[PATCH v2 3/8] ram: k3-ddrss: Setup ECC region start and range
Santhosh Kumar K
s-k6 at ti.com
Fri May 10 10:47:02 CEST 2024
Setup the ECC region's start and range using the device private data,
ddrss->ddr_bank_base[0] and ddrss->ddr_ram_size. Also, move start and
range of ECC regions from 32 bits to 64 bits to accommodate for
DDR greater than or equal to 4GB.
Signed-off-by: Santhosh Kumar K <s-k6 at ti.com>
---
drivers/ram/k3-ddrss/k3-ddrss.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c
index 06c4dba4b857..6cf680972808 100644
--- a/drivers/ram/k3-ddrss/k3-ddrss.c
+++ b/drivers/ram/k3-ddrss/k3-ddrss.c
@@ -122,8 +122,8 @@ struct k3_msmc {
#define K3_DDRSS_MAX_ECC_REGIONS 3
struct k3_ddrss_ecc_region {
- u32 start;
- u32 range;
+ u64 start;
+ u64 range;
};
struct k3_ddrss_desc {
@@ -552,7 +552,7 @@ void k3_lpddr4_start(struct k3_ddrss_desc *ddrss)
}
}
-static void k3_ddrss_set_ecc_range_r0(u32 base, u32 start_address, u32 size)
+static void k3_ddrss_set_ecc_range_r0(u32 base, u64 start_address, u64 size)
{
writel((start_address) >> 16, base + DDRSS_ECC_R0_STR_ADDR_REG);
writel((start_address + size - 1) >> 16, base + DDRSS_ECC_R0_END_ADDR_REG);
@@ -728,13 +728,13 @@ static void k3_ddrss_lpddr4_ecc_calc_reserved_mem(struct k3_ddrss_desc *ddrss)
static void k3_ddrss_lpddr4_ecc_init(struct k3_ddrss_desc *ddrss)
{
- u32 ecc_region_start = ddrss->ecc_regions[0].start;
- u32 ecc_range = ddrss->ecc_regions[0].range;
+ u64 ecc_region_start = ddrss->ecc_regions[0].start;
+ u64 ecc_range = ddrss->ecc_regions[0].range;
u32 base = (u32)ddrss->ddrss_ss_cfg;
u32 val;
/* Only Program region 0 which covers full ddr space */
- k3_ddrss_set_ecc_range_r0(base, ecc_region_start - gd->ram_base, ecc_range);
+ k3_ddrss_set_ecc_range_r0(base, ecc_region_start - ddrss->ddr_bank_base[0], ecc_range);
/* Enable ECC, RMW, WR_ALLOC */
writel(DDRSS_ECC_CTRL_REG_ECC_EN | DDRSS_ECC_CTRL_REG_RMW_EN |
@@ -800,8 +800,8 @@ static int k3_ddrss_probe(struct udevice *dev)
k3_ddrss_lpddr4_ecc_calc_reserved_mem(ddrss);
/* Always configure one region that covers full DDR space */
- ddrss->ecc_regions[0].start = gd->ram_base;
- ddrss->ecc_regions[0].range = gd->ram_size - ddrss->ecc_reserved_space;
+ ddrss->ecc_regions[0].start = ddrss->ddr_bank_base[0];
+ ddrss->ecc_regions[0].range = ddrss->ddr_ram_size - ddrss->ecc_reserved_space;
k3_ddrss_lpddr4_ecc_init(ddrss);
}
--
2.34.1
More information about the U-Boot
mailing list