[PATCH 2/3] configs: imx93-phyboard-segin: Add USB support.

[Primoz Fiser]

Hi Mathieu,

On 18. 03. 24 18:16, Mathieu Othacehe wrote:
> Enable the `usb` command and some USB drivers.
> 

I would rephrase commit msg to something like this:

Add USB support by enabling `usb` command and required USB drivers.


> Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
> ---
>  configs/imx93-phyboard-segin_defconfig | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-phyboard-segin_defconfig
> index 24f9bd553aa..5acb987b817 100644
> --- a/configs/imx93-phyboard-segin_defconfig
> +++ b/configs/imx93-phyboard-segin_defconfig
> @@ -23,6 +23,7 @@ CONFIG_SPL_STACK=0x20519dd0
>  CONFIG_SPL=y
>  CONFIG_ENV_OFFSET_REDUND=0x720000
>  CONFIG_CMD_DEKBLOB=y
> +CONFIG_CMD_USB=y

Can you run

$ make savedefconfig && cp defconfig configs/imx93-phyboard-segin_defconfig

to re-order CONFIG_CMD_USB please?


>  CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
>  CONFIG_SYS_LOAD_ADDR=0x80400000
>  CONFIG_SYS_MEMTEST_START=0x80000000
> @@ -132,6 +133,13 @@ CONFIG_SPL_SYSRESET=y
>  CONFIG_SYSRESET_WATCHDOG=y
>  CONFIG_DM_THERMAL=y
>  CONFIG_IMX_TMU=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="FSL"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
> +CONFIG_CI_UDC=y
>  CONFIG_ULP_WATCHDOG=y
>  CONFIG_LZO=y
>  CONFIG_BZIP2=y


-- 
Primoz Fiser                    | phone: +386-41-540-545
<tel:+386-41-390-545> |
---------------------------------------------------------|
Norik systems d.o.o.            | https://www.norik.com
<https://www.norik.com>  |
Your embedded software partner  | email: info at norik.com
<mailto:info at norik.com> |
Slovenia, EU                    | phone: +386-41-540-545
<tel:+386-41-540-545> |