[PATCH 1/3] arm: dts: am625_beagleplay: Switch to OF_UPSTREAM
Nishanth Menon
nm at ti.com
Wed Jun 5 17:27:50 CEST 2024
Enable OF_UPSTREAM for AM625-beagleplay board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <nm at ti.com>
---
arch/arm/dts/Makefile | 1 -
arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 4 +-
arch/arm/dts/k3-am625-beagleplay.dts | 932 -------------------
configs/am62x_beagleplay_a53_defconfig | 3 +-
4 files changed, 4 insertions(+), 936 deletions(-)
delete mode 100644 arch/arm/dts/k3-am625-beagleplay.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 624dadf8ece2..813426a3e519 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1200,7 +1200,6 @@ dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-r5-evm.dtb \
dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
k3-am625-r5-sk.dtb \
- k3-am625-beagleplay.dtb \
k3-am625-r5-beagleplay.dtb \
k3-am625-verdin-r5.dtb \
k3-am625-r5-phycore-som-2gb.dtb
diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index 9ac4a825f841..dd5b335ed2ee 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -66,9 +66,9 @@
#ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY
#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
-#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/k3-am625-beagleplay.dtb"
+#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/ti/k3-am625-beagleplay.dtb"
#define UBOOT_NODTB "u-boot-nodtb.bin"
-#define AM625_BEAGLEPLAY_DTB "arch/arm/dts/k3-am625-beagleplay.dtb"
+#define AM625_BEAGLEPLAY_DTB "dts/upstream/src/arm64/ti/k3-am625-beagleplay.dtb"
&binman {
ti-dm {
diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
deleted file mode 100644
index 8ab838f1697c..000000000000
--- a/arch/arm/dts/k3-am625-beagleplay.dts
+++ /dev/null
@@ -1,932 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * https://beagleplay.org/
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation
- */
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "k3-am625.dtsi"
-
-/ {
- compatible = "beagle,am625-beagleplay", "ti,am625";
- model = "BeagleBoard.org BeaglePlay";
-
- aliases {
- ethernet0 = &cpsw_port1;
- ethernet1 = &cpsw_port2;
- gpio0 = &main_gpio0;
- gpio1 = &main_gpio1;
- gpio2 = &mcu_gpio0;
- i2c0 = &main_i2c0;
- i2c1 = &main_i2c1;
- i2c2 = &main_i2c2;
- i2c3 = &main_i2c3;
- i2c4 = &wkup_i2c0;
- i2c5 = &mcu_i2c0;
- mmc0 = &sdhci0;
- mmc1 = &sdhci1;
- mmc2 = &sdhci2;
- rtc0 = &rtc;
- serial0 = &main_uart5;
- serial1 = &main_uart6;
- serial2 = &main_uart0;
- usb0 = &usb0;
- usb1 = &usb1;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory at 80000000 {
- bootph-pre-ram;
- device_type = "memory";
- /* 2G RAM */
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- ramoops: ramoops at 9ca00000 {
- compatible = "ramoops";
- reg = <0x00 0x9ca00000 0x00 0x00100000>;
- record-size = <0x8000>;
- console-size = <0x8000>;
- ftrace-size = <0x00>;
- pmsg-size = <0x8000>;
- };
-
- secure_tfa_ddr: tfa at 9e780000 {
- reg = <0x00 0x9e780000 0x00 0x80000>;
- no-map;
- };
-
- secure_ddr: optee at 9e800000 {
- reg = <0x00 0x9e800000 0x00 0x01800000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9db00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9db00000 0x00 0xc00000>;
- no-map;
- };
- };
-
- vsys_5v0: regulator-1 {
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vsys_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_3v3: regulator-2 {
- /* output of TLV62595DMQR-U12 */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vdd_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vsys_5v0>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- wlan_en: regulator-3 {
- /* OUTPUT of SN74AVC2T244DQMR */
- compatible = "regulator-fixed";
- regulator-name = "wlan_en";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- regulator-always-on;
- vin-supply = <&vdd_3v3>;
- gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_en_pins_default>;
- };
-
- vdd_3v3_sd: regulator-4 {
- /* output of TPS22918DBVR-U21 */
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&vdd_3v3_sd_pins_default>;
-
- compatible = "regulator-fixed";
- regulator-name = "vdd_3v3_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- regulator-always-on;
- vin-supply = <&vdd_3v3>;
- gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
- };
-
- vdd_sd_dv: regulator-5 {
- bootph-all;
- compatible = "regulator-gpio";
- regulator-name = "sd_hs200_switch";
- pinctrl-names = "default";
- pinctrl-0 = <&vdd_sd_dv_pins_default>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- vin-supply = <&ldo1_reg>;
- gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x0>,
- <3300000 0x1>;
- };
-
- leds {
- bootph-all;
- compatible = "gpio-leds";
-
- led-0 {
- bootph-all;
- gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- function = LED_FUNCTION_HEARTBEAT;
- default-state = "off";
- };
-
- led-1 {
- bootph-all;
- gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "disk-activity";
- function = LED_FUNCTION_DISK_ACTIVITY;
- default-state = "keep";
- };
-
- led-2 {
- bootph-all;
- gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
- function = LED_FUNCTION_CPU;
- };
-
- led-3 {
- bootph-all;
- gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
- function = LED_FUNCTION_LAN;
- };
-
- led-4 {
- bootph-all;
- gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
- function = LED_FUNCTION_WLAN;
- };
- };
-
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&usr_button_pins_default>;
-
- usr: button-usr {
- label = "User Key";
- linux,code = <BTN_0>;
- gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
- };
-
- hdmi0: connector-hdmi {
- compatible = "hdmi-connector";
- label = "hdmi";
- type = "a";
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&it66121_out>;
- };
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "it66121 HDMI";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
- simple-audio-card,frame-master = <&hdmi_dailink_master>;
-
- hdmi_dailink_master: simple-audio-card,cpu {
- sound-dai = <&mcasp1>;
- system-clock-direction-out;
- };
-
- simple-audio-card,codec {
- sound-dai = <&it66121>;
- };
- };
-
-};
-
-&main_pmx0 {
- gpio0_pins_default: gpio0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
- AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
- AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
- AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
- AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
- AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
- AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
- AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
- AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
- AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
- AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
- AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
- AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
- AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
- >;
- };
-
- vdd_sd_dv_pins_default: vdd-sd-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
- >;
- };
-
- usr_button_pins_default: usr-button-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
- >;
- };
-
- grove_pins_default: grove-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
- AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
- >;
- };
-
- local_i2c_pins_default: local-i2c-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
- AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
- >;
- };
-
- i2c2_1v8_pins_default: i2c2-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
- AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
- >;
- };
-
- mdio0_pins_default: mdio0-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
- AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
- AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */
- AM62X_IOPAD(0x018c, PIN_INPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
- >;
- };
-
- rgmii1_pins_default: rgmii1-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
- AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
- AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
- AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
- AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
- AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
- AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
- AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
- AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
- AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
- AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
- AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
- >;
- };
-
- emmc_pins_default: emmc-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
- AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
- AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
- AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
- AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
- AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
- AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
- AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
- AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
- AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
- >;
- };
-
- vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
- >;
- };
-
- sd_pins_default: sd-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
- AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
- AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
- AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
- AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
- AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
- AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
- >;
- };
-
- wifi_pins_default: wifi-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
- AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
- AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
- AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
- AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
- AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
- AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
- AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
- >;
- };
-
- wifi_en_pins_default: wifi-en-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
- >;
- };
-
- wifi_wlirq_pins_default: wifi-wlirq-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
- >;
- };
-
- spe_pins_default: spe-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
- AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
- AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
- AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
- AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
- AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
- AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
- AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
- AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
- AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
- >;
- };
-
- mikrobus_i2c_pins_default: mikrobus-i2c-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
- AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
- >;
- };
-
- mikrobus_uart_pins_default: mikrobus-uart-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */
- AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */
- >;
- };
-
- mikrobus_spi_pins_default: mikrobus-spi-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */
- AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */
- AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */
- AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
- >;
- };
-
- mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
- AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
- AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
- >;
- };
-
- main_uart0_pins_default: main-uart0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
- AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
- >;
- };
-
- wifi_debug_uart_pins_default: wifi-debug-uart-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
- AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
- >;
- };
-
- usb1_pins_default: usb1-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
- >;
- };
-
- pmic_irq_pins_default: pmic-irq-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
- >;
- };
-
- hdmi_gpio_pins_default: hdmi-gpio-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
- AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
- >;
- };
-
- mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
- AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
- AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
- AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
- AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
- AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
- >;
- };
-
- dss0_pins_default: dss0-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
- AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
- AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
- AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
- AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
- AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
- AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
- AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
- AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
- AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
- AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
- AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
- AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
- AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
- AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
- AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
- AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
- AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
- AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
- AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
- AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
- AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
- AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
- AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
- AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
- AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
- AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
- AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
- >;
- };
-};
-
-&mcu_pmx0 {
- i2c_qwiic_pins_default: i2c-qwiic-default-pins {
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
- AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
- >;
- };
-
- gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
- >;
- };
-
- i2c_csi_pins_default: i2c-csi-default-pins {
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
- AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
- >;
- };
-
- wifi_32k_clk: mcu-clk-out-default-pins {
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
- >;
- };
-};
-
-&a53_opp_table {
- /* Requires VDD_CORE to be at 0.85V */
- opp-1400000000 {
- opp-hz = /bits/ 64 <1400000000>;
- opp-supported-hw = <0x01 0x0004>;
- };
-};
-
-&wkup_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_csi_pins_default>;
- clock-frequency = <400000>;
- /* Enable with overlay for camera sensor */
-};
-
-&mcu_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_qwiic_pins_default>;
- clock-frequency = <100000>;
- status = "okay";
-};
-
-&usbss0 {
- bootph-all;
- ti,vbus-divider;
- status = "okay";
-};
-
-&usb0 {
- bootph-all;
- dr_mode = "peripheral";
-};
-
-&usbss1 {
- ti,vbus-divider;
- status = "okay";
-};
-
-&usb1 {
- dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_pins_default>;
-};
-
-&cpsw3g {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>,
- <&gbe_pmx_obsclk>;
- assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
- assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
-};
-
-&cpsw_port1 {
- phy-mode = "rgmii-rxid";
- phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw_port2 {
- phy-mode = "rmii";
- phy-handle = <&cpsw3g_phy1>;
-};
-
-&cpsw3g_mdio {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mdio0_pins_default>;
-
- cpsw3g_phy0: ethernet-phy at 0 {
- reg = <0>;
- reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <50000>;
- };
-
- cpsw3g_phy1: ethernet-phy at 1 {
- reg = <1>;
- reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
- reset-assert-us = <25>;
- reset-deassert-us = <60000>; /* T2 */
- };
-};
-
-&main_gpio0 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&gpio0_pins_default>;
- gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */
- "USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */
- "EEPROM_WP", /* 10 */
- "CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */
- "CC1352P7_BOOT", "CC1352P7_RSTN", "GBE_RSTN", "", "", /* 13-17 */
- "USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */
- "", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */
- "", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
- "", "", "", "", "", "", "", "", "", "", "", "", /* 43-54 */
- "", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
- "", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
- "", "", "", "", "", "", /* 79-84 */
- "BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK", /* 85-86 */
- "", "", "", "", ""; /* 87-91 */
-};
-
-&main_gpio1 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&mikrobus_gpio_pins_default>;
- gpio-line-names = "", "", "", "", "", /* 0-4 */
- "SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7", /* 5-7 */
- "MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9", /* 8-9 */
- "MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11", /* 10-11 */
- "MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0", /* 12-13 */
- "MIKROBUS_GPIO1_14", /* 14 */
- "", "", "", "", "VDD_3V3_SD", "", "", /* 15-21 */
- "MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23", /* 22-23 */
- "MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25", /* 24-25 */
- "", "", "", "", "", "", "", "", "", "", "", "", /* 26-37 */
- "", "", "", "", "", "", "", "", "", "", /* 38-47 */
- "SD_CD", "SD_VOLT_SEL", "", ""; /* 48-51 */
-};
-
-&main_i2c0 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&local_i2c_pins_default>;
- clock-frequency = <400000>;
- status = "okay";
-
- eeprom at 50 {
- compatible = "atmel,24c32";
- reg = <0x50>;
- };
-
- rtc: rtc at 68 {
- compatible = "ti,bq32000";
- reg = <0x68>;
- interrupt-parent = <&main_gpio0>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- };
-
- tps65219: pmic at 30 {
- bootph-all;
- compatible = "ti,tps65219";
- reg = <0x30>;
- buck1-supply = <&vsys_5v0>;
- buck2-supply = <&vsys_5v0>;
- buck3-supply = <&vsys_5v0>;
- ldo1-supply = <&vdd_3v3>;
- ldo2-supply = <&buck2_reg>;
- ldo3-supply = <&vdd_3v3>;
- ldo4-supply = <&vdd_3v3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_irq_pins_default>;
- interrupt-parent = <&gic500>;
- interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- system-power-controller;
- ti,power-button;
-
- regulators {
- buck1_reg: buck1 {
- regulator-name = "VDD_CORE";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck2_reg: buck2 {
- regulator-name = "VDD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck3_reg: buck3 {
- regulator-name = "VDD_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: ldo1 {
- /*
- * Regulator is left as is unused, vdd_sd
- * is controlled via GPIO with bypass config
- * as per the NVM configuration
- */
- regulator-name = "VDD_SD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-allow-bypass;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ldo2 {
- regulator-name = "VDDA_0V85";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3_reg: ldo3 {
- regulator-name = "VDDA_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: ldo4 {
- regulator-name = "VDD_2V5";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&main_i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&grove_pins_default>;
- clock-frequency = <100000>;
- status = "okay";
-};
-
-&main_i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_1v8_pins_default>;
- clock-frequency = <100000>;
- status = "okay";
-
- it66121: bridge-hdmi at 4c {
- compatible = "ite,it66121";
- reg = <0x4c>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_gpio_pins_default>;
- vcn33-supply = <&vdd_3v3>;
- vcn18-supply = <&buck2_reg>;
- vrf12-supply = <&buck3_reg>;
- reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&main_gpio0>;
- interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
- #sound-dai-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
-
- it66121_in: endpoint {
- bus-width = <24>;
- remote-endpoint = <&dpi1_out>;
- };
- };
-
- port at 1 {
- reg = <1>;
-
- it66121_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
- };
- };
-};
-
-&main_i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mikrobus_i2c_pins_default>;
- clock-frequency = <400000>;
- status = "okay";
-};
-
-&main_spi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mikrobus_spi_pins_default>;
- status = "okay";
-};
-
-&sdhci0 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_pins_default>;
- disable-wp;
- status = "okay";
-};
-
-&sdhci1 {
- /* SD/MMC */
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&sd_pins_default>;
-
- vmmc-supply = <&vdd_3v3_sd>;
- vqmmc-supply = <&vdd_sd_dv>;
- disable-wp;
- cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
- cd-debounce-delay-ms = <100>;
- ti,fails-without-test-cd;
- status = "okay";
-};
-
-&sdhci2 {
- vmmc-supply = <&wlan_en>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
- non-removable;
- ti,fails-without-test-cd;
- cap-power-off-card;
- keep-power-in-suspend;
- assigned-clocks = <&k3_clks 157 158>;
- assigned-clock-parents = <&k3_clks 157 160>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- wlcore: wlcore at 2 {
- compatible = "ti,wl1807";
- reg = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_wlirq_pins_default>;
- interrupt-parent = <&main_gpio0>;
- interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
- };
-};
-
-&main_uart0 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
- status = "okay";
-};
-
-&main_uart1 {
- /* Main UART1 is used by TIFS firmware */
- status = "reserved";
-};
-
-&main_uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&mikrobus_uart_pins_default>;
- status = "okay";
-};
-
-&main_uart6 {
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_debug_uart_pins_default>;
- status = "okay";
-
- mcu {
- compatible = "ti,cc1352p7";
- reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
- vdds-supply = <&vdd_3v3>;
- };
-};
-
-&dss {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dss0_pins_default>;
-};
-
-&dss_ports {
- /* VP2: DPI Output */
- port at 1 {
- reg = <1>;
-
- dpi1_out: endpoint {
- remote-endpoint = <&it66121_in>;
- };
- };
-};
-
-&mcasp1 {
- status = "okay";
- #sound-dai-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&mcasp_hdmi_pins_default>;
- auxclk-fs-ratio = <2177>;
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 1 0 0 0
- 0 0 0 0
- 0 0 0 0
- 0 0 0 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
diff --git a/configs/am62x_beagleplay_a53_defconfig b/configs/am62x_beagleplay_a53_defconfig
index ec62670d55d6..455dd86b2fc3 100644
--- a/configs/am62x_beagleplay_a53_defconfig
+++ b/configs/am62x_beagleplay_a53_defconfig
@@ -10,7 +10,7 @@ CONFIG_TARGET_AM625_A53_BEAGLEPLAY=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="k3-am625-beagleplay"
+CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-beagleplay"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
@@ -58,6 +58,7 @@ CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
--
2.43.0
More information about the U-Boot
mailing list