[PATCH 2/3] configs: imx93-phyboard-segin: Add USB support.

[Marek Vasut]

On 3/19/24 9:39 AM, Wadim Egorov wrote:
> 
> Am 18.03.24 um 22:48 schrieb Marek Vasut:
>> On 3/18/24 6:16 PM, Mathieu Othacehe wrote:
>>> Enable the `usb` command and some USB drivers.
>>>
>>> Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
>>> ---
>>>   configs/imx93-phyboard-segin_defconfig | 8 ++++++++
>>>   1 file changed, 8 insertions(+)
>>>
>>> diff --git a/configs/imx93-phyboard-segin_defconfig 
>>> b/configs/imx93-phyboard-segin_defconfig
>>> index 24f9bd553aa..5acb987b817 100644
>>> --- a/configs/imx93-phyboard-segin_defconfig
>>> +++ b/configs/imx93-phyboard-segin_defconfig
>>> @@ -23,6 +23,7 @@ CONFIG_SPL_STACK=0x20519dd0
>>>   CONFIG_SPL=y
>>>   CONFIG_ENV_OFFSET_REDUND=0x720000
>>>   CONFIG_CMD_DEKBLOB=y
>>> +CONFIG_CMD_USB=y
>>>   CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
>>>   CONFIG_SYS_LOAD_ADDR=0x80400000
>>>   CONFIG_SYS_MEMTEST_START=0x80000000
>>> @@ -132,6 +133,13 @@ CONFIG_SPL_SYSRESET=y
>>>   CONFIG_SYSRESET_WATCHDOG=y
>>>   CONFIG_DM_THERMAL=y
>>>   CONFIG_IMX_TMU=y
>>> +CONFIG_USB=y
>>> +CONFIG_USB_EHCI_HCD=y
>>> +CONFIG_USB_GADGET=y
>>> +CONFIG_USB_GADGET_MANUFACTURER="FSL"
>>> +CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
>>> +CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
>>
>> Shouldn't this by Phytec or similar USB IDs ?
> AFAIK, PHYTEC does not have its own IDs registered yet. So the freescale 
> IDs should be fine.

Manufacturer can still be Phytec , can it not ?