[PATCH 2/3] configs: imx93-phyboard-segin: Add USB support.

[Wadim Egorov]

Am 18.03.24 um 22:48 schrieb Marek Vasut:
> On 3/18/24 6:16 PM, Mathieu Othacehe wrote:
>> Enable the `usb` command and some USB drivers.
>>
>> Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
>> ---
>>   configs/imx93-phyboard-segin_defconfig | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/configs/imx93-phyboard-segin_defconfig 
>> b/configs/imx93-phyboard-segin_defconfig
>> index 24f9bd553aa..5acb987b817 100644
>> --- a/configs/imx93-phyboard-segin_defconfig
>> +++ b/configs/imx93-phyboard-segin_defconfig
>> @@ -23,6 +23,7 @@ CONFIG_SPL_STACK=0x20519dd0
>>   CONFIG_SPL=y
>>   CONFIG_ENV_OFFSET_REDUND=0x720000
>>   CONFIG_CMD_DEKBLOB=y
>> +CONFIG_CMD_USB=y
>>   CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
>>   CONFIG_SYS_LOAD_ADDR=0x80400000
>>   CONFIG_SYS_MEMTEST_START=0x80000000
>> @@ -132,6 +133,13 @@ CONFIG_SPL_SYSRESET=y
>>   CONFIG_SYSRESET_WATCHDOG=y
>>   CONFIG_DM_THERMAL=y
>>   CONFIG_IMX_TMU=y
>> +CONFIG_USB=y
>> +CONFIG_USB_EHCI_HCD=y
>> +CONFIG_USB_GADGET=y
>> +CONFIG_USB_GADGET_MANUFACTURER="FSL"
>> +CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
>> +CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
>
> Shouldn't this by Phytec or similar USB IDs ?
AFAIK, PHYTEC does not have its own IDs registered yet. So the freescale 
IDs should be fine.