[PATCH v2 4/8] ram: k3-ddrss: Enable ECC interrupts

[Santhosh Kumar K]

Enable ECC 1-bit error, 2-bit error, multiple 1-bit error interrupts
by setting the respective bits in the DDRSS_V2A_INT_SET_REG register.

Signed-off-by: Santhosh Kumar K <s-k6 at ti.com>
---
 drivers/ram/k3-ddrss/k3-ddrss.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c
index 6cf680972808..5bc625fc2db6 100644
--- a/drivers/ram/k3-ddrss/k3-ddrss.c
+++ b/drivers/ram/k3-ddrss/k3-ddrss.c
@@ -46,6 +46,11 @@
 #define DDRSS_ECC_R2_STR_ADDR_REG		0x0140
 #define DDRSS_ECC_R2_END_ADDR_REG		0x0144
 #define DDRSS_ECC_1B_ERR_CNT_REG		0x0150
+#define DDRSS_V2A_INT_SET_REG			0x00a8
+
+#define DDRSS_V2A_INT_SET_REG_ECC1BERR_EN	BIT(3)
+#define DDRSS_V2A_INT_SET_REG_ECC2BERR_EN	BIT(4)
+#define DDRSS_V2A_INT_SET_REG_ECCM1BERR_EN	BIT(5)
 
 #define SINGLE_DDR_SUBSYSTEM	0x1
 #define MULTI_DDR_SUBSYSTEM	0x2
@@ -748,6 +753,9 @@ static void k3_ddrss_lpddr4_ecc_init(struct k3_ddrss_desc *ddrss)
 	/* Clear Error Count Register */
 	writel(0x1, base + DDRSS_ECC_1B_ERR_CNT_REG);
 
+	writel(DDRSS_V2A_INT_SET_REG_ECC1BERR_EN | DDRSS_V2A_INT_SET_REG_ECC2BERR_EN |
+		   DDRSS_V2A_INT_SET_REG_ECCM1BERR_EN, base + DDRSS_V2A_INT_SET_REG);
+
 	/* Enable ECC Check */
 	val = readl(base + DDRSS_ECC_CTRL_REG);
 	val |= DDRSS_ECC_CTRL_REG_ECC_CK;
-- 
2.34.1