[PATCH] ARM: stm32: Default dfu_alt_info for STM32MP13xx SPI NOR

[Patrice CHOTARD]

On 3/26/24 18:08, Marek Vasut wrote:
> On 3/19/24 11:22 AM, Patrice CHOTARD wrote:
>>
>>
>> On 3/19/24 03:44, Marek Vasut wrote:
>>> Define dfu_alt_info with SPI NOR layout to make it easy to
>>> install or update bootloader in the SPI NOR using dfu-util.
>>>
>>> Use the following U-Boot commands to start DFU mode:
>>> "
>>> => sf probe && dfu 0 mtd
>>> "
>>>
>>> Use the following dfu-util invocation on Host PC to install binaries:
>>> "
>>> $ dfu-util -w -a 0 -D build/stm32mp1/release/tf-a-stm32mp135f-dhcor-dhsbc.stm32
>>> $ dfu-util -w -a 1 -D build/stm32mp1/release/tf-a-stm32mp135f-dhcor-dhsbc.stm32
>>> $ dfu-util -w -a 2 -D build/stm32mp1/release/fip.bin
>>> "
>>>
>>> Signed-off-by: Marek Vasut <marex at denx.de>
>>> ---
>>> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
>>> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
>>> Cc: Tom Rini <trini at konsulko.com>
>>> Cc: u-boot at dh-electronics.com
>>> Cc: u-boot at lists.denx.de
>>> Cc: uboot-stm32 at st-md-mailman.stormreply.com
>>> ---
>>>   include/configs/stm32mp13_common.h | 1 +
>>>   1 file changed, 1 insertion(+)
>>>
>>> diff --git a/include/configs/stm32mp13_common.h b/include/configs/stm32mp13_common.h
>>> index 5b0658ced92..d6e4f8fd915 100644
>>> --- a/include/configs/stm32mp13_common.h
>>> +++ b/include/configs/stm32mp13_common.h
>>> @@ -63,6 +63,7 @@
>>>       "fi;\0"
>>>     #define STM32MP_EXTRA \
>>> +    "dfu_alt_info=mtd nor0=fsbl1 raw 0x0 0x40000;fsbl2 raw 0x40000 0x40000;uboot raw 0x80000 0x160000\0" \
>>>       "env_check=if env info -p -d -q; then env save; fi\0" \
>>>       "boot_net_usb_start=true\0"
>>>   
>>
>>
>> Hi Marek
>>
>> On our STM32 board, the dfu_alt_info is build dynamically, we have CONFIG_SET_DFU_ALT_INFO enable
>> Can you add the dfu_alt_info in a specific stm32mp13_dhxx.common.h instead ?
> 
> You can drop this patch.


Ok thanks

Patrice