[PATCH] arm: dts: mvebu: Update DTS for Thecus N2350 board

Tony Dinh mibodhi at gmail.com
Tue Jun 11 23:42:44 CEST 2024


Hi Dragan,

On Sun, Jun 9, 2024 at 6:07 PM Dragan Simic <dsimic at manjaro.org> wrote:
>
> Hello Tony,
>
> Please see a few comments below.
>
> On 2024-06-10 02:34, Tony Dinh wrote:
> > - Change the spi-max-frequency to 50000000 (50 Mhz). According to the
> > data sheet[1], the MX25L3205D max frequency is 86 Mhz. Using 50 Mhz in
> > the DTS to ensure u-boot is consistent with what Linux kernel expected.
> > - Update GPIO fan to conform to the latest DT binding.
>
> There's no need for the bullet points, plain prose will do fine instead.

I like bullet points :) All my patch descriptions have bullet points
when there are 2 or more different items.

>
> > [1]
> > MX25L3205D-MX25L1605D-MX25L6405D-Macronix-MX25L3205DM2I-12G-datasheet.pdf
>
> Unless you can provide a real, working URL for the datasheet, this
> reference
> should actually be deleted.

It was my oversight. That should have been this URL:

https://www.macronix.com/Lists/Datasheet/Attachments/8575/MX25L3205D,%203V,%2032Mb,%20v1.5.pdf

I'll wait for Stefan to review the patch and let him decide whether I
should send in a V2 patch or he will modify the commit description.

Thanks for the comments!

All the best,
Tony

>
> > Signed-off-by: Tony Dinh <mibodhi at gmail.com>
> > ---
> >
> >  arch/arm/dts/armada-385-thecus-n2350.dts | 10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts
> > b/arch/arm/dts/armada-385-thecus-n2350.dts
> > index 253cf01130..fdaa444e51 100644
> > --- a/arch/arm/dts/armada-385-thecus-n2350.dts
> > +++ b/arch/arm/dts/armada-385-thecus-n2350.dts
> > @@ -2,7 +2,7 @@
> >  /*
> >   * Device Tree file for Thecus N2350 board
> >   *
> > - * Copyright (C) 2018-2023 Tony Dinh <mibodhi at gmail.com>
> > + * Copyright (C) 2018-2024 Tony Dinh <mibodhi at gmail.com>
> >   * Copyright (C) 2018 Manuel Jung <manuel.jung at hotmail.com>
> >   */
> >
> > @@ -143,9 +143,9 @@
> >       fan {
> >               compatible = "gpio-fan";
> >               gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
> > -             gpio-fan,speed-map = <    0  0
> > -                                     600  1
> > -                                     3000 2 >;
> > +             gpio-fan,speed-map = <    0  0>,
> > +                                     <600  1>,
> > +                                     <3000 2 >;
> >               pinctrl-0 = <&pmx_fan>;
> >               pinctrl-names = "default";
> >       };
> > @@ -415,7 +415,7 @@
> >               compatible = "jedec,spi-nor";
> >               reg = <0>;
> >
> > -             spi-max-frequency = <108000000>;
> > +             spi-max-frequency = <50000000>;
> >               spi-cpha;
> >
> >               partition at 0 {


More information about the U-Boot mailing list