[PATCH 4/5] net: dwc_eth_qos: add support for phy-reset-gpios property

[Patrice CHOTARD]

On 4/28/24 16:24, Heesub Shin wrote:
> This commit adds support for a property 'phy-reset-gpios' to reset PHY
> chipset.
> 
> Signed-off-by: Heesub Shin <heesub at gmail.com>
> ---
>  drivers/net/dwc_eth_qos_stm32.c | 23 ++++++++++++++++++++++-
>  1 file changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/dwc_eth_qos_stm32.c b/drivers/net/dwc_eth_qos_stm32.c
> index fbc08bba1d..cffaa10b70 100644
> --- a/drivers/net/dwc_eth_qos_stm32.c
> +++ b/drivers/net/dwc_eth_qos_stm32.c
> @@ -266,6 +266,12 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
>  	if (ret)
>  		dev_warn(dev, "No phy clock provided %d\n", ret);
>  
> +	/* Get reset gpio pin (optional) */
> +	ret = gpio_request_by_name(dev, "phy-reset-gpios", 0,
> +				   &eqos->phy_reset_gpio, GPIOD_IS_OUT);
> +	if (ret)
> +		pr_warn("No phy reset gpio provided: %d\n", ret);
> +
>  	dev_dbg(dev, "%s: OK\n", __func__);
>  
>  	return 0;
> @@ -277,6 +283,21 @@ err_probe:
>  	return ret;
>  }
>  
> +static int eqos_start_resets_stm32(struct udevice *dev)
> +{
> +	struct eqos_priv *eqos = dev_get_priv(dev);
> +
> +	debug("%s(dev=%p):\n", __func__, dev);
> +
> +	if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) {
> +		dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
> +		udelay(2);
> +		dm_gpio_set_value(&eqos->phy_reset_gpio, 0);
> +	}
> +
> +	return 0;
> +}
> +
>  static int eqos_remove_resources_stm32(struct udevice *dev)
>  {
>  	dev_dbg(dev, "%s:\n", __func__);
> @@ -292,7 +313,7 @@ static struct eqos_ops eqos_stm32_ops = {
>  	.eqos_probe_resources = eqos_probe_resources_stm32,
>  	.eqos_remove_resources = eqos_remove_resources_stm32,
>  	.eqos_stop_resets = eqos_null_ops,
> -	.eqos_start_resets = eqos_null_ops,
> +	.eqos_start_resets = eqos_start_resets_stm32,
>  	.eqos_stop_clks = eqos_stop_clks_stm32,
>  	.eqos_start_clks = eqos_start_clks_stm32,
>  	.eqos_calibrate_pads = eqos_null_ops,
Applied to u-boot-stm32/next

Thanks
Patrice