[PATCH 2/3] configs: imx93-phyboard-segin: Add USB support.

[Wadim Egorov]

Am 19.03.24 um 14:58 schrieb Marek Vasut:
> On 3/19/24 9:39 AM, Wadim Egorov wrote:
>>
>> Am 18.03.24 um 22:48 schrieb Marek Vasut:
>>> On 3/18/24 6:16 PM, Mathieu Othacehe wrote:
>>>> Enable the `usb` command and some USB drivers.
>>>>
>>>> Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
>>>> ---
>>>>   configs/imx93-phyboard-segin_defconfig | 8 ++++++++
>>>>   1 file changed, 8 insertions(+)
>>>>
>>>> diff --git a/configs/imx93-phyboard-segin_defconfig 
>>>> b/configs/imx93-phyboard-segin_defconfig
>>>> index 24f9bd553aa..5acb987b817 100644
>>>> --- a/configs/imx93-phyboard-segin_defconfig
>>>> +++ b/configs/imx93-phyboard-segin_defconfig
>>>> @@ -23,6 +23,7 @@ CONFIG_SPL_STACK=0x20519dd0
>>>>   CONFIG_SPL=y
>>>>   CONFIG_ENV_OFFSET_REDUND=0x720000
>>>>   CONFIG_CMD_DEKBLOB=y
>>>> +CONFIG_CMD_USB=y
>>>>   CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
>>>>   CONFIG_SYS_LOAD_ADDR=0x80400000
>>>>   CONFIG_SYS_MEMTEST_START=0x80000000
>>>> @@ -132,6 +133,13 @@ CONFIG_SPL_SYSRESET=y
>>>>   CONFIG_SYSRESET_WATCHDOG=y
>>>>   CONFIG_DM_THERMAL=y
>>>>   CONFIG_IMX_TMU=y
>>>> +CONFIG_USB=y
>>>> +CONFIG_USB_EHCI_HCD=y
>>>> +CONFIG_USB_GADGET=y
>>>> +CONFIG_USB_GADGET_MANUFACTURER="FSL"
>>>> +CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
>>>> +CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
>>>
>>> Shouldn't this by Phytec or similar USB IDs ?
>> AFAIK, PHYTEC does not have its own IDs registered yet. So the 
>> freescale IDs should be fine.
>
> Manufacturer can still be Phytec , can it not ?

Yes, we can use PHYTEC for manufacturer.