[PATCH] ARM: stm32: Default dfu_alt_info for STM32MP13xx SPI NOR
Marek Vasut
marex at denx.de
Tue Mar 26 18:08:09 CET 2024
On 3/19/24 11:22 AM, Patrice CHOTARD wrote:
>
>
> On 3/19/24 03:44, Marek Vasut wrote:
>> Define dfu_alt_info with SPI NOR layout to make it easy to
>> install or update bootloader in the SPI NOR using dfu-util.
>>
>> Use the following U-Boot commands to start DFU mode:
>> "
>> => sf probe && dfu 0 mtd
>> "
>>
>> Use the following dfu-util invocation on Host PC to install binaries:
>> "
>> $ dfu-util -w -a 0 -D build/stm32mp1/release/tf-a-stm32mp135f-dhcor-dhsbc.stm32
>> $ dfu-util -w -a 1 -D build/stm32mp1/release/tf-a-stm32mp135f-dhcor-dhsbc.stm32
>> $ dfu-util -w -a 2 -D build/stm32mp1/release/fip.bin
>> "
>>
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> ---
>> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
>> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> Cc: Tom Rini <trini at konsulko.com>
>> Cc: u-boot at dh-electronics.com
>> Cc: u-boot at lists.denx.de
>> Cc: uboot-stm32 at st-md-mailman.stormreply.com
>> ---
>> include/configs/stm32mp13_common.h | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/include/configs/stm32mp13_common.h b/include/configs/stm32mp13_common.h
>> index 5b0658ced92..d6e4f8fd915 100644
>> --- a/include/configs/stm32mp13_common.h
>> +++ b/include/configs/stm32mp13_common.h
>> @@ -63,6 +63,7 @@
>> "fi;\0"
>>
>> #define STM32MP_EXTRA \
>> + "dfu_alt_info=mtd nor0=fsbl1 raw 0x0 0x40000;fsbl2 raw 0x40000 0x40000;uboot raw 0x80000 0x160000\0" \
>> "env_check=if env info -p -d -q; then env save; fi\0" \
>> "boot_net_usb_start=true\0"
>>
>
>
> Hi Marek
>
> On our STM32 board, the dfu_alt_info is build dynamically, we have CONFIG_SET_DFU_ALT_INFO enable
> Can you add the dfu_alt_info in a specific stm32mp13_dhxx.common.h instead ?
You can drop this patch.
More information about the U-Boot
mailing list