[PATCH 5/5] dts: stm32mp157c-odyssey: add phy-reset-gpios property to ethernet node

Patrice CHOTARD patrice.chotard at foss.st.com
Thu Jun 6 16:39:02 CEST 2024



On 4/28/24 16:24, Heesub Shin wrote:
> In Odyssey board, we should reset the PHY chipset, toggling G0 pin.
> 
> Signed-off-by: Heesub Shin <heesub at gmail.com>
> ---
>  arch/arm/dts/stm32mp157c-odyssey.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts
> index b6210cf8b2..4cc5e07683 100644
> --- a/arch/arm/dts/stm32mp157c-odyssey.dts
> +++ b/arch/arm/dts/stm32mp157c-odyssey.dts
> @@ -75,6 +75,7 @@
>  	phy-mode = "rgmii-id";
>  	max-speed = <1000>;
>  	phy-handle = <&phy0>;
> +	phy-reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
>  	st,ext-phyclk;
>  
>  	mdio0 {

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice


More information about the U-Boot mailing list