[PATCH 1/3] arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar

[Kever Yang]

On 2024/7/4 20:53, Quentin Schulz wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
>
> The Jaguar SBC provides an M.2 slot connected to the pcie3 controller.
> In contrast to a number of other boards the pcie-refclk is gpio-controlled,
> so the necessary clock and is added to the list of pcie3 clocks.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
> Reviewed-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
> Link: https://lore.kernel.org/r/20240423074956.2622318-1-heiko@sntech.de
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
>
> [ upstream commit: 0ec7e1096332bc2b9bc881c21cfd234058f747b3 ]
>
> (cherry picked from commit 76a89655ae740dddb57187b5b52071ed99187452)
> ---
>   dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts | 59 +++++++++++++++++++++++
>   1 file changed, 59 insertions(+)
>
> diff --git a/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts b/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts
> index 7d7303f8ecb..678ed8b4dcc 100644
> --- a/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts
> +++ b/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts
> @@ -72,6 +72,27 @@
>   		};
>   	};
>   
> +	/*
> +	 * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
> +	 * clock generator.
> +	 * The clock output is gated via the OE pin on the clock generator.
> +	 * This is modeled as a fixed-clock plus a gpio-gate-clock.
> +	 */
> +	pcie_refclk_gen: pcie-refclk-gen-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +	};
> +
> +	pcie_refclk: pcie-refclk-clock {
> +		compatible = "gpio-gate-clock";
> +		clocks = <&pcie_refclk_gen>;
> +		#clock-cells = <0>;
> +		enable-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; /* PCIE30X4_CLKREQN_M0 */
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie30x4_clkreqn_m0>;
> +	};
> +
>   	pps {
>   		compatible = "pps-gpio";
>   		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> @@ -353,6 +374,30 @@
>   	status = "okay";
>   };
>   
> +&pcie30phy {
> +	status = "okay";
> +};
> +
> +&pcie3x4 {
> +	/*
> +	 * The board has a gpio-controlled "pcie_refclk" generator,
> +	 * so add it to the list of clocks.
> +	 */
> +	clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
> +		 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
> +		 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
> +		 <&pcie_refclk>;
> +	clock-names = "aclk_mst", "aclk_slv",
> +		      "aclk_dbi", "pclk",
> +		      "aux", "pipe",
> +		      "ref";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x4_waken_m0 &pcie30x4_perstn_m0>;
> +	reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTN_M0 */
> +	vpcie3v3-supply = <&vcc3v3_mdot2>;
> +	status = "okay";
> +};
> +
>   &pinctrl {
>   	emmc {
>   		emmc_reset: emmc-reset {
> @@ -371,6 +416,20 @@
>   			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
>   		};
>   	};
> +
> +	pcie30x4 {
> +		pcie30x4_clkreqn_m0: pcie30x4-clkreqn-m0 {
> +			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x4_perstn_m0: pcie30x4-perstn-m0 {
> +			rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x4_waken_m0: pcie30x4-waken-m0 {
> +			rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>;
> +		};
> +	};
>   };
>   
>   &saradc {
>