 0x35
-
-#define USB_PRODUCT_ID_LSB 0x02
-
-#define TWL6030_GPADC_VBAT_CHNL 0x07
-#define TWL6032_GPADC_VBAT_CHNL 0x12
-
-#define TWL6030_GPADC_CTRL 0x2e
-#define TWL6032_GPADC_CTRL2 0x2f
-#define GPADC_CTRL2_CH18_SCALER_EN (1 << 2)
-#define GPADC_CTRL_SCALER_DIV4 (1 << 3)
-
-#define TWL6030_VBAT_MULT 40 * 1000
-#define TWL6032_VBAT_MULT 25 * 1000
-
-#define TWL6030_VBAT_SHIFT (10 + 3)
-#define TWL6032_VBAT_SHIFT (12 + 2)
-
-enum twl603x_chip_type{
- chip_TWL6030,
- chip_TWL6032,
- chip_TWL603X_cnt
-};
-
-struct twl6030_data{
- u8 chip_type;
- u8 adc_rbase;
- u8 adc_ctrl;
- u8 adc_enable;
- int vbat_mult;
- int vbat_shift;
-};
-
-/* Functions to read and write from TWL6030 */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
-{
- return i2c_write(chip_no, reg, 1, &val, 1);
-}
-
-static inline int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
-{
- return i2c_read(chip_no, reg, 1, val, 1);
-}
-#else
-int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val);
-int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val);
-#endif
-
-/*
- * Power
- */
-
-void twl6030_power_off(void);
-void twl6030_init_battery_charging(void);
-void twl6030_usb_device_settings(void);
-void twl6030_start_usb_charging(void);
-void twl6030_stop_usb_charging(void);
-int twl6030_get_battery_voltage(void);
-int twl6030_get_battery_current(void);
-void twl6030_power_mmc_init(int dev_index);
-
-/*
- * Input
- */
-
-int twl6030_input_power_button(void);
-int twl6030_input_charger(void);
-int twl6030_input_usb(void);
-
-#endif /* TWL6030_H */
--
2.34.1
More information about the U-Boot
mailing list