[PATCH v4] board: rockchip: add Rockchip Toybrick TB-RK3588X board

Kever Yang kever.yang at rock-chips.com
Wed Mar 13 11:41:19 CET 2024


On 2024/3/11 11:57, Elon Zhang wrote:
> TB-RK3588X board is a Rockchip Toybrick RK3588 based development board.
>
> Specification:
> 	Rockchip Rk3588 SoC
> 	4x ARM Cortex-A76, 4x ARM Cortex-A55
> 	8/16GB Memory LPDDR4x
> 	Mali G610MC4 GPU
> 	2× MIPI-CSI0 Connector
> 	1x 2Lanes PCIe3.0 Connector
> 	1x SATA3.0 Connector
> 	32GB eMMC Module
> 	2x USB 2.0, 2x USB 3.0
> 	1x HDMI Output, 1x HDMI Input
> 	2x Ethernet Port
>
> Functions work normally:
> 	[1] USB2.0 Host
> 	[2] Ethernet0 with PHY RTL8211F
>
> More information can be obtained from the following websites:
> 	[1] https://t.rock-chips.com/en/wiki/EN/tb-rk3588x_en/index.html
> 	[2] http://t.rock-chips.com/
>
> Kernel commits:
> 	8ffe365f8dc7 ("arm64: dts: rockchip: Add devicetree support for TB-RK3588X board")
> 	7140387ff49d ("dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X")
>
> Reviewed-by: Weizhao Ouyang <weizhao.ouyang at arm.com>
> Signed-off-by: Elon Zhang <zhangzj at rock-chips.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> Changes since v3:
>    - unsigned int ret -> int ret of fdtdec_add_reserved_memory()
>
> Changes since v2:
>    - Sync dts file from upstream linux kernel
>
> Changes since v1:
>    - Remove BOARD_SPECIFIC_OPTIONS in board Kconfig
> ---
>   arch/arm/dts/rk3588-toybrick-x0-u-boot.dtsi   |  12 +
>   arch/arm/dts/rk3588-toybrick-x0.dts           | 688 ++++++++++++++++++
>   arch/arm/mach-rockchip/rk3588/Kconfig         |  25 +
>   board/rockchip/toybrick_rk3588/Kconfig        |  12 +
>   board/rockchip/toybrick_rk3588/MAINTAINERS    |   8 +
>   board/rockchip/toybrick_rk3588/Makefile       |   6 +
>   .../toybrick_rk3588/toybrick-rk3588.c         |  39 +
>   configs/toybrick-rk3588_defconfig             |  82 +++
>   doc/board/rockchip/rockchip.rst               |   1 +
>   include/configs/toybrick_rk3588.h             |  15 +
>   10 files changed, 888 insertions(+)
>   create mode 100644 arch/arm/dts/rk3588-toybrick-x0-u-boot.dtsi
>   create mode 100644 arch/arm/dts/rk3588-toybrick-x0.dts
>   create mode 100644 board/rockchip/toybrick_rk3588/Kconfig
>   create mode 100644 board/rockchip/toybrick_rk3588/MAINTAINERS
>   create mode 100644 board/rockchip/toybrick_rk3588/Makefile
>   create mode 100644 board/rockchip/toybrick_rk3588/toybrick-rk3588.c
>   create mode 100644 configs/toybrick-rk3588_defconfig
>   create mode 100644 include/configs/toybrick_rk3588.h
>
> diff --git a/arch/arm/dts/rk3588-toybrick-x0-u-boot.dtsi b/arch/arm/dts/rk3588-toybrick-x0-u-boot.dtsi
> new file mode 100644
> index 0000000000..1aeb5410e4
> --- /dev/null
> +++ b/arch/arm/dts/rk3588-toybrick-x0-u-boot.dtsi
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include "rk3588-u-boot.dtsi"
> +
> +/ {
> +	chosen {
> +		u-boot,spl-boot-order = "same-as-spl", &sdhci;
> +	};
> +};
> diff --git a/arch/arm/dts/rk3588-toybrick-x0.dts b/arch/arm/dts/rk3588-toybrick-x0.dts
> new file mode 100644
> index 0000000000..9090c5c99f
> --- /dev/null
> +++ b/arch/arm/dts/rk3588-toybrick-x0.dts
> @@ -0,0 +1,688 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3588.dtsi"
> +
> +/ {
> +	model = "Rockchip Toybrick TB-RK3588X Board";
> +	compatible = "rockchip,rk3588-toybrick-x0", "rockchip,rk3588";
> +
> +	aliases {
> +		mmc0 = &sdhci;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	adc-keys {
> +		compatible = "adc-keys";
> +		io-channels = <&saradc 1>;
> +		io-channel-names = "buttons";
> +		keyup-threshold-microvolt = <1800000>;
> +		poll-interval = <100>;
> +
> +		button-vol-up {
> +			label = "Volume Up";
> +			linux,code = <KEY_VOLUMEUP>;
> +			press-threshold-microvolt = <17000>;
> +		};
> +
> +		button-vol-down {
> +			label = "Volume Down";
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			press-threshold-microvolt = <417000>;
> +		};
> +
> +		button-menu {
> +			label = "Menu";
> +			linux,code = <KEY_MENU>;
> +			press-threshold-microvolt = <890000>;
> +		};
> +
> +		button-escape {
> +			label = "Escape";
> +			linux,code = <KEY_ESC>;
> +			press-threshold-microvolt = <1235000>;
> +		};
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		power-supply = <&vcc12v_dcin>;
> +		pwms = <&pwm2 0 25000 0>;
> +	};
> +
> +	pcie20_avdd0v85: pcie20-avdd0v85-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "pcie20_avdd0v85";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <850000>;
> +		regulator-max-microvolt = <850000>;
> +		vin-supply = <&vdd_0v85_s0>;
> +	};
> +
> +	pcie20_avdd1v8: pcie20-avdd1v8-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "pcie20_avdd1v8";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&avcc_1v8_s0>;
> +	};
> +
> +	pcie30_avdd0v75: pcie30-avdd0v75-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "pcie30_avdd0v75";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <750000>;
> +		regulator-max-microvolt = <750000>;
> +		vin-supply = <&avdd_0v75_s0>;
> +	};
> +
> +	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "pcie30_avdd1v8";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&avcc_1v8_s0>;
> +	};
> +
> +	vcc12v_dcin: vcc12v-dcin-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc12v_dcin";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +	};
> +
> +	vcc5v0_host: vcc5v0-host-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc5v0_host_en>;
> +		regulator-name = "vcc5v0_host";
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_usb>;
> +	};
> +
> +	vcc5v0_sys: vcc5v0-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_usbdcin";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vcc5v0_usb: vcc5v0-usb-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_usb";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_usbdcin>;
> +	};
> +
> +	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_1v1_nldo_s3";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1100000>;
> +		regulator-max-microvolt = <1100000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +};
> +
> +&combphy0_ps {
> +	status = "okay";
> +};
> +
> +&combphy2_psu {
> +	status = "okay";
> +};
> +
> +&cpu_b0 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b1 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b2 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_b3 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&gmac0 {
> +	clock_in_out = "output";
> +	phy-handle = <&rgmii_phy>;
> +	phy-mode = "rgmii-rxid";
> +	pinctrl-0 = <&gmac0_miim
> +		     &gmac0_tx_bus2
> +		     &gmac0_rx_bus2
> +		     &gmac0_rgmii_clk
> +		     &gmac0_rgmii_bus>;
> +	pinctrl-names = "default";
> +	rx_delay = <0x00>;
> +	tx_delay = <0x43>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0m2_xfer>;
> +	status = "okay";
> +
> +	vdd_cpu_big0_s0: regulator at 42 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x42>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big0_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	vdd_cpu_big1_s0: regulator at 43 {
> +		compatible = "rockchip,rk8603", "rockchip,rk8602";
> +		reg = <0x43>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big1_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	hym8563: rtc at 51 {
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		#clock-cells = <0>;
> +		clock-output-names = "hym8563";
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hym8563_int>;
> +		wakeup-source;
> +	};
> +};
> +
> +&mdio0 {
> +	rgmii_phy: ethernet-phy at 1 {
> +		/* RTL8211F */
> +		compatible = "ethernet-phy-id001c.c916";
> +		reg = <0x1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&rtl8211f_rst>;
> +		reset-assert-us = <20000>;
> +		reset-deassert-us = <100000>;
> +		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
> +	};
> +};
> +
> +&pinctrl {
> +	rtl8211f {
> +		rtl8211f_rst: rtl8211f-rst {
> +			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +	};
> +
> +	hym8563 {
> +		hym8563_int: hym8563-int {
> +			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
> +	usb {
> +		vcc5v0_host_en: vcc5v0-host-en {
> +			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&pwm2 {
> +	status = "okay";
> +};
> +
> +&saradc {
> +	vref-supply = <&vcc_1v8_s0>;
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&spi2 {
> +	assigned-clocks = <&cru CLK_SPI2>;
> +	assigned-clock-rates = <200000000>;
> +	num-cs = <1>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
> +	status = "okay";
> +
> +	pmic at 0 {
> +		compatible = "rockchip,rk806";
> +		reg = <0x0>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
> +			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
> +		spi-max-frequency = <1000000>;
> +		system-power-controller;
> +
> +		vcc1-supply = <&vcc5v0_sys>;
> +		vcc2-supply = <&vcc5v0_sys>;
> +		vcc3-supply = <&vcc5v0_sys>;
> +		vcc4-supply = <&vcc5v0_sys>;
> +		vcc5-supply = <&vcc5v0_sys>;
> +		vcc6-supply = <&vcc5v0_sys>;
> +		vcc7-supply = <&vcc5v0_sys>;
> +		vcc8-supply = <&vcc5v0_sys>;
> +		vcc9-supply = <&vcc5v0_sys>;
> +		vcc10-supply = <&vcc5v0_sys>;
> +		vcc11-supply = <&vcc_2v0_pldo_s3>;
> +		vcc12-supply = <&vcc5v0_sys>;
> +		vcc13-supply = <&vcc_1v1_nldo_s3>;
> +		vcc14-supply = <&vcc_1v1_nldo_s3>;
> +		vcca-supply = <&vcc5v0_sys>;
> +
> +		rk806_dvs1_null: dvs1-null-pins {
> +			pins = "gpio_pwrctrl1";
> +			function = "pin_fun0";
> +		};
> +
> +		rk806_dvs2_null: dvs2-null-pins {
> +			pins = "gpio_pwrctrl2";
> +			function = "pin_fun0";
> +		};
> +
> +		rk806_dvs3_null: dvs3-null-pins {
> +			pins = "gpio_pwrctrl3";
> +			function = "pin_fun0";
> +		};
> +
> +		regulators {
> +			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
> +				regulator-name = "vdd_gpu_s0";
> +				regulator-boot-on;
> +				regulator-enable-ramp-delay = <400>;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
> +				regulator-name = "vdd_cpu_lit_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_log_s0: dcdc-reg3 {
> +				regulator-name = "vdd_log_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <675000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-ramp-delay = <12500>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +
> +			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
> +				regulator-name = "vdd_vdenc_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-init-microvolt = <750000>;
> +				regulator-ramp-delay = <12500>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_ddr_s0: dcdc-reg5 {
> +				regulator-name = "vdd_ddr_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <675000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-ramp-delay = <12500>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <850000>;
> +				};
> +			};
> +
> +			vdd2_ddr_s3: dcdc-reg6 {
> +				regulator-name = "vdd2_ddr_s3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc_2v0_pldo_s3: dcdc-reg7 {
> +				regulator-name = "vdd_2v0_pldo_s3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <2000000>;
> +				regulator-max-microvolt = <2000000>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <2000000>;
> +				};
> +			};
> +
> +			vcc_3v3_s3: dcdc-reg8 {
> +				regulator-name = "vcc_3v3_s3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vddq_ddr_s0: dcdc-reg9 {
> +				regulator-name = "vddq_ddr_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8_s3: dcdc-reg10 {
> +				regulator-name = "vcc_1v8_s3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			avcc_1v8_s0: pldo-reg1 {
> +				regulator-name = "avcc_1v8_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8_s0: pldo-reg2 {
> +				regulator-name = "vcc_1v8_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			avdd_1v2_s0: pldo-reg3 {
> +				regulator-name = "avdd_1v2_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v3_s0: pldo-reg4 {
> +				regulator-name = "vcc_3v3_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vccio_sd_s0: pldo-reg5 {
> +				regulator-name = "vccio_sd_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			pldo6_s3: pldo-reg6 {
> +				regulator-name = "pldo6_s3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vdd_0v75_s3: nldo-reg1 {
> +				regulator-name = "vdd_0v75_s3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +
> +			vdd_ddr_pll_s0: nldo-reg2 {
> +				regulator-name = "vdd_ddr_pll_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <850000>;
> +				};
> +			};
> +
> +			avdd_0v75_s0: nldo-reg3 {
> +				regulator-name = "avdd_0v75_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <837500>;
> +				regulator-max-microvolt = <837500>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_0v85_s0: nldo-reg4 {
> +				regulator-name = "vdd_0v85_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_0v75_s0: nldo-reg5 {
> +				regulator-name = "vdd_0v75_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&u2phy2 {
> +	status = "okay";
> +};
> +
> +&u2phy2_host {
> +	phy-supply = <&vcc5v0_host>;
> +	status = "okay";
> +};
> +
> +&u2phy3 {
> +	status = "okay";
> +};
> +
> +&u2phy3_host {
> +	phy-supply = <&vcc5v0_host>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-0 = <&uart2m0_xfer>;
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig
> index a2193fbd41..ff6c12903d 100644
> --- a/arch/arm/mach-rockchip/rk3588/Kconfig
> +++ b/arch/arm/mach-rockchip/rk3588/Kconfig
> @@ -155,6 +155,30 @@ config TARGET_TURINGRK1_RK3588
>   	  Gigabit Ethernet
>   	  Size: 69.6mm x 45mm (260-pin SO-DIMM connector)
>   
> +config TARGET_TOYBRICK_RK3588
> +	bool "Toybrick TB-RK3588X board"
> +	select BOARD_LATE_INIT
> +	help
> +	  Rockchip Toybrick TB-RK3588X is a Rockchip RK3588 based development board.
> +	  TB-RK3588X adopts core board and mainboard design. The core board is connected
> +	  with the mainboard through the MXM314Pin standard interface, which can form
> +	  a complete industry development board.
> +
> +	  Specifications:
> +
> +	  Rockchip RK3588 SoC
> +	  4x ARM Cortex-A76, 4x ARM Cortex-A55
> +	  8/16GB Memory LPDDR4x
> +	  Mali G610MC4 GPU
> +	  2× MIPI-CSI0 Connector
> +	  1x 2Lanes PCIe3.0 Connector
> +	  1x SATA3.0 Connector
> +	  32GB eMMC Module
> +	  2x USB2.0, 2x USB3.0
> +	  1x HDMI Output, 1x HDMI Input
> +	  2x Ethernet Port
> +
> +
>   config ROCKCHIP_BOOT_MODE_REG
>   	default 0xfd588080
>   
> @@ -174,5 +198,6 @@ source board/turing/turing-rk1-rk3588/Kconfig
>   source board/rockchip/evb_rk3588/Kconfig
>   source board/radxa/rock5a-rk3588s/Kconfig
>   source board/radxa/rock5b-rk3588/Kconfig
> +source board/rockchip/toybrick_rk3588/Kconfig
>   
>   endif
> diff --git a/board/rockchip/toybrick_rk3588/Kconfig b/board/rockchip/toybrick_rk3588/Kconfig
> new file mode 100644
> index 0000000000..8e781a18d9
> --- /dev/null
> +++ b/board/rockchip/toybrick_rk3588/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_TOYBRICK_RK3588
> +
> +config SYS_BOARD
> +	default "toybrick_rk3588"
> +
> +config SYS_VENDOR
> +	default "rockchip"
> +
> +config SYS_CONFIG_NAME
> +	default "toybrick_rk3588"
> +
> +endif
> diff --git a/board/rockchip/toybrick_rk3588/MAINTAINERS b/board/rockchip/toybrick_rk3588/MAINTAINERS
> new file mode 100644
> index 0000000000..cd4401c24f
> --- /dev/null
> +++ b/board/rockchip/toybrick_rk3588/MAINTAINERS
> @@ -0,0 +1,8 @@
> +TOYBRICK-RK3588
> +M:	Elon Zhang <zhangzj at rock-chips.com>
> +S:	Maintained
> +F:	board/rockchip/toybrick_rk3588
> +F:	include/configs/toybrick_rk3588.h
> +F:	configs/toybrick-rk3588_defconfig
> +F:	arch/arm/dts/rk3588-toybrick-x0.dts
> +F:	arch/arm/dts/rk3588-toybrick-x0-u-boot.dtsi
> diff --git a/board/rockchip/toybrick_rk3588/Makefile b/board/rockchip/toybrick_rk3588/Makefile
> new file mode 100644
> index 0000000000..75d4d9438f
> --- /dev/null
> +++ b/board/rockchip/toybrick_rk3588/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier:     GPL-2.0+
> +#
> +# Copyright (c) 2024 Rockchip Electronics Co,. Ltd.
> +#
> +
> +obj-y += toybrick-rk3588.o
> diff --git a/board/rockchip/toybrick_rk3588/toybrick-rk3588.c b/board/rockchip/toybrick_rk3588/toybrick-rk3588.c
> new file mode 100644
> index 0000000000..e3217f70b5
> --- /dev/null
> +++ b/board/rockchip/toybrick_rk3588/toybrick-rk3588.c
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2024 Rockchip Electronics Co,. Ltd.
> + */
> +
> +#include <fdtdec.h>
> +#include <fdt_support.h>
> +
> +#ifdef CONFIG_OF_BOARD_SETUP
> +static int rk3588_add_reserved_memory_fdt_nodes(void *new_blob)
> +{
> +	struct fdt_memory gap1 = {
> +		.start = 0x3fc000000,
> +		.end = 0x3fc4fffff,
> +	};
> +	struct fdt_memory gap2 = {
> +		.start = 0x3fff00000,
> +		.end = 0x3ffffffff,
> +	};
> +	unsigned long flags = FDTDEC_RESERVED_MEMORY_NO_MAP;
> +	int ret;
> +
> +	/*
> +	 * Inject the reserved-memory nodes into the DTS
> +	 */
> +	ret = fdtdec_add_reserved_memory(new_blob, "gap1", &gap1,  NULL, 0,
> +					 NULL, flags);
> +	if (ret)
> +		return ret;
> +
> +	return fdtdec_add_reserved_memory(new_blob, "gap2", &gap2,  NULL, 0,
> +					  NULL, flags);
> +}
> +
> +int ft_board_setup(void *blob, struct bd_info *bd)
> +{
> +	return rk3588_add_reserved_memory_fdt_nodes(blob);
> +}
> +#endif
> diff --git a/configs/toybrick-rk3588_defconfig b/configs/toybrick-rk3588_defconfig
> new file mode 100644
> index 0000000000..0b6016955d
> --- /dev/null
> +++ b/configs/toybrick-rk3588_defconfig
> @@ -0,0 +1,82 @@
> +CONFIG_ARM=y
> +CONFIG_SKIP_LOWLEVEL_INIT=y
> +CONFIG_COUNTER_FREQUENCY=24000000
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_TEXT_BASE=0x00a00000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=2
> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
> +CONFIG_ENV_SIZE=0x1f000
> +CONFIG_DEFAULT_DEVICE_TREE="rk3588-toybrick-x0"
> +CONFIG_ROCKCHIP_RK3588=y
> +CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
> +CONFIG_SPL_SERIAL=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_TARGET_TOYBRICK_RK3588=y
> +CONFIG_SPL_STACK=0x400000
> +CONFIG_DEBUG_UART_BASE=0xFEB50000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SYS_LOAD_ADDR=0xc00800
> +CONFIG_DEBUG_UART=y
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_FIT_SIGNATURE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_LEGACY_IMAGE_FORMAT=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-toybrick-x0.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_MAX_SIZE=0x40000
> +CONFIG_SPL_PAD_TO=0x7f8000
> +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> +CONFIG_SPL_BSS_START_ADDR=0x4000000
> +CONFIG_SPL_BSS_MAX_SIZE=0x4000
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +# CONFIG_SPL_DOS_PARTITION is not set
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_LIVE=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_SPL_CLK=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MISC=y
> +CONFIG_SUPPORT_EMMC_RPMB=y
> +CONFIG_MMC_HS400_ES_SUPPORT=y
> +CONFIG_MMC_HS400_SUPPORT=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_SDMA=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DWC_ETH_QOS=y
> +CONFIG_DWC_ETH_QOS_ROCKCHIP=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_SPL_RAM=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYS_NS16550_MEM32=y
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_ERRNO_STR=y
> diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
> index e23ca4231c..d5b6ee956e 100644
> --- a/doc/board/rockchip/rockchip.rst
> +++ b/doc/board/rockchip/rockchip.rst
> @@ -120,6 +120,7 @@ List of mainline supported Rockchip boards:
>        - Turing Machines RK1 (turing-rk1-rk3588)
>        - Radxa ROCK 5A (rock5a-rk3588s)
>        - Radxa ROCK 5B (rock5b-rk3588)
> +     - Rockchip Toybrick TB-RK3588X (toybrick-rk3588)
>        - Xunlong Orange Pi 5 (orangepi-5-rk3588s)
>        - Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588)
>   
> diff --git a/include/configs/toybrick_rk3588.h b/include/configs/toybrick_rk3588.h
> new file mode 100644
> index 0000000000..faa2e6c19c
> --- /dev/null
> +++ b/include/configs/toybrick_rk3588.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
> + */
> +
> +#ifndef __TOYBRICK_RK3588_H
> +#define __TOYBRICK_RK3588_H
> +
> +#include <configs/rk3588_common.h>
> +
> +#define ROCKCHIP_DEVICE_SETTINGS \
> +		"stdout=serial,vidconsole\0" \
> +		"stderr=serial,vidconsole\0"
> +
> +#endif


More information about the U-Boot mailing list