[PATCH v2 0/4] arm: Add Analog Devices SC5xx Machine Type

[Tom Rini]

On Wed, 24 Apr 2024 20:03:59 -0400, Greg Malysa wrote:

> This series adds support for the ADI SC5xx machine type and includes two
> core drivers that are required for being able to boot any board--a UART
> driver, the gptimer driver which is used as a clock reference (CNTVCNT
> is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our
> corresponding Linux support relies on u-boot configuring the clocks
> correctly before booting, so it is not possible to boot any board
> without the CGU/CDU configuration happening here. There are also no
> board files, device trees, or defconfigs included here, but some common
> definitions that will be used to build board files currently are. The
> sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and
> sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended
> to be a drop-in replacement for the SC594 in terms of peripherals, with
> a Cortex-A55 instead.
> 
> [...]

Applied to u-boot/next, thanks!

-- 
Tom