[PATCH] board: sl28: move to OF_UPSTREAM
Michael Walle
michael at walle.cc
Wed Mar 6 17:19:11 CET 2024
Use the new device devicetree files in dts/upstream/ and delete the old
ones. Still keep the -u-boot.dtsi with all u-boot specifics around.
There is one catch and that is fsl-ls1028a-kontron-sl28-var3.dts which
is not available upstream (yet!). For now, the base dts is used for this
variant as this only differ in the compatible and the (human readable)
model name.
Signed-off-by: Michael Walle <michael at walle.cc>
---
I'll send a patch to linux to add the var3.dts, then I'll add the
correct var3 dts again.
---
.../arm/dts/fsl-ls1028a-kontron-sl28-var1.dts | 59 ----
.../arm/dts/fsl-ls1028a-kontron-sl28-var2.dts | 65 ----
.../arm/dts/fsl-ls1028a-kontron-sl28-var3.dts | 15 -
.../arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 47 ---
arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 308 ------------------
board/kontron/sl28/spl.c | 11 +-
configs/kontron_sl28_defconfig | 5 +-
7 files changed, 8 insertions(+), 502 deletions(-)
delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts
delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts
delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts
delete mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts
deleted file mode 100644
index 7cd29ab970..0000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * This is for the network variant 1 which has one ethernet port. It is
- * different than the base variant, which also has one port, but here the
- * port is connected via RGMII. This port is not TSN aware.
- * None of the four SerDes lanes are used by the module, instead they are
- * all led out to the carrier for customer use.
- *
- * Copyright (C) 2021 Michael Walle <michael at walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a-kontron-sl28.dts"
-#include <dt-bindings/net/qca-ar803x.h>
-
-/ {
- model = "Kontron SMARC-sAL28 (4 Lanes)";
- compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
-};
-
-&enetc_mdio_pf3 {
- /* Delete unused phy node */
- /delete-node/ ethernet-phy at 5;
-
- phy0: ethernet-phy at 4 {
- reg = <0x4>;
- eee-broken-1000t;
- eee-broken-100tx;
- qca,clk-out-frequency = <125000000>;
- qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
- qca,keep-pll-enabled;
- vddio-supply = <&vddio>;
-
- vddio: vddio-regulator {
- regulator-name = "VDDIO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddh: vddh-regulator {
- regulator-name = "VDDH";
- };
- };
-};
-
-&enetc_port0 {
- status = "disabled";
- /* Delete the phy-handle to the old phy0 label */
- /delete-property/ phy-handle;
-};
-
-&enetc_port1 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
- status = "okay";
-};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
deleted file mode 100644
index 330e34f933..0000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * This is for the network variant 2 which has two ethernet ports. These
- * ports are connected to the internal switch.
- *
- * Copyright (C) 2021 Michael Walle <michael at walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a-kontron-sl28.dts"
-
-/ {
- model = "Kontron SMARC-sAL28 (TSN-on-module)";
- compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
-};
-
-&enetc_mdio_pf3 {
- phy1: ethernet-phy at 4 {
- reg = <0x4>;
- eee-broken-1000t;
- eee-broken-100tx;
- };
-};
-
-&enetc_port0 {
- status = "disabled";
- /*
- * In the base device tree the PHY at address 5 was assigned for
- * this port. On this module this PHY is connected to a switch
- * port instead. Therefore, delete the phy-handle property here.
- */
- /delete-property/ phy-handle;
-};
-
-&enetc_port2 {
- status = "okay";
-};
-
-&mscc_felix {
- status = "okay";
-};
-
-&mscc_felix_port0 {
- label = "swp0";
- managed = "in-band-status";
- phy-handle = <&phy0>;
- phy-mode = "sgmii";
- status = "okay";
-};
-
-&mscc_felix_port1 {
- label = "swp1";
- managed = "in-band-status";
- phy-handle = <&phy1>;
- phy-mode = "sgmii";
- status = "okay";
-};
-
-&mscc_felix_port4 {
- ethernet = <&enetc_port2>;
- status = "okay";
-};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts
deleted file mode 100644
index 0c8b2af41a..0000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * Copyright (C) 2019 Michael Walle <michael at walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a-kontron-sl28.dts"
-
-/ {
- model = "Kontron SMARC-sAL28 (Single PHY)";
- compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a";
-};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts
deleted file mode 100644
index 9b5e92fb75..0000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * This is for the network variant 4 which has two ethernet ports. It
- * extends the base and provides one more port connected via RGMII.
- *
- * Copyright (C) 2021 Michael Walle <michael at walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a-kontron-sl28.dts"
-#include <dt-bindings/net/qca-ar803x.h>
-
-/ {
- model = "Kontron SMARC-sAL28 (Dual PHY)";
- compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
-};
-
-&enetc_mdio_pf3 {
- phy1: ethernet-phy at 4 {
- reg = <0x4>;
- eee-broken-1000t;
- eee-broken-100tx;
- qca,clk-out-frequency = <125000000>;
- qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
- qca,keep-pll-enabled;
- vddio-supply = <&vddio>;
-
- vddio: vddio-regulator {
- regulator-name = "VDDIO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddh: vddh-regulator {
- regulator-name = "VDDH";
- };
- };
-};
-
-&enetc_port1 {
- phy-handle = <&phy1>;
- phy-mode = "rgmii-id";
- status = "okay";
-};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
deleted file mode 100644
index ab713b4949..0000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * Copyright (C) 2021 Michael Walle <michael at walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Kontron SMARC-sAL28";
- compatible = "kontron,sl28", "fsl,ls1028a";
-
- aliases {
- crypto = &crypto;
- serial0 = &duart0;
- serial1 = &duart1;
- serial2 = &lpuart1;
- spi0 = &fspi;
- spi1 = &dspi2;
- mmc0 = &esdhc1;
- mmc1 = &esdhc;
- rtc0 = &rtc;
- rtc1 = &ftm_alarm0;
- };
-
- buttons0 {
- compatible = "gpio-keys";
-
- power-button {
- interrupts-extended = <&sl28cpld_intc
- 4 IRQ_TYPE_EDGE_BOTH>;
- linux,code = <KEY_POWER>;
- label = "Power";
- };
-
- sleep-button {
- interrupts-extended = <&sl28cpld_intc
- 5 IRQ_TYPE_EDGE_BOTH>;
- linux,code = <KEY_SLEEP>;
- label = "Sleep";
- };
- };
-
- buttons1 {
- compatible = "gpio-keys-polled";
- poll-interval = <200>;
-
- lid-switch {
- linux,input-type = <EV_SW>;
- linux,code = <SW_LID>;
- gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>;
- label = "Lid";
- };
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&can0 {
- status = "okay";
-};
-
-&dspi2 {
- status = "okay";
-};
-
-&duart0 {
- status = "okay";
-};
-
-&duart1 {
- status = "okay";
-};
-
-&enetc_mdio_pf3 {
- phy0: ethernet-phy at 5 {
- reg = <0x5>;
- eee-broken-1000t;
- eee-broken-100tx;
- };
-};
-
-&enetc_port0 {
- phy-handle = <&phy0>;
- phy-mode = "sgmii";
- managed = "in-band-status";
- status = "okay";
-};
-
-&esdhc {
- sd-uhs-sdr104;
- sd-uhs-sdr50;
- sd-uhs-sdr25;
- sd-uhs-sdr12;
- status = "okay";
-};
-
-&esdhc1 {
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- bus-width = <8>;
- status = "okay";
-};
-
-&fspi {
- status = "okay";
-
- flash at 0 {
- compatible = "jedec,spi-nor";
- m25p,fast-read;
- spi-max-frequency = <133000000>;
- reg = <0>;
- /* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
- spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
- spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- reg = <0x000000 0x010000>;
- label = "rcw";
- read-only;
- };
-
- partition at 10000 {
- reg = <0x010000 0x1d0000>;
- label = "failsafe bootloader";
- read-only;
- };
-
- partition at 200000 {
- reg = <0x200000 0x010000>;
- label = "configuration store";
- };
-
- partition at 210000 {
- reg = <0x210000 0x1d0000>;
- label = "bootloader";
- };
-
- partition at 3e0000 {
- reg = <0x3e0000 0x020000>;
- label = "bootloader environment";
- };
- };
- };
-};
-
-&gpio1 {
- gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "TDO", "TCK",
- "", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
- gpio-line-names =
- "", "", "", "", "", "", "TMS", "TDI",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "";
-};
-
-&i2c0 {
- status = "okay";
-
- rtc: rtc at 32 {
- compatible = "microcrystal,rv8803";
- reg = <0x32>;
- };
-
- sl28cpld at 4a {
- compatible = "kontron,sl28cpld";
- reg = <0x4a>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- watchdog at 4 {
- compatible = "kontron,sl28cpld-wdt";
- reg = <0x4>;
- kontron,assert-wdt-timeout-pin;
- };
-
- hwmon at b {
- compatible = "kontron,sl28cpld-fan";
- reg = <0xb>;
- };
-
- sl28cpld_pwm0: pwm at c {
- compatible = "kontron,sl28cpld-pwm";
- reg = <0xc>;
- #pwm-cells = <2>;
- };
-
- sl28cpld_pwm1: pwm at e {
- compatible = "kontron,sl28cpld-pwm";
- reg = <0xe>;
- #pwm-cells = <2>;
- };
-
- sl28cpld_gpio0: gpio at 10 {
- compatible = "kontron,sl28cpld-gpio";
- reg = <0x10>;
- interrupts-extended = <&gpio2 6
- IRQ_TYPE_EDGE_FALLING>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names =
- "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N",
- "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N",
- "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT",
- "GPIO6_TACHIN", "GPIO7";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sl28cpld_gpio1: gpio at 15 {
- compatible = "kontron,sl28cpld-gpio";
- reg = <0x15>;
- interrupts-extended = <&gpio2 6
- IRQ_TYPE_EDGE_FALLING>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names =
- "GPIO8", "GPIO9", "GPIO10", "GPIO11",
- "", "", "", "";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sl28cpld_gpio2: gpio at 1a {
- compatible = "kontron,sl28cpld-gpo";
- reg = <0x1a>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names =
- "LCD0 voltage enable",
- "LCD0 backlight enable",
- "eMMC reset", "LVDS bridge reset",
- "LVDS bridge power-down",
- "SDIO power enable",
- "", "";
- };
-
- sl28cpld_gpio3: gpio at 1b {
- compatible = "kontron,sl28cpld-gpi";
- reg = <0x1b>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names =
- "Power button", "Force recovery", "Sleep",
- "Battery low", "Lid state", "Charging",
- "Charger present", "";
- };
-
- sl28cpld_intc: interrupt-controller at 1c {
- compatible = "kontron,sl28cpld-intc";
- reg = <0x1c>;
- interrupts-extended = <&gpio2 6
- IRQ_TYPE_EDGE_FALLING>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- eeprom at 50 {
- compatible = "atmel,24c32";
- reg = <0x50>;
- pagesize = <32>;
- };
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-
- eeprom at 50 {
- compatible = "atmel,24c32";
- reg = <0x50>;
- pagesize = <32>;
- };
-};
-
-&lpuart1 {
- status = "okay";
-};
diff --git a/board/kontron/sl28/spl.c b/board/kontron/sl28/spl.c
index ffaf517a8b..80acde7495 100644
--- a/board/kontron/sl28/spl.c
+++ b/board/kontron/sl28/spl.c
@@ -47,15 +47,14 @@ int board_fit_config_name_match(const char *name)
switch (variant) {
case 1:
- return strcmp(name, "fsl-ls1028a-kontron-sl28-var1");
+ return strcmp(name, "freescale/fsl-ls1028a-kontron-sl28-var1");
case 2:
- return strcmp(name, "fsl-ls1028a-kontron-sl28-var2");
- case 3:
- return strcmp(name, "fsl-ls1028a-kontron-sl28-var3");
+ return strcmp(name, "freescale/fsl-ls1028a-kontron-sl28-var2");
case 4:
- return strcmp(name, "fsl-ls1028a-kontron-sl28-var4");
+ return strcmp(name, "freescale/fsl-ls1028a-kontron-sl28-var4");
+ case 3:
default:
- return strcmp(name, "fsl-ls1028a-kontron-sl28");
+ return strcmp(name, "freescale/fsl-ls1028a-kontron-sl28");
}
}
diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index 639c5c6ce1..adc1d501ba 100644
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -11,7 +11,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800eff0
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x3e0000
CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-kontron-sl28"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/fsl-ls1028a-kontron-sl28"
CONFIG_SPL_TEXT_BASE=0x18010000
CONFIG_SYS_FSL_SDHC_CLK_DIV=1
CONFIG_OF_LIBFDT_OVERLAY=y
@@ -73,7 +73,8 @@ CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_RNG=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_LIST="fsl-ls1028a-kontron-sl28 fsl-ls1028a-kontron-sl28-var1 fsl-ls1028a-kontron-sl28-var2 fsl-ls1028a-kontron-sl28-var3 fsl-ls1028a-kontron-sl28-var4"
+CONFIG_OF_UPSTREAM=y
+CONFIG_OF_LIST="freescale/fsl-ls1028a-kontron-sl28 freescale/fsl-ls1028a-kontron-sl28-var1 freescale/fsl-ls1028a-kontron-sl28-var2 freescale/fsl-ls1028a-kontron-sl28-var4"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
--
2.39.2
More information about the U-Boot
mailing list