mx6cuboxi: failes to detect model

[Christian Gmeiner]

Hi Fabio

>
> > It got better but the model is (still) wrong:
> >
> > U-Boot 2024.04-rc5-dirty (Mar 26 2024 - 17:03:41 +0100)
> >
> > CPU:   Freescale i.MX6Q rev1.3 996 MHz (running at 792 MHz)
> > CPU:   Extended Commercial temperature grade (-20C to 105C) at 20C
> > Reset cause: POR
> > Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)
> > Board: MX6 HummingBoard2
> > DRAM:  2 GiB
> > Core:  82 devices, 17 uclasses, devicetree: fit
> > MMC:   FSL_SDHC: 1, FSL_SDHC: 2
> > Loading Environment from MMC... *** Warning - bad CRC, using default environment
>
> It seems to me that there is a mix of DM GPIO and non-DM GPIO.
>
> Does the change below help?
>
> --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
> +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
> @@ -336,20 +336,16 @@ static enum board_type board_type(void)
>          * HB             1     1    x
>          */
>
> -       gpio_direction_input(IMX_GPIO_NR(2, 8));
> -       val3 = gpio_get_value(IMX_GPIO_NR(2, 8));
> +       val3 = !!dm_gpio_get_value(&(board_detect_desc[0]));
>
>         if (val3 == 0)
>                 return HUMMINGBOARD2;
>
> -       gpio_direction_input(IMX_GPIO_NR(3, 4));
> -       val2 = gpio_get_value(IMX_GPIO_NR(3, 4));
> +       val2 = !!dm_gpio_get_value(&(board_detect_desc[1]));
>
>         if (val2 == 0)
>                 return HUMMINGBOARD;
> -
> -       gpio_direction_input(IMX_GPIO_NR(4, 9));
> -       val1 = gpio_get_value(IMX_GPIO_NR(4, 9));
> +       val1 = !!dm_gpio_get_value(&(board_detect_desc[2]));
>
>         if (val1 == 0) {
>                 return CUBOXI;


It does help \o/

When you send out a proper patch feel free to add Tested-by: Christian
Gmeiner <cgmeiner at igalia.com>

Time to look into the next broken thing on the device: network :)
-- 
greets
--
Christian Gmeiner, MSc

https://christian-gmeiner.info/privacypolicy