[PATCH 1/3] arm: dts: am625_beagleplay: Switch to OF_UPSTREAM

Mattijs Korpershoek mkorpershoek at baylibre.com
Thu Jun 6 11:24:31 CEST 2024


Hi Nishanth,

Thank you for the patch.

On mer., juin 05, 2024 at 10:27, Nishanth Menon <nm at ti.com> wrote:

> Enable OF_UPSTREAM for AM625-beagleplay board. Remove DT files that
> are now available in dts/upstream. Update the appended files based on
> version of latest OF_UPSTREAM sync point (v6.10-rc1).
>
> Signed-off-by: Nishanth Menon <nm at ti.com>

Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>

> ---
>  arch/arm/dts/Makefile                        |   1 -
>  arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi |   4 +-
>  arch/arm/dts/k3-am625-beagleplay.dts         | 932 -------------------
>  configs/am62x_beagleplay_a53_defconfig       |   3 +-
>  4 files changed, 4 insertions(+), 936 deletions(-)
>  delete mode 100644 arch/arm/dts/k3-am625-beagleplay.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 624dadf8ece2..813426a3e519 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1200,7 +1200,6 @@ dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-r5-evm.dtb \
>  
>  dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
>  			      k3-am625-r5-sk.dtb \
> -			      k3-am625-beagleplay.dtb \
>  			      k3-am625-r5-beagleplay.dtb \
>  			      k3-am625-verdin-r5.dtb \
>  			      k3-am625-r5-phycore-som-2gb.dtb
> diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> index 9ac4a825f841..dd5b335ed2ee 100644
> --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> @@ -66,9 +66,9 @@
>  #ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY
>  
>  #define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
> -#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/k3-am625-beagleplay.dtb"
> +#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/ti/k3-am625-beagleplay.dtb"
>  #define UBOOT_NODTB "u-boot-nodtb.bin"
> -#define AM625_BEAGLEPLAY_DTB "arch/arm/dts/k3-am625-beagleplay.dtb"
> +#define AM625_BEAGLEPLAY_DTB "dts/upstream/src/arm64/ti/k3-am625-beagleplay.dtb"
>  
>  &binman {
>  	ti-dm {
> diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
> deleted file mode 100644
> index 8ab838f1697c..000000000000
> --- a/arch/arm/dts/k3-am625-beagleplay.dts
> +++ /dev/null
> @@ -1,932 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * https://beagleplay.org/
> - *
> - * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
> - * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation
> - */
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include "k3-am625.dtsi"
> -
> -/ {
> -	compatible = "beagle,am625-beagleplay", "ti,am625";
> -	model = "BeagleBoard.org BeaglePlay";
> -
> -	aliases {
> -		ethernet0 = &cpsw_port1;
> -		ethernet1 = &cpsw_port2;
> -		gpio0 = &main_gpio0;
> -		gpio1 = &main_gpio1;
> -		gpio2 = &mcu_gpio0;
> -		i2c0 = &main_i2c0;
> -		i2c1 = &main_i2c1;
> -		i2c2 = &main_i2c2;
> -		i2c3 = &main_i2c3;
> -		i2c4 = &wkup_i2c0;
> -		i2c5 = &mcu_i2c0;
> -		mmc0 = &sdhci0;
> -		mmc1 = &sdhci1;
> -		mmc2 = &sdhci2;
> -		rtc0 = &rtc;
> -		serial0 = &main_uart5;
> -		serial1 = &main_uart6;
> -		serial2 = &main_uart0;
> -		usb0 = &usb0;
> -		usb1 = &usb1;
> -	};
> -
> -	chosen {
> -		stdout-path = "serial2:115200n8";
> -	};
> -
> -	memory at 80000000 {
> -		bootph-pre-ram;
> -		device_type = "memory";
> -		/* 2G RAM */
> -		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
> -	};
> -
> -	reserved-memory {
> -		#address-cells = <2>;
> -		#size-cells = <2>;
> -		ranges;
> -
> -		ramoops: ramoops at 9ca00000 {
> -			compatible = "ramoops";
> -			reg = <0x00 0x9ca00000 0x00 0x00100000>;
> -			record-size = <0x8000>;
> -			console-size = <0x8000>;
> -			ftrace-size = <0x00>;
> -			pmsg-size = <0x8000>;
> -		};
> -
> -		secure_tfa_ddr: tfa at 9e780000 {
> -			reg = <0x00 0x9e780000 0x00 0x80000>;
> -			no-map;
> -		};
> -
> -		secure_ddr: optee at 9e800000 {
> -			reg = <0x00 0x9e800000 0x00 0x01800000>;
> -			no-map;
> -		};
> -
> -		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9db00000 {
> -			compatible = "shared-dma-pool";
> -			reg = <0x00 0x9db00000 0x00 0xc00000>;
> -			no-map;
> -		};
> -	};
> -
> -	vsys_5v0: regulator-1 {
> -		bootph-all;
> -		compatible = "regulator-fixed";
> -		regulator-name = "vsys_5v0";
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		regulator-always-on;
> -		regulator-boot-on;
> -	};
> -
> -	vdd_3v3: regulator-2 {
> -		/* output of TLV62595DMQR-U12 */
> -		bootph-all;
> -		compatible = "regulator-fixed";
> -		regulator-name = "vdd_3v3";
> -		regulator-min-microvolt = <3300000>;
> -		regulator-max-microvolt = <3300000>;
> -		vin-supply = <&vsys_5v0>;
> -		regulator-always-on;
> -		regulator-boot-on;
> -	};
> -
> -	wlan_en: regulator-3 {
> -		/* OUTPUT of SN74AVC2T244DQMR */
> -		compatible = "regulator-fixed";
> -		regulator-name = "wlan_en";
> -		regulator-min-microvolt = <1800000>;
> -		regulator-max-microvolt = <1800000>;
> -		enable-active-high;
> -		regulator-always-on;
> -		vin-supply = <&vdd_3v3>;
> -		gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&wifi_en_pins_default>;
> -	};
> -
> -	vdd_3v3_sd: regulator-4 {
> -		/* output of TPS22918DBVR-U21 */
> -		bootph-all;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
> -
> -		compatible = "regulator-fixed";
> -		regulator-name = "vdd_3v3_sd";
> -		regulator-min-microvolt = <3300000>;
> -		regulator-max-microvolt = <3300000>;
> -		enable-active-high;
> -		regulator-always-on;
> -		vin-supply = <&vdd_3v3>;
> -		gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
> -	};
> -
> -	vdd_sd_dv: regulator-5 {
> -		bootph-all;
> -		compatible = "regulator-gpio";
> -		regulator-name = "sd_hs200_switch";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&vdd_sd_dv_pins_default>;
> -		regulator-min-microvolt = <1800000>;
> -		regulator-max-microvolt = <3300000>;
> -		regulator-boot-on;
> -		vin-supply = <&ldo1_reg>;
> -		gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
> -		states = <1800000 0x0>,
> -			 <3300000 0x1>;
> -	};
> -
> -	leds {
> -		bootph-all;
> -		compatible = "gpio-leds";
> -
> -		led-0 {
> -			bootph-all;
> -			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
> -			linux,default-trigger = "heartbeat";
> -			function = LED_FUNCTION_HEARTBEAT;
> -			default-state = "off";
> -		};
> -
> -		led-1 {
> -			bootph-all;
> -			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
> -			linux,default-trigger = "disk-activity";
> -			function = LED_FUNCTION_DISK_ACTIVITY;
> -			default-state = "keep";
> -		};
> -
> -		led-2 {
> -			bootph-all;
> -			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
> -			function = LED_FUNCTION_CPU;
> -		};
> -
> -		led-3 {
> -			bootph-all;
> -			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
> -			function = LED_FUNCTION_LAN;
> -		};
> -
> -		led-4 {
> -			bootph-all;
> -			gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
> -			function = LED_FUNCTION_WLAN;
> -		};
> -	};
> -
> -	gpio_keys: gpio-keys {
> -		compatible = "gpio-keys";
> -		autorepeat;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&usr_button_pins_default>;
> -
> -		usr: button-usr {
> -			label = "User Key";
> -			linux,code = <BTN_0>;
> -			gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
> -		};
> -
> -	};
> -
> -	hdmi0: connector-hdmi {
> -		compatible = "hdmi-connector";
> -		label = "hdmi";
> -		type = "a";
> -		port {
> -			hdmi_connector_in: endpoint {
> -				remote-endpoint = <&it66121_out>;
> -			};
> -		};
> -	};
> -
> -	sound {
> -		compatible = "simple-audio-card";
> -		simple-audio-card,name = "it66121 HDMI";
> -		simple-audio-card,format = "i2s";
> -		simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
> -		simple-audio-card,frame-master = <&hdmi_dailink_master>;
> -
> -		hdmi_dailink_master: simple-audio-card,cpu {
> -			sound-dai = <&mcasp1>;
> -			system-clock-direction-out;
> -		};
> -
> -		simple-audio-card,codec {
> -			sound-dai = <&it66121>;
> -		};
> -	};
> -
> -};
> -
> -&main_pmx0 {
> -	gpio0_pins_default: gpio0-default-pins {
> -		bootph-all;
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
> -			AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
> -			AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
> -			AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
> -			AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
> -			AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
> -			AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
> -			AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
> -			AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
> -			AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
> -			AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
> -			AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
> -			AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
> -			AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
> -		>;
> -	};
> -
> -	vdd_sd_dv_pins_default: vdd-sd-default-pins {
> -		bootph-all;
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
> -		>;
> -	};
> -
> -	usr_button_pins_default: usr-button-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
> -		>;
> -	};
> -
> -	grove_pins_default: grove-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
> -			AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
> -		>;
> -	};
> -
> -	local_i2c_pins_default: local-i2c-default-pins {
> -		bootph-all;
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
> -			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
> -		>;
> -	};
> -
> -	i2c2_1v8_pins_default: i2c2-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
> -			AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
> -		>;
> -	};
> -
> -	mdio0_pins_default: mdio0-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
> -			AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
> -			AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */
> -			AM62X_IOPAD(0x018c, PIN_INPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
> -		>;
> -	};
> -
> -	rgmii1_pins_default: rgmii1-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
> -			AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
> -			AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
> -			AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
> -			AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
> -			AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
> -			AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
> -			AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
> -			AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
> -			AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
> -			AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
> -			AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
> -		>;
> -	};
> -
> -	emmc_pins_default: emmc-default-pins {
> -		bootph-all;
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
> -			AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
> -			AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
> -			AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
> -			AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
> -			AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
> -			AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
> -			AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
> -			AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
> -			AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
> -		>;
> -	};
> -
> -	vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
> -		bootph-all;
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
> -		>;
> -	};
> -
> -	sd_pins_default: sd-default-pins {
> -		bootph-all;
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
> -			AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
> -			AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
> -			AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
> -			AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
> -			AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
> -			AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
> -		>;
> -	};
> -
> -	wifi_pins_default: wifi-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
> -			AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
> -			AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
> -			AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
> -			AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
> -			AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
> -			AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
> -			AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
> -		>;
> -	};
> -
> -	wifi_en_pins_default: wifi-en-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
> -		>;
> -	};
> -
> -	wifi_wlirq_pins_default: wifi-wlirq-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
> -		>;
> -	};
> -
> -	spe_pins_default: spe-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
> -			AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
> -			AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
> -			AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
> -			AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
> -			AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
> -			AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
> -			AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
> -			AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
> -			AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
> -		>;
> -	};
> -
> -	mikrobus_i2c_pins_default: mikrobus-i2c-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
> -			AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
> -		>;
> -	};
> -
> -	mikrobus_uart_pins_default: mikrobus-uart-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */
> -			AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */
> -		>;
> -	};
> -
> -	mikrobus_spi_pins_default: mikrobus-spi-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */
> -			AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */
> -			AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */
> -			AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
> -		>;
> -	};
> -
> -	mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
> -		bootph-all;
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
> -			AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
> -			AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
> -		>;
> -	};
> -
> -	main_uart0_pins_default: main-uart0-default-pins {
> -		bootph-all;
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
> -			AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
> -		>;
> -	};
> -
> -	wifi_debug_uart_pins_default: wifi-debug-uart-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
> -			AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
> -		>;
> -	};
> -
> -	usb1_pins_default: usb1-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
> -		>;
> -	};
> -
> -	pmic_irq_pins_default: pmic-irq-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
> -		>;
> -	};
> -
> -	hdmi_gpio_pins_default: hdmi-gpio-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
> -			AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
> -		>;
> -	};
> -
> -	mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
> -			AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
> -			AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
> -			AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
> -			AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
> -			AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
> -		>;
> -	};
> -
> -	dss0_pins_default: dss0-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
> -			AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
> -			AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
> -			AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
> -			AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
> -			AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
> -			AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
> -			AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
> -			AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
> -			AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
> -			AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
> -			AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
> -			AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
> -			AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
> -			AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
> -			AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
> -			AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
> -			AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
> -			AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
> -			AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
> -			AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
> -			AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
> -			AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
> -			AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
> -			AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
> -			AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
> -			AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
> -			AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
> -		>;
> -	};
> -};
> -
> -&mcu_pmx0 {
> -	i2c_qwiic_pins_default: i2c-qwiic-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
> -			AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
> -		>;
> -	};
> -
> -	gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
> -		>;
> -	};
> -
> -	i2c_csi_pins_default: i2c-csi-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
> -			AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
> -		>;
> -	};
> -
> -	wifi_32k_clk: mcu-clk-out-default-pins {
> -		pinctrl-single,pins = <
> -			AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
> -		>;
> -	};
> -};
> -
> -&a53_opp_table {
> -	/* Requires VDD_CORE to be at 0.85V */
> -	opp-1400000000 {
> -		opp-hz = /bits/ 64 <1400000000>;
> -		opp-supported-hw = <0x01 0x0004>;
> -	};
> -};
> -
> -&wkup_i2c0 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&i2c_csi_pins_default>;
> -	clock-frequency = <400000>;
> -	/* Enable with overlay for camera sensor */
> -};
> -
> -&mcu_i2c0 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&i2c_qwiic_pins_default>;
> -	clock-frequency = <100000>;
> -	status = "okay";
> -};
> -
> -&usbss0 {
> -	bootph-all;
> -	ti,vbus-divider;
> -	status = "okay";
> -};
> -
> -&usb0 {
> -	bootph-all;
> -	dr_mode = "peripheral";
> -};
> -
> -&usbss1 {
> -	ti,vbus-divider;
> -	status = "okay";
> -};
> -
> -&usb1 {
> -	dr_mode = "host";
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&usb1_pins_default>;
> -};
> -
> -&cpsw3g {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>,
> -		    <&gbe_pmx_obsclk>;
> -	assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
> -	assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
> -};
> -
> -&cpsw_port1 {
> -	phy-mode = "rgmii-rxid";
> -	phy-handle = <&cpsw3g_phy0>;
> -};
> -
> -&cpsw_port2 {
> -	phy-mode = "rmii";
> -	phy-handle = <&cpsw3g_phy1>;
> -};
> -
> -&cpsw3g_mdio {
> -	status = "okay";
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mdio0_pins_default>;
> -
> -	cpsw3g_phy0: ethernet-phy at 0 {
> -		reg = <0>;
> -		reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_LOW>;
> -		reset-assert-us = <10000>;
> -		reset-deassert-us = <50000>;
> -	};
> -
> -	cpsw3g_phy1: ethernet-phy at 1 {
> -		reg = <1>;
> -		reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
> -		reset-assert-us = <25>;
> -		reset-deassert-us = <60000>; /* T2 */
> -	};
> -};
> -
> -&main_gpio0 {
> -	bootph-all;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&gpio0_pins_default>;
> -	gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT",	/* 0-2 */
> -		"USR0", "USR1", "USR2", "USR3", "", "", "USR4",	/* 3-9 */
> -		"EEPROM_WP",					/* 10 */
> -		"CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2",	/* 11-12 */
> -		"CC1352P7_BOOT", "CC1352P7_RSTN", "GBE_RSTN", "", "",	/* 13-17 */
> -		"USR_BUTTON", "", "", "", "", "", "", "", "",	/* 18-26 */
> -		"", "", "", "", "", "", "", "", "", "HDMI_INT",	/* 27-36 */
> -		"", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
> -		"", "", "", "", "", "", "", "", "", "", "", "",	/* 43-54 */
> -		"", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
> -		"", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
> -		"", "", "", "", "", "",				/* 79-84 */
> -		"BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK",	/* 85-86 */
> -		"", "", "", "", "";				/* 87-91 */
> -};
> -
> -&main_gpio1 {
> -	bootph-all;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mikrobus_gpio_pins_default>;
> -	gpio-line-names = "", "", "", "", "",			/* 0-4 */
> -		"SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7",	/* 5-7 */
> -		"MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9",		/* 8-9 */
> -		"MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11",	/* 10-11 */
> -		"MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0",	/* 12-13 */
> -		"MIKROBUS_GPIO1_14",				/* 14 */
> -		"", "", "", "", "VDD_3V3_SD", "", "",		/* 15-21 */
> -		"MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23",	/* 22-23 */
> -		"MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25",	/* 24-25 */
> -		"", "", "", "", "", "", "", "", "", "", "", "",	/* 26-37 */
> -		"", "", "", "", "", "", "", "", "", "",		/* 38-47 */
> -		"SD_CD", "SD_VOLT_SEL", "", "";			/* 48-51 */
> -};
> -
> -&main_i2c0 {
> -	bootph-all;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&local_i2c_pins_default>;
> -	clock-frequency = <400000>;
> -	status = "okay";
> -
> -	eeprom at 50 {
> -		compatible = "atmel,24c32";
> -		reg = <0x50>;
> -	};
> -
> -	rtc: rtc at 68 {
> -		compatible = "ti,bq32000";
> -		reg = <0x68>;
> -		interrupt-parent = <&main_gpio0>;
> -		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> -	};
> -
> -	tps65219: pmic at 30 {
> -		bootph-all;
> -		compatible = "ti,tps65219";
> -		reg = <0x30>;
> -		buck1-supply = <&vsys_5v0>;
> -		buck2-supply = <&vsys_5v0>;
> -		buck3-supply = <&vsys_5v0>;
> -		ldo1-supply = <&vdd_3v3>;
> -		ldo2-supply = <&buck2_reg>;
> -		ldo3-supply = <&vdd_3v3>;
> -		ldo4-supply = <&vdd_3v3>;
> -
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pmic_irq_pins_default>;
> -		interrupt-parent = <&gic500>;
> -		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
> -		interrupt-controller;
> -		#interrupt-cells = <1>;
> -
> -		system-power-controller;
> -		ti,power-button;
> -
> -		regulators {
> -			buck1_reg: buck1 {
> -				regulator-name = "VDD_CORE";
> -				regulator-min-microvolt = <850000>;
> -				regulator-max-microvolt = <850000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			buck2_reg: buck2 {
> -				regulator-name = "VDD_1V8";
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <1800000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			buck3_reg: buck3 {
> -				regulator-name = "VDD_1V2";
> -				regulator-min-microvolt = <1200000>;
> -				regulator-max-microvolt = <1200000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			ldo1_reg: ldo1 {
> -				/*
> -				 * Regulator is left as is unused, vdd_sd
> -				 * is controlled via GPIO with bypass config
> -				 * as per the NVM configuration
> -				 */
> -				regulator-name = "VDD_SD_3V3";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-allow-bypass;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			ldo2_reg: ldo2 {
> -				regulator-name = "VDDA_0V85";
> -				regulator-min-microvolt = <850000>;
> -				regulator-max-microvolt = <850000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			ldo3_reg: ldo3 {
> -				regulator-name = "VDDA_1V8";
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <1800000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			ldo4_reg: ldo4 {
> -				regulator-name = "VDD_2V5";
> -				regulator-min-microvolt = <2500000>;
> -				regulator-max-microvolt = <2500000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -		};
> -	};
> -};
> -
> -&main_i2c1 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&grove_pins_default>;
> -	clock-frequency = <100000>;
> -	status = "okay";
> -};
> -
> -&main_i2c2 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&i2c2_1v8_pins_default>;
> -	clock-frequency = <100000>;
> -	status = "okay";
> -
> -	it66121: bridge-hdmi at 4c {
> -		compatible = "ite,it66121";
> -		reg = <0x4c>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&hdmi_gpio_pins_default>;
> -		vcn33-supply = <&vdd_3v3>;
> -		vcn18-supply = <&buck2_reg>;
> -		vrf12-supply = <&buck3_reg>;
> -		reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
> -		interrupt-parent = <&main_gpio0>;
> -		interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
> -		#sound-dai-cells = <0>;
> -
> -		ports {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -
> -			port at 0 {
> -				reg = <0>;
> -
> -				it66121_in: endpoint {
> -					bus-width = <24>;
> -					remote-endpoint = <&dpi1_out>;
> -				};
> -			};
> -
> -			port at 1 {
> -				reg = <1>;
> -
> -				it66121_out: endpoint {
> -					remote-endpoint = <&hdmi_connector_in>;
> -				};
> -			};
> -		};
> -	};
> -};
> -
> -&main_i2c3 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mikrobus_i2c_pins_default>;
> -	clock-frequency = <400000>;
> -	status = "okay";
> -};
> -
> -&main_spi2 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mikrobus_spi_pins_default>;
> -	status = "okay";
> -};
> -
> -&sdhci0 {
> -	bootph-all;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&emmc_pins_default>;
> -	disable-wp;
> -	status = "okay";
> -};
> -
> -&sdhci1 {
> -	/* SD/MMC */
> -	bootph-all;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&sd_pins_default>;
> -
> -	vmmc-supply = <&vdd_3v3_sd>;
> -	vqmmc-supply = <&vdd_sd_dv>;
> -	disable-wp;
> -	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
> -	cd-debounce-delay-ms = <100>;
> -	ti,fails-without-test-cd;
> -	status = "okay";
> -};
> -
> -&sdhci2 {
> -	vmmc-supply = <&wlan_en>;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
> -	non-removable;
> -	ti,fails-without-test-cd;
> -	cap-power-off-card;
> -	keep-power-in-suspend;
> -	assigned-clocks = <&k3_clks 157 158>;
> -	assigned-clock-parents = <&k3_clks 157 160>;
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	status = "okay";
> -
> -	wlcore: wlcore at 2 {
> -		compatible = "ti,wl1807";
> -		reg = <2>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&wifi_wlirq_pins_default>;
> -		interrupt-parent = <&main_gpio0>;
> -		interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
> -	};
> -};
> -
> -&main_uart0 {
> -	bootph-all;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&main_uart0_pins_default>;
> -	status = "okay";
> -};
> -
> -&main_uart1 {
> -	/* Main UART1 is used by TIFS firmware */
> -	status = "reserved";
> -};
> -
> -&main_uart5 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mikrobus_uart_pins_default>;
> -	status = "okay";
> -};
> -
> -&main_uart6 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&wifi_debug_uart_pins_default>;
> -	status = "okay";
> -
> -	mcu {
> -		compatible = "ti,cc1352p7";
> -		reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
> -		vdds-supply = <&vdd_3v3>;
> -	};
> -};
> -
> -&dss {
> -	status = "okay";
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&dss0_pins_default>;
> -};
> -
> -&dss_ports {
> -	/* VP2: DPI Output */
> -	port at 1 {
> -		reg = <1>;
> -
> -		dpi1_out: endpoint {
> -			remote-endpoint = <&it66121_in>;
> -		};
> -	};
> -};
> -
> -&mcasp1 {
> -	status = "okay";
> -	#sound-dai-cells = <0>;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mcasp_hdmi_pins_default>;
> -	auxclk-fs-ratio = <2177>;
> -	op-mode = <0>;          /* MCASP_IIS_MODE */
> -	tdm-slots = <2>;
> -	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
> -	       1 0 0 0
> -	       0 0 0 0
> -	       0 0 0 0
> -	       0 0 0 0
> -	>;
> -	tx-num-evt = <32>;
> -	rx-num-evt = <32>;
> -};
> diff --git a/configs/am62x_beagleplay_a53_defconfig b/configs/am62x_beagleplay_a53_defconfig
> index ec62670d55d6..455dd86b2fc3 100644
> --- a/configs/am62x_beagleplay_a53_defconfig
> +++ b/configs/am62x_beagleplay_a53_defconfig
> @@ -10,7 +10,7 @@ CONFIG_TARGET_AM625_A53_BEAGLEPLAY=y
>  CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
>  CONFIG_DM_GPIO=y
> -CONFIG_DEFAULT_DEVICE_TREE="k3-am625-beagleplay"
> +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-beagleplay"
>  CONFIG_SPL_TEXT_BASE=0x80080000
>  CONFIG_OF_LIBFDT_OVERLAY=y
>  CONFIG_DM_RESET=y
> @@ -58,6 +58,7 @@ CONFIG_CMD_PMIC=y
>  CONFIG_CMD_REGULATOR=y
>  CONFIG_OF_CONTROL=y
>  CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_UPSTREAM=y
>  CONFIG_MULTI_DTB_FIT=y
>  CONFIG_SPL_MULTI_DTB_FIT=y
>  CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
> -- 
> 2.43.0


More information about the U-Boot mailing list